Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Perry, “The New ZGS Injector Proposal”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART1-9, pp. 110-122.
[n] T. Schultheiss et al., “RF/Thermal/Structural Analysis of the APT LEDA Hot Model Cavity Assembly”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH087, pp. 969-971.
[n] E. Knapp, “800 MeV RF Structures”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART1-3, pp. 31-59.
[n] K. D. Jacobs et al., “Commissioning Low Emittance Beam at Aladdin”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB027, pp. 887-889.
[n] S. Arai et al., “First Beam Tests of the INS Split Coaxial RFQ for Radioactive Nuclei”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG13, pp. 351-353.
[n] R. Li, B. C. Yunn, V. A. Lebedev, and J. J. Bisognano, “Analysis of Beam-Beam Kink Instability in a Linac-Ring Electron-Ion Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH151, pp. 2014-2016.
[n] J. Boillot et al., “Operation-Oriented Computer Controls for CERN PS Complex”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2261-2264.
[n] S. Schreiber, C. Gr??n, K. Klose, J. R?Ânsch-Schulenburg, and B. Steffen, “FLASH Photoinjector Laser Systems”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 430-433. doi:10.18429/JACoW-FEL2019-WEP048
[n] D. A. Vasiliev, V. T. Baranov, V. A. Kalinin, O. P. Lebedev, A. Lutchev, and D. A. Savin, “Treatment of the Results Measurement of Profile Beam Using Wire Scanners at Accelerator U-70 IHEP”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 410-412. doi:10.18429/JACoW-RuPAC2021-WEPSC34
[n] V. Lebedev and S. Nagaitsev, “Particle Diffusion due to Coulomb Scattering”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE074, pp. 1362-1364.
[n] A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_005.
[n] V. G. Vaccaro et al., “Study of the Dynamics in a Linac Booster for Proton Therapy in the 30-62 MeV Energy Range”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP037, pp. 2494-2496.
[n] A. Stillman, “The Slow Control System of the Muon g-2 Experiment”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA09, pp. 2211-2213.
[n] B. Han, D. J. Newland, T. Hunter, and M. P. Stockli, “Physics Design of a Prototype 2-Solenoid LEBT for the SNS Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP038, pp. 1564-1566.
[n] J. Hill et al., “EPICS and WANs: Tradeoffs between Isolation, Security, Robustness, and Transparency”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP508, pp. XX-XX.
[n] B. Mikulec et al., “Linac4 Beam Characterisation before Injection into the CERN PS Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP055, pp. 4893-4895.
[n] R. Avery and D. J. Breuner, “Controlling Accelerator Engineering Costs”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 540-544.
[n] E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
[n] J. Campmany, L. G. O. Garcia-Orta, J. Marcos, and V. Massana, “Developments and Measurements Done at ALBA Magnetic Measurements Laboratory Along 2016”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4266-4268. doi:10.18429/JACoW-IPAC2017-THPIK079
[n] N. M. Cook et al., “Modeling and Evaluation Thermionic Energy Converters in the Space-Charge Limit”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEZBB5, unpublished.
[n] R. D. Kohaupt, “Multi-bunch Instabilities: Observations, Cures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 269-273.
[n] B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “A Proposal to Pulse the Bevatron/Bevalac Main Guide Field Magnet with SCR Power Supplies”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1893-1896.
[n] S. Rosily, S. Krishnagopal, and S. Singh, “Electronics for Bead-pull Measurement of Radio Frequency Accelerating Structures in LEHIPA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 993-995. doi:10.18429/JACoW-IPAC2021-MOPAB322
[n] Y. T. Huang, C. K. Chan, C. S. Chen, J.-R. Chen, G.-Y. Hsiung, and Y.-H. Liu, “Relief of an Electric Field via a Cone Structure”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 550-553. doi:10.18429/JACoW-IPAC2014-MOPME078
[n] M. A. Green et al., “Design, Testing, and Commissioning of an Electromagnetic Undulator for SRC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA19, pp. 2659-2661.
[n] J. L. Baelde et al., “The SISSI Facility at GANIL”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP050G, pp. 2403-2405.
[n] R. L. Martin, J. M. Bogaty, A. Moretti, N. Q. Sesol, J. M. Watson, and A. J. Wright, “Operation and Status of the ANL Heavy Ion Fusion Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper J101, pp. 341-343.
[n] A. I. Warwick, “Alumino-Silicate Ion Sources for Accelerator Applications”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1809-1812.
[n] D. Cornuet, “The Magnet System of the Electron Positron Accumulator (EPA)”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1030-1033.
[n] M. Koopmans et al., “Preparations for beam commissioning of the carbon RFQ at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5020-5023. doi:10.18429/JACoW-IPAC2023-THPM057
[n] P. Krejcik et al., “SCU Development at the LCLS for Future FELs”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH1D3, unpublished.
[n] P. Girault, “The 3pi/4 Backward TW Structure for the ELETTRA 1.5 GeV Electron Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3005-3008.
[n] N. Kaneko, O. Azuma, Y. Hoshi, H. Iwata, T. Nakashizu, and M. Y. Yamamoto, “45 MeV Linac for the 800 MeV Synchrotron Radiation Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2990-2993.
[n] A. Kaminsky, “LUE200-Driver Linac for Intense Resonant Neutron Spectrometer”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP69, pp. 508-510.
[n] T. Watanabe, N. Fukunishi, M. Kase, Y. Sasaki, and Y. Yano, “Development of Beam Current Monitor with HTS SQUID and HTS Current Sensor”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-05, pp. 109-113.
[n] A. Halavanau et al., “Status of cavity-based X-ray free electron laser project at SLAC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG44, unpublished.
[n] M. Shibata, “Neutrino Beam Line at J-PARC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP106, pp. 3614-3616.
[n] A. Burov and V. Lebedev, “Transverse Resistive Wall Impedance for Multi-Layer Flat Chambers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI022, pp. 1455-1457.
[n] G. Niehues et al., “Electro-Optical Diagnostics at KARA and FLUTE - Results and Prospects”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 927-930. doi:10.18429/JACoW-IPAC2021-MOPAB293
[n] S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 649-654. doi:10.18429/JACoW-ICALEPCS2017-TUPHA101
[n] A. Beuret and P. Proudlock, “Regulation of Geographically Separated Master / Slave Power Converters Without External Communication”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1194-1197.
[n] D. Liska, L. Carlisle, R. Garnett, T. Larkin, G. Lawrence, and P. Smith, “Mechanical Features of a 700-MHz Bridge-Coupled Drift-Tube Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-38, pp. 148-150.
[n] M. Martino, P. Arpaia, and S. Ierardi, “Impact of Flux Jumps on High-Precision Powering of Nb?Sn Superconducting Magnets”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1338-1340. doi:10.18429/JACoW-IPAC2019-TUPMP040
[n] N. Cook et al., “Integrating community codes for accelerator design and optimization”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS053, unpublished.
[n] E. Calvo Giraldo et al., “The Diamond Beam Loss Monitoring System at CERN LHC and SPS”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 202-206. doi:10.18429/JACoW-IBIC2022-TU2C2
[n] G. Lopez, “Constant of Motion and Dynamic Equations for One Dimensional Autonomous System, and Radiation Damping”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 392-395.
[n] M. Huyse et al., “A Radioactive Ion Beam Facility at Louvain-La-Neuve”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1491-1494.
[n] M. G. Ibison, D. J. Holder, K. M. Hock, B. D. Muratori, and A. Wolski, “Modeling Space-charge and its Influence on the Measurement of Phase Space in ALICE by Tomographic Methods”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR059, pp. 918-920.
[n] D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 112-115.
[n] Y. Jongen, C. Pirart, G. Ryckewaert, and J. Steyaert, “An Electron Cyclotron Resonance Source for CYCLONE”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-09, pp. 2160-2163.
[n] T. A. Welton, “Factors Affecting Beam Quality”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D04, pp. 192-198.
[n] D. Giove et al., “Dosimetry and first radiobiological assay of multi-Gy, multi-MeV TNSA proton beam with ultrahigh dose-rate”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2131-2134. doi:10.18429/JACoW-IPAC2023-TUPL165
[n] M. E. Read, V. Granatstein, L. Ives, W. Lawson, G. Miram, and G. Nusinovich, “A Magnetron Injection Gun with Inverted Geometry for an 80 MW Gyroklystron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE027, pp. 1140-1141.
[n] L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686.
[n] G. DiMassa and A. G. Ruggiero, “General Analysis of Beam Position Monitors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1565-1568.
[n] B. Autin and E. Wildner, “Application of Symbolic Techniques to Structural Beam Optics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP030G, pp. 1253-1255.
[n] R. L. Wood, “Thermal/Structural Design and Fabrication Development of High Power CCDTL and CCL Structures”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP41, pp. 752-754.
[n] S. Muszala, R. Pundaleeka, N. Wang, and S. G. Shasharina, “Grid and Component Technologies in Physics Applications”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOPB01, pp. 29-33.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Perry, “The New ZGS Injector Proposal”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART1-9, pp. 110-122.
- T. Schultheiss et al., “RF/Thermal/Structural Analysis of the APT LEDA Hot Model Cavity Assembly”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH087, pp. 969-971.
- E. Knapp, “800 MeV RF Structures”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART1-3, pp. 31-59.
- K. D. Jacobs et al., “Commissioning Low Emittance Beam at Aladdin”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB027, pp. 887-889.
- S. Arai et al., “First Beam Tests of the INS Split Coaxial RFQ for Radioactive Nuclei”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG13, pp. 351-353.
- R. Li, B. C. Yunn, V. A. Lebedev, and J. J. Bisognano, “Analysis of Beam-Beam Kink Instability in a Linac-Ring Electron-Ion Collider”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH151, pp. 2014-2016.
- J. Boillot et al., “Operation-Oriented Computer Controls for CERN PS Complex”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2261-2264.
- S. Schreiber, C. Gr??n, K. Klose, J. R?Ânsch-Schulenburg, and B. Steffen, “FLASH Photoinjector Laser Systems”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 430-433.
- D. A. Vasiliev, V. T. Baranov, V. A. Kalinin, O. P. Lebedev, A. Lutchev, and D. A. Savin, “Treatment of the Results Measurement of Profile Beam Using Wire Scanners at Accelerator U-70 IHEP”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 410-412.
- V. Lebedev and S. Nagaitsev, “Particle Diffusion due to Coulomb Scattering”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE074, pp. 1362-1364.
- A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_005.
- V. G. Vaccaro et al., “Study of the Dynamics in a Linac Booster for Proton Therapy in the 30-62 MeV Energy Range”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP037, pp. 2494-2496.
- A. Stillman, “The Slow Control System of the Muon g-2 Experiment”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA09, pp. 2211-2213.
- B. Han, D. J. Newland, T. Hunter, and M. P. Stockli, “Physics Design of a Prototype 2-Solenoid LEBT for the SNS Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP038, pp. 1564-1566.
- J. Hill et al., “EPICS and WANs: Tradeoffs between Isolation, Security, Robustness, and Transparency”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP508, pp. XX-XX.
- B. Mikulec et al., “Linac4 Beam Characterisation before Injection into the CERN PS Booster”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP055, pp. 4893-4895.
- R. Avery and D. J. Breuner, “Controlling Accelerator Engineering Costs”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 540-544.
- E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
- J. Campmany, L. G. O. Garcia-Orta, J. Marcos, and V. Massana, “Developments and Measurements Done at ALBA Magnetic Measurements Laboratory Along 2016”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4266-4268.
- N. M. Cook et al., “Modeling and Evaluation Thermionic Energy Converters in the Space-Charge Limit”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEZBB5, unpublished.
- R. D. Kohaupt, “Multi-bunch Instabilities: Observations, Cures”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 269-273.
- B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “A Proposal to Pulse the Bevatron/Bevalac Main Guide Field Magnet with SCR Power Supplies”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1893-1896.
- S. Rosily, S. Krishnagopal, and S. Singh, “Electronics for Bead-pull Measurement of Radio Frequency Accelerating Structures in LEHIPA”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 993-995.
- Y. T. Huang, C. K. Chan, C. S. Chen, J.-R. Chen, G.-Y. Hsiung, and Y.-H. Liu, “Relief of an Electric Field via a Cone Structure”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 550-553.
- M. A. Green et al., “Design, Testing, and Commissioning of an Electromagnetic Undulator for SRC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA19, pp. 2659-2661.
- J. L. Baelde et al., “The SISSI Facility at GANIL”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP050G, pp. 2403-2405.
- R. L. Martin, J. M. Bogaty, A. Moretti, N. Q. Sesol, J. M. Watson, and A. J. Wright, “Operation and Status of the ANL Heavy Ion Fusion Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper J101, pp. 341-343.
- A. I. Warwick, “Alumino-Silicate Ion Sources for Accelerator Applications”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1809-1812.
- D. Cornuet, “The Magnet System of the Electron Positron Accumulator (EPA)”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1030-1033.
- M. Koopmans et al., “Preparations for beam commissioning of the carbon RFQ at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM057, pp. 5020-5023.
- P. Krejcik et al., “SCU Development at the LCLS for Future FELs”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH1D3, unpublished.
- P. Girault, “The 3pi/4 Backward TW Structure for the ELETTRA 1.5 GeV Electron Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3005-3008.
- N. Kaneko, O. Azuma, Y. Hoshi, H. Iwata, T. Nakashizu, and M. Y. Yamamoto, “45 MeV Linac for the 800 MeV Synchrotron Radiation Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2990-2993.
- A. Kaminsky, “LUE200-Driver Linac for Intense Resonant Neutron Spectrometer”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP69, pp. 508-510.
- T. Watanabe, N. Fukunishi, M. Kase, Y. Sasaki, and Y. Yano, “Development of Beam Current Monitor with HTS SQUID and HTS Current Sensor”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper WE-05, pp. 109-113.
- A. Halavanau et al., “Status of cavity-based X-ray free electron laser project at SLAC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG44, unpublished.
- M. Shibata, “Neutrino Beam Line at J-PARC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP106, pp. 3614-3616.
- A. Burov and V. Lebedev, “Transverse Resistive Wall Impedance for Multi-Layer Flat Chambers”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI022, pp. 1455-1457.
- G. Niehues et al., “Electro-Optical Diagnostics at KARA and FLUTE - Results and Prospects”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 927-930.
- S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 649-654.
- A. Beuret and P. Proudlock, “Regulation of Geographically Separated Master / Slave Power Converters Without External Communication”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1194-1197.
- D. Liska, L. Carlisle, R. Garnett, T. Larkin, G. Lawrence, and P. Smith, “Mechanical Features of a 700-MHz Bridge-Coupled Drift-Tube Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-38, pp. 148-150.
- M. Martino, P. Arpaia, and S. Ierardi, “Impact of Flux Jumps on High-Precision Powering of Nb?Sn Superconducting Magnets”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1338-1340.
- N. Cook et al., “Integrating community codes for accelerator design and optimization”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS053, this conference.
- E. Calvo Giraldo et al., “The Diamond Beam Loss Monitoring System at CERN LHC and SPS”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 202-206.
- G. Lopez, “Constant of Motion and Dynamic Equations for One Dimensional Autonomous System, and Radiation Damping”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 392-395.
- M. Huyse et al., “A Radioactive Ion Beam Facility at Louvain-La-Neuve”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1491-1494.
- M. G. Ibison, D. J. Holder, K. M. Hock, B. D. Muratori, and A. Wolski, “Modeling Space-charge and its Influence on the Measurement of Phase Space in ALICE by Tomographic Methods”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR059, pp. 918-920.
- D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 112-115.
- Y. Jongen, C. Pirart, G. Ryckewaert, and J. Steyaert, “An Electron Cyclotron Resonance Source for CYCLONE”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-09, pp. 2160-2163.
- T. A. Welton, “Factors Affecting Beam Quality”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D04, pp. 192-198.
- D. Giove et al., “Dosimetry and first radiobiological assay of multi-Gy, multi-MeV TNSA proton beam with ultrahigh dose-rate”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL165, pp. 2131-2134.
- M. E. Read, V. Granatstein, L. Ives, W. Lawson, G. Miram, and G. Nusinovich, “A Magnetron Injection Gun with Inverted Geometry for an 80 MW Gyroklystron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE027, pp. 1140-1141.
- L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686.
- G. DiMassa and A. G. Ruggiero, “General Analysis of Beam Position Monitors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1565-1568.
- B. Autin and E. Wildner, “Application of Symbolic Techniques to Structural Beam Optics”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP030G, pp. 1253-1255.
- R. L. Wood, “Thermal/Structural Design and Fabrication Development of High Power CCDTL and CCL Structures”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP41, pp. 752-754.
- S. Muszala, R. Pundaleeka, N. Wang, and S. G. Shasharina, “Grid and Component Technologies in Physics Applications”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOPB01, pp. 29-33.
Back to search