Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4392-4394. doi:10.18429/JACoW-IPAC2017-THPIK124
[n] G. Renaud, G. Abeille, E. Elkaim, E. Fonda, F. Langlois, and J. Malik, “Continuous Scan at Synchrotron Soleil”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP054, pp. 507-509.
[n] Y. Jiao, M. Li, and X. Y. Li, “Brightness Dependence Investigation and Optimizaiton for the Heps”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1390-1393. doi:10.18429/JACoW-IPAC2018-TUPMF056
[n] Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
[n] Y. X. Zhang et al., “Coaxial Input Coupler Design For Wuhan Advanced Light Source”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM070, unpublished.
[n] B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
[n] D. M. Welsch, A. Lehrach, B. Lorentz, R. Maier, D. Prasuhn, and R. T?Âlle, “Investigation and Optimization of Transverse Non-linear Beam Dynamics in the High-energy Storage Ring HESR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE063, pp. 4659-4661.
[n] Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
[n] A. Guirao, D. Jimenez, L. M. Martinez Fresno, J. Molla, and I. Podadera, “Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC12, pp. 71-74.
[n] S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
[n] M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
[n] C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 252-254. doi:10.18429/JACoW-LINAC2022-MOPORI11
[n] J. W. Lewellen et al., “A Flexible Injector Test Stand Design”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB004, pp. 2038-2040.
[n] J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2345-2348. doi:10.18429/JACoW-IPAC2019-WEPMP018
[n] R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
[n] Y. Liao, W. Wang, X. Liu, Q. Chen, and B. Qin, “A large momentum acceptance gantry for light-weight proton therapy facility: its beam lattice, magnets design and clinical advantages”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3632-3634. doi:10.18429/JACoW-IPAC2024-THPR51
[n] A. Leduc et al., “Plasma Modelization and Study for the PHOENIX V3 ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 176-179. doi:10.18429/JACoW-ECRIS2018-WEB2
[n] F. Staufenbiel et al., “Test of the Photocathode Cooling System of the 312 Cell SRF Gun”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP23, pp. 284-286.
[n] Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1574-1576. doi:10.18429/JACoW-IPAC2018-TUPML020
[n] S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 82-85. doi:10.18429/JACoW-ICALEPCS2015-MOM308
[n] V. V. Kashikhin, V. Lombardo, and G. Velev, “Magnet Design Optimization for Future Hardon Colliders”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4307-4310. doi:10.18429/JACoW-IPAC2019-THPTS084
[n] H. Yuan, “Design and Optimization of a 2MeV X-Band Side Coupled Accelerating Structure”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4193-4195. doi:10.18429/JACoW-IPAC2017-THPIK043
[n] S. Sergey, S. Maslennikov, E. Shkolnikov, and A. Agafonov, “Dynamics of Plasma-Beam Formations in the Acceleration Gap of the Pulse Neutron Generator-based Vacuum Neutron Tube”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC52, pp. 447-449.
[n] F. Micolon and M. Sosin, “Design of a High-Precision Lifting System for the HL-LHC Heavy Components in the Interaction Region”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 255. doi:10.18429/JACoW-MEDSI2020-WEPA13
[n] V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
[n] L. Giannessi et al., “The Fermi Seeded FEL Facility: Operational Experience and Future Perspectives”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 57-60. doi:10.18429/JACoW-FEL2015-MOP013
[n] E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
[n] M. Znidarcic, E. Janezic, and K. Lang, “Beam Position Monitor for Circular Proton Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 267-269. doi:10.18429/JACoW-IPAC2016-MOPMR018
[n] Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
[n] M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
[n] I. V. Gribov, I. V. Shvedunov, and V. R. Yaliyan, “RaceTrack Microtron Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH024, pp. 819-821.
[n] Y. Jiao, X. Y. Li, and G. Xu, “Performance Comparison of Different Ultralow Emittance Unit Cells”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1382-1385. doi:10.18429/JACoW-IPAC2018-TUPMF054
[n] E. Matias, “Friday Closeout Presentation”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
[n] B. Song et al., “Time-of-flight control and passive compression in an Alpha-magnet beamline for MHz MeV UED”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5662, unpublished.
[n] L. M. A. Ferreira, S. Calatroni, S. Forel, and J. A. Shirra, “Niobium Cavity Electropolishing Modelling and Optimisation”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP047, pp. 518-520.
[n] F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 357. doi:10.18429/JACoW-MEDSI2020-THOB02
[n] J. F. Zhang et al., “A Particle-in-Cell/Monte-Carlo-Collision Code for the Simulation of Stepwise Ionization of Lithium in 2.45 GHz ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 148-151. doi:10.18429/JACoW-ECRIS2018-TUP26
[n] A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
[n] S. V. Efimov, “Fringing Field Effects of the Plane Undulator on Beam Dynamics in Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 664-667.
[n] D. Teytelman, J. M. Byrd, J. Cao, and J. Yue, “Measurements of Coupled-Bunch Instabilities in BEPC-II”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP069, pp. 4114-4116.
[n] H. H. Lu et al., “A Permanent Magnet Phase Shifter for the European-XFEL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH047, pp. 356-358.
[n] P. Chitnis, T. G. Robertazzi, and K. A. Brown, “Understanding the Failure Characteristics of the Beam Permit System of RHIC at BNL”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 382-385. doi:10.18429/JACoW-ICALEPCS2015-MOPGF129
[n] S. M. Polozov et al., “Design of Linac-100 and Linac-30 for New Rare Isotope Facility Project DERICA at JINR”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 220-225. doi:10.18429/JACoW-HB2018-WEP1WB04
[n] V. B. Reva et al., “COSY 2 MeV Cooler: Design, Diagnostic and Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 777-779. doi:10.18429/JACoW-IPAC2014-MOPRI075
[n] J. W. Staples, W. Chou, R. Keller, P. N. Ostroumov, and A. Sessler, “RF-Based Accelerators for HEDP Research”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP023, pp. 1829-1831.
[n] D. S. Foudeh, E. Huttel, and N. Kh. Sawai, “The RF System of the SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4187-4189. doi:10.18429/JACoW-IPAC2017-THPIK041
[n] A. Blednykh et al., “Performance Strategy for the First Years of the EIC Science Program”, presented at the IPAC'26, Deauville, France, May 2026, paper WEO1T02, unpublished.
[n] A. Aspart, C. Z. Antoine, and F. Eozenou, “Aluminium and Sulphur Impurities in Electropolishing Baths”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP03, pp. 455-458.
[n] K. Zenker, U. Lehnert, A. E. Rivera Osorio, R. Steinbrück, and M. Kuntzsch, “Wide range low cost digital RF phase shifter”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 546-550. doi:10.18429/JACoW-IBIC2025-TUPMO32
[n] M. Ferianis et al., “Generation and Distribution of Stable Timing Signals to Synchronize RF and Lasers at the FERMI FEL Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP041, pp. XX-XX.
[n] F. Turkot, “Attainment of 500-GeV Beam in the Fermilab Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1512-1515.
[n] I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1927-1930.
[n] Z. Hao, G. Fan, H. Wang, H. Xu, L. Liu, and Y. Zhang, “Gamma beam modulation in Shanghai Laser Electron Gamma Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2162-2165. doi:10.18429/JACoW-IPAC2024-WEPC82
[n] H.-C. Hseuh et al., “Status of NSLS-II Storage Ring Vacuum Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP227, pp. 1244-1246.
[n] C. Huang et al., “Simulations of 25 GeV PWFA Sections: Path Towards a PWFA Linear Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP097, pp. 3025-3027.
[n] X. Y. Li, Z. Duan, Y. Jiao, and S. K. Tian, “Phase Matching Application in Hard X-Ray Region of HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1386-1389. doi:10.18429/JACoW-IPAC2018-TUPMF055
[n] G. V. Dolbilov et al., “Status of SILUND-21 Linear Induction Accelerator Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 748-751.
[n] V. L. Uvarov et al., “Beam-power Calibration System for Industrial Electron Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT141, pp. 2167-2169.
[n] H. Baba, S. Inagaki, M. Kobayashi, S. Okumura, and J. Tanaka, “Pulsed Drift Tube Quadrupole Magnets with High Precision”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper H04, pp. 205-208.
[n] E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 513-515. doi:10.18429/JACoW-LINAC2018-TUPO076
[n] X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
[n] A. Buechner and B. Lange, “A New High-Dynamic Range BPM for ELBE with Integrated Differential Current Monitor (DCM)”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC22, pp. 104-107.
[n] F. Forest et al., “Magnetic Measurements of the Booster Dipole Magnets for the ALBA Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP035, pp. 217-219.
[n] T. Kikuchi, T. Katayama, and S. M. Lund, “Possible Parameters for Bunch Compression in a Ring in Future RIKEN Projects”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15015, pp. XX-XX.
[n] A. P. Strokach, O. G. Filatov, A. V. Stepanov, and M. F. Vorogushin, “Prospects for Introduction of Home-Made Equipment for Radionuclide Diagnostics”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRACH05, pp. 197-199.
[n] U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
[n] D. K. Desjardins, A. C. Carcy, J. L. Giorgetta, C. Menneglier, M. Scheel, and T. Weitkamp, “Design of Indirect X-Ray Detectors for Tomography on the Anatomix Beamline”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 355-357. doi:10.18429/JACoW-MEDSI2018-THPH09
[n] C. Sun, S. James, K. Muriki, H. Nishimura, Y. Qin, and K. Song, “HPC Cloud Applied to Lattice Optimization”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP151, pp. 1767-1769.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4392-4394.
- G. Renaud, G. Abeille, E. Elkaim, E. Fonda, F. Langlois, and J. Malik, “Continuous Scan at Synchrotron Soleil”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP054, pp. 507-509.
- Y. Jiao, M. Li, and X. Y. Li, “Brightness Dependence Investigation and Optimizaiton for the Heps”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1390-1393.
- Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
- Y. X. Zhang et al., “Coaxial Input Coupler Design For Wuhan Advanced Light Source”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM070, unpublished.
- B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
- D. M. Welsch, A. Lehrach, B. Lorentz, R. Maier, D. Prasuhn, and R. T?Âlle, “Investigation and Optimization of Transverse Non-linear Beam Dynamics in the High-energy Storage Ring HESR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE063, pp. 4659-4661.
- Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
- A. Guirao, D. Jimenez, L. M. Martinez Fresno, J. Molla, and I. Podadera, “Development of the New Electronic Instrumentation for the LIPAc/IFMIF Beam Position Monitors”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC12, pp. 71-74.
- S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
- M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
- C. Barthe-Dejean, F. Lutton, and M. Michel, “Seismic Analysis for Safety Requirements of SPIRAL2 Accelerator”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 252-254.
- J. W. Lewellen et al., “A Flexible Injector Test Stand Design”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB004, pp. 2038-2040.
- J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2345-2348.
- R. Zeng et al., “Design of the Phase Reference Distribution System at ESS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP043, pp. 529-531.
- Y. Liao, W. Wang, X. Liu, Q. Chen, and B. Qin, “A large momentum acceptance gantry for light-weight proton therapy facility: its beam lattice, magnets design and clinical advantages”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR51, pp. 3632-3634.
- A. Leduc et al., “Plasma Modelization and Study for the PHOENIX V3 ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 176-179.
- F. Staufenbiel et al., “Test of the Photocathode Cooling System of the 312 Cell SRF Gun”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP23, pp. 284-286.
- Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1574-1576.
- S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 82-85.
- V. V. Kashikhin, V. Lombardo, and G. Velev, “Magnet Design Optimization for Future Hardon Colliders”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4307-4310.
- H. Yuan, “Design and Optimization of a 2MeV X-Band Side Coupled Accelerating Structure”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4193-4195.
- S. Sergey, S. Maslennikov, E. Shkolnikov, and A. Agafonov, “Dynamics of Plasma-Beam Formations in the Acceleration Gap of the Pulse Neutron Generator-based Vacuum Neutron Tube”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC52, pp. 447-449.
- F. Micolon and M. Sosin, “Design of a High-Precision Lifting System for the HL-LHC Heavy Components in the Interaction Region”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 255.
- V. Gostishchev, C. Dimopoulou, A. Dolinskii, F. Nolden, and M. Steck, “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP20, pp. 210-212.
- L. Giannessi et al., “The Fermi Seeded FEL Facility: Operational Experience and Future Perspectives”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 57-60.
- E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
- M. Znidarcic, E. Janezic, and K. Lang, “Beam Position Monitor for Circular Proton Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 267-269.
- Q. Jin et al., “The Commission of a 2MeV X-Band SW Accelerating Guide”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D039, pp. 178-180.
- M. Lechartier, D. Besnier, J. F. Leyge, and M. Michel, “Design of the MEBT Rebunchers for the SPIRAL 2 Driver”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper C-09, pp. 278-281.
- I. V. Gribov, I. V. Shvedunov, and V. R. Yaliyan, “RaceTrack Microtron Control System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH024, pp. 819-821.
- Y. Jiao, X. Y. Li, and G. Xu, “Performance Comparison of Different Ultralow Emittance Unit Cells”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1382-1385.
- E. Matias, “Friday Closeout Presentation”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
- B. Song et al., “Time-of-flight control and passive compression in an Alpha-magnet beamline for MHz MeV UED”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5662, this conference.
- L. M. A. Ferreira, S. Calatroni, S. Forel, and J. A. Shirra, “Niobium Cavity Electropolishing Modelling and Optimisation”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP047, pp. 518-520.
- F. Yang, D. La Civita, H. Sinn, and M. Vannoni, “Heat Load Simulation of Optic Materials at European XFEL”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 357.
- J. F. Zhang et al., “A Particle-in-Cell/Monte-Carlo-Collision Code for the Simulation of Stepwise Ionization of Lithium in 2.45 GHz ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 148-151.
- A. Nassiri, T. Berenc, J. Foster, G. Waldschmidt, and J. Zhou, “A Photocathode RF Gun Design for a mm-Wave Linac-Based FEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB06, pp. 961-963.
- S. V. Efimov, “Fringing Field Effects of the Plane Undulator on Beam Dynamics in Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 664-667.
- D. Teytelman, J. M. Byrd, J. Cao, and J. Yue, “Measurements of Coupled-Bunch Instabilities in BEPC-II”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP069, pp. 4114-4116.
- H. H. Lu et al., “A Permanent Magnet Phase Shifter for the European-XFEL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH047, pp. 356-358.
- P. Chitnis, T. G. Robertazzi, and K. A. Brown, “Understanding the Failure Characteristics of the Beam Permit System of RHIC at BNL”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 382-385.
- S. M. Polozov et al., “Design of Linac-100 and Linac-30 for New Rare Isotope Facility Project DERICA at JINR”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 220-225.
- V. B. Reva et al., “COSY 2 MeV Cooler: Design, Diagnostic and Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 777-779.
- J. W. Staples, W. Chou, R. Keller, P. N. Ostroumov, and A. Sessler, “RF-Based Accelerators for HEDP Research”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP023, pp. 1829-1831.
- D. S. Foudeh, E. Huttel, and N. Kh. Sawai, “The RF System of the SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4187-4189.
- A. Blednykh et al., “Performance Strategy for the First Years of the EIC Science Program”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEO1T02, this conference.
- A. Aspart, C. Z. Antoine, and F. Eozenou, “Aluminium and Sulphur Impurities in Electropolishing Baths”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP03, pp. 455-458.
- K. Zenker, U. Lehnert, A. E. Rivera Osorio, R. Steinbrück, and M. Kuntzsch, “Wide range low cost digital RF phase shifter”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 546-550.
- M. Ferianis et al., “Generation and Distribution of Stable Timing Signals to Synchronize RF and Lasers at the FERMI FEL Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP041, pp. XX-XX.
- F. Turkot, “Attainment of 500-GeV Beam in the Fermilab Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1512-1515.
- I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1927-1930.
- Z. Hao, G. Fan, H. Wang, H. Xu, L. Liu, and Y. Zhang, “Gamma beam modulation in Shanghai Laser Electron Gamma Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC82, pp. 2162-2165.
- H.-C. Hseuh et al., “Status of NSLS-II Storage Ring Vacuum Systems”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP227, pp. 1244-1246.
- C. Huang et al., “Simulations of 25 GeV PWFA Sections: Path Towards a PWFA Linear Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP097, pp. 3025-3027.
- X. Y. Li, Z. Duan, Y. Jiao, and S. K. Tian, “Phase Matching Application in Hard X-Ray Region of HEPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1386-1389.
- G. V. Dolbilov et al., “Status of SILUND-21 Linear Induction Accelerator Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 748-751.
- V. L. Uvarov et al., “Beam-power Calibration System for Industrial Electron Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT141, pp. 2167-2169.
- H. Baba, S. Inagaki, M. Kobayashi, S. Okumura, and J. Tanaka, “Pulsed Drift Tube Quadrupole Magnets with High Precision”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper H04, pp. 205-208.
- E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 513-515.
- X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
- A. Buechner and B. Lange, “A New High-Dynamic Range BPM for ELBE with Integrated Differential Current Monitor (DCM)”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC22, pp. 104-107.
- F. Forest et al., “Magnetic Measurements of the Booster Dipole Magnets for the ALBA Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP035, pp. 217-219.
- T. Kikuchi, T. Katayama, and S. M. Lund, “Possible Parameters for Bunch Compression in a Ring in Future RIKEN Projects”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15015, pp. XX-XX.
- A. P. Strokach, O. G. Filatov, A. V. Stepanov, and M. F. Vorogushin, “Prospects for Introduction of Home-Made Equipment for Radionuclide Diagnostics”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRACH05, pp. 197-199.
- U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
- D. K. Desjardins, A. C. Carcy, J. L. Giorgetta, C. Menneglier, M. Scheel, and T. Weitkamp, “Design of Indirect X-Ray Detectors for Tomography on the Anatomix Beamline”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 355-357.
- C. Sun, S. James, K. Muriki, H. Nishimura, Y. Qin, and K. Song, “HPC Cloud Applied to Lattice Optimization”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP151, pp. 1767-1769.
Back to search