Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 111-113. doi:10.18429/JACoW-ECRIS2016-WEPP18
[n] J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
[n] A. S. Fisher, R. Holtzapple, A. Novokhatski, J. L. Turner, U. Wienands, and G. Yocky, “Bunch-Length Measurements in PEP-II”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP026, pp. 1934-1936.
[n] J. A. Balmer and L. A. Welbourne, “A Study of Thermally Induced Movement in SRS Storage Ring Quadrupole Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2561-2564.
[n] W. Thongpakdi and S. Rimjaem, “Development of Injector System for MIR/THz Free-Electron Laser Facility in Thailand”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2767-2769. doi:10.18429/JACoW-IPAC2017-WEPAB084
[n] K. Kosaentor and S. Rimjaem, “Study on Electron Beam Transverse Emittance at the Linac-based THz Laboratory in Thailand”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3017-3019. doi:10.18429/JACoW-IPAC2016-WEPOY018
[n] A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2503-2506.
[n] R. Cai et al., “LHC crystal collimation tests with 6.8 Z TeV Pb beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2503-2506. doi:10.18429/JACoW-IPAC2023-TUPM120
[n] J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
[n] F. Cianciosi et al., “The Girders System for the New ESRF Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 147-151. doi:10.18429/JACoW-MEDSI2016-TUCA06
[n] C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
[n] T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
[n] N. N. Alexeev et al., “Development of MHF Conception at ITEP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 74-78. doi:10.18429/JACoW-RUPAC2016-WEYMH01
[n] H. Lovelace III et al., “Injecting and Ramping Trapped Beam in Hadron Accelerator”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1304, unpublished.
[n] L. Hardy et al., “Operation and developments at the ESRF-EBS light source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1270-1273. doi:10.18429/JACoW-IPAC2024-TUPG25
[n] M. Kanazawa et al., “Present Status of the RI Beam Project in HIMAC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI090, pp. 2742-2744.
[n] A. Ropert, P. Elleaume, L. Farvacque, Y. Papaphilippou, and T. Perron, “Prospects for Long-term Lattice Upgrade at the ESRF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF033, pp. 2344-2346.
[n] C. S. Chen, K. T. Chen, and K. T. Pan, “The Control Performance of Elliptically Polarizing Undulator at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP37G, pp. 2231-2233.
[n] W. Anders, A. Heugel, H.-G. Hoberg, S. Klauke, G. Mielczarek, and T. Westphal, “Highly Stable IOT Based 1,3 GHz / 16KW RF Power Source for CW Operated SC Linacs”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO045, pp. 679-682.
[n] K. T. Hsu, G. J. Jan, C. H. Kwo, K. T. Pan, T. S. Ueng, and C. J. Wang, “Fundamental Architectures of the Digital Global Orbit Feedback System for SRRC Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP093L, pp. 1928-1930.
[n] A. Bosotti, C. Albrecht, K. Jensch, L. Lilje, and R. Paparella, “A Fully Automated Device For Checking XFEL Piezo-Tuner Installation”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO049, pp. 693-697.
[n] M. Formela et al., “Hydrodynamic simulations of an argon-filled tapered plasma lens for optical matching at the ILC E+ source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC77, unpublished.
[n] Ch. Leemann et al., “A Heavy Ion Facility for Radiation Therapy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 986-989.
[n] O. Waldmann and B. A. Ludewigt, “Development of a Permanent-Magnet Microwave Ion Source for a Sealed-Tube Neutron Generator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP271, pp. 1984-1986.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 111-113.
- J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
- A. S. Fisher, R. Holtzapple, A. Novokhatski, J. L. Turner, U. Wienands, and G. Yocky, “Bunch-Length Measurements in PEP-II”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP026, pp. 1934-1936.
- J. A. Balmer and L. A. Welbourne, “A Study of Thermally Induced Movement in SRS Storage Ring Quadrupole Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2561-2564.
- W. Thongpakdi and S. Rimjaem, “Development of Injector System for MIR/THz Free-Electron Laser Facility in Thailand”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2767-2769.
- K. Kosaentor and S. Rimjaem, “Study on Electron Beam Transverse Emittance at the Linac-based THz Laboratory in Thailand”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3017-3019.
- A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2503-2506.
- R. Cai et al., “LHC crystal collimation tests with 6.8 Z TeV Pb beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM120, pp. 2503-2506.
- J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
- F. Cianciosi et al., “The Girders System for the New ESRF Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 147-151.
- C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
- T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
- N. N. Alexeev et al., “Development of MHF Conception at ITEP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 74-78.
- H. Lovelace III et al., “Injecting and Ramping Trapped Beam in Hadron Accelerator”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1304, this conference.
- L. Hardy et al., “Operation and developments at the ESRF-EBS light source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG25, pp. 1270-1273.
- M. Kanazawa et al., “Present Status of the RI Beam Project in HIMAC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI090, pp. 2742-2744.
- A. Ropert, P. Elleaume, L. Farvacque, Y. Papaphilippou, and T. Perron, “Prospects for Long-term Lattice Upgrade at the ESRF”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF033, pp. 2344-2346.
- C. S. Chen, K. T. Chen, and K. T. Pan, “The Control Performance of Elliptically Polarizing Undulator at SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP37G, pp. 2231-2233.
- W. Anders, A. Heugel, H.-G. Hoberg, S. Klauke, G. Mielczarek, and T. Westphal, “Highly Stable IOT Based 1,3 GHz / 16KW RF Power Source for CW Operated SC Linacs”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO045, pp. 679-682.
- K. T. Hsu, G. J. Jan, C. H. Kwo, K. T. Pan, T. S. Ueng, and C. J. Wang, “Fundamental Architectures of the Digital Global Orbit Feedback System for SRRC Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP093L, pp. 1928-1930.
- A. Bosotti, C. Albrecht, K. Jensch, L. Lilje, and R. Paparella, “A Fully Automated Device For Checking XFEL Piezo-Tuner Installation”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO049, pp. 693-697.
- M. Formela et al., “Hydrodynamic simulations of an argon-filled tapered plasma lens for optical matching at the ILC E+ source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC77, unpublished.
- Ch. Leemann et al., “A Heavy Ion Facility for Radiation Therapy”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 986-989.
- O. Waldmann and B. A. Ludewigt, “Development of a Permanent-Magnet Microwave Ion Source for a Sealed-Tube Neutron Generator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP271, pp. 1984-1986.
Back to search