JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Waghmare and D. Rai, “Predicting LANSCE klystron health and performance”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB080, unpublished. 
[n]	K. Eppley, J. Feinstein, K. Ko, N. Kroll, T. Lee, and E. Nelson, “A High Power Cross-Field Amplifier at X-Band”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 719-722. 
[n]	J. A. Ferreira Somoza and P. Chiggiato, “CERN Vacuum System Activities during the Long Shutdown 1: The LHC's injector chain.”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2291-2293. doi:10.18429/JACoW-IPAC2014-WEPME018
[n]	J. Mondal, G. Ciovati, P. Kneisel, K. C. Mittal, and R. Myneni, “Characterization of Ingot Material for SRF Cavity Production”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU01, pp. 455-461. 
[n]	A. Waghmare, C. Richman, and W. Haynes, “Improvements to the LANSCE CCL klystron evaluation”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 783-786. doi:10.18429/JACoW-NAPAC2025-WEP052
[n]	J. Mondal, A. Roy, and K. C. Mittal, “Optimization of Wall Thickness of Superconducting 700 MHz Bulk Niobium and Niobium Coated OFHC Cavities by Thermal/Structural Analysis”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP18, pp. 278-281. 
[n]	M. Yoon, R. T. Kouzes, A. B. McDonald, W. H. Moore, and S. Oh, “A Measurement of the Beam Phase at the Princeton University AVF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1218-1221. 
[n]	S. C. Joshi et al., “Commissioning of Vertical Test Stand Facility for 2 K Testing of Superconducting Cavities at RRCAT”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP117, pp. 695-698. 
[n]	A. Schmidt, R. Bandelmann, H. Brueck, A. Matheisen, and J. Schaffran, “Studies on Transportation of Superconducting Resonators and Beam Position Monitors - Quadrupol Units for the XFEL Project”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO050, pp. 504-507. 
[n]	K. Escherich et al., “Electro Polishing at DESY, A Set Up for Multi-cell Resonator Treatment”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT015, pp. XX-XX. 
[n]	G. Neu et al., “ASDEX Upgrade Control Parameter Organisation and Configuration Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP527, pp. XX-XX. 
[n]	W. Treutterer et al., “Software Structure and Real-Time Signal Exchange for the ASDEX Upgrade Tokamak Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH111, pp. XX-XX. 
[n]	J. Yang, B. Qin, Y. Xiong, D. Li, K. Liu, T. Hu, L. Cao and T. Yu, “Hybrid Simulation In Virtual Prototyping Of Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 334-336. 
[n]	J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246. 
[n]	C. Steier, G. Portmann, D. Robin, J. Safranek, and A. Wolski, “Coupling Correction and Beam Dynamics at Ultralow Vertical Emittance in the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG018, pp. 3213-3215. 
[n]	A. Jain, A. R. Chindarkar, and K. C. Mittal, “Design and Operating Experience of Triode Electron Guns for Industrial Electron Accelerators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA011, pp. 348-350. 
[n]	A. R. Tillu, S. Chandan, K. P. Dixit, K. C. Mittal, and H. E. Sarukte, “Design, Development and Initial Results of Solid State Magnetron Modulator”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP004, pp. 843-846. 
[n]	S. Hunt, “Purchasing Accelerator Subsystems as Turnkey Components”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUCI001, pp. XX-XX. 
[n]	Y. C. Huang, A. C. Chiang, and Y. Y. Lin, “A High-Gain, Transform-Limited Far-Infrared Free-Electron Laser Amplifier Seeded by a THz Single-Frequency Difference Frequency Generator”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUA102, pp. XX-XX. 
[n]	R. Yotam et al., “Personnel Protection and Beam Containment Systems for the 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1028-1031. 
[n]	M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070. 
[n]	T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129. 
[n]	M. Boege, B. Keil, T. Schilcher, and V. Schlott, “Commissioning of the Fast Orbit Feedback at SLS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB041, pp. 3386-3388. 
[n]	M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX. 
[n]	M. Schalwat et al., “Exchange and Repair of Titanium Service Pipes for the EXFEL Series Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB025, pp. 1122-1126. 
[n]	F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305. 
[n]	G. Ciovati et al., “A Coaxial TE011 Cavity and a System to Measure DC and RF Properties of Superconductors”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP01, pp. XX-XX. 
[n]	U. Masood et al., “Novel Approach to Utilize Proton Beams from High Power Laser Accelerators for Therapy”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1905-1907. doi:10.18429/JACoW-IPAC2016-TUPOY003
[n]	S. S. Gilardoni et al., “The Proposed CERN Proton-Synchrotron Upgrade Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS018, pp. 2520-2522. 
[n]	G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345. 
[n]	Y. Y. Lin, Y. C. Huang, and A. C. Chiang, “A Proof-of-Principle Experiment for a Structure-Loaded CO2 Laser-Driven Electron Accelerator in Vacuum”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16062, pp. XX-XX. 
[n]	H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422. 
[n]	G. Raupp et al., “Experiment Management System for the ASDEX Upgrade Tokamak”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_013. 
[n]	B. vanderHorst, A. Matheisen, B. Petersen, S. Saegebarth, and P. Schilling, “Update on Cavity Preparation for High Gradient Superconducting Multicell Cavities at DESY”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP30, pp. XX-XX. 
[n]	N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326. 
[n]	J. Cary, G. Werner, I. Zilberter, J. Leddy, J. Sembower, and L. Adams, “Adjoint optimization of accelerator cavities”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS25, unpublished. 
[n]	T. Bahlo et al., “Phase and Energy Stabilization System at the S-Dalinac”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 638-641. doi:10.18429/JACoW-IBIC2016-WEPG10
[n]	A. Burns et al., “The BOSC Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 803-806. 
[n]	L. E. Juergensen et al., “A Low Energy Electron-Scrapersystem for the S-DALINAC Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 366-368. doi:10.18429/JACoW-IPAC2014-MOPRO115
[n]	R. Brinkmann and M. Boege, “Beam-based Alignment and Polarization Optimization in the HERA Electron Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 938-941. 
[n]	Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259. 
[n]	J. Valladares, A. Waghmare, J. Castellano, and J. Bradley III, “Transverse electric modes in a resonant cavity and the resultant kick to an 800 MeV proton beam”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB086, unpublished. 
[n]	P. Dijkstal, M. Arnold, C. Burandt, F. Hug, and N. Pietralla, “Automated Transverse Beam Emittance Measurement using a Slow Wire Scanner at the S-DALINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 817-819. doi:10.18429/JACoW-IPAC2015-MOPHA020
[n]	L. M. Young and D. R. Keffeler, “The RF Power System for the Chopper/Buncher System on the NBS-Los Alamos RTM”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2165-2168. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “Maintaining an Effective and Efficient Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment During Long-term CERN Large Hadron Collider Operations”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB01, pp. 254-256. 
[n]	K. Schoenberg, “The LANSCE Accelerator: A Powerful Tool for Science and Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZAC03, pp. 120-120. 
[n]	F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4219-4222. doi:10.18429/JACoW-IPAC2018-THPMF064
[n]	T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425. 
[n]	J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273. 
[n]	D. Soriano Guill?â, R. Seviour, and S. Hunt, “RF Cavity Design for a Low Cost 1 MeV Proton Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4355-4357. doi:10.18429/JACoW-IPAC2017-THPIK110
[n]	K. P. Dixit et al., “Design and Development of Pulsed Modulators for RF Electron Linacs”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP004, pp. 55-57. 
[n]	T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296. 
[n]	T. Bahlo, C. Burandt, F. Hug, and N. Pietralla, “Implementation of a High Level Phase Controller for the Superconducting Injector of the S-DALINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 814-816. doi:10.18429/JACoW-IPAC2015-MOPHA019
[n]	P. Roychowdhury, D. P. Chakravarthy, P. Jain, K. C. Mittal, and A. K. Ray, “Design and Development of Beam Transport Elements for the BARC-ECIL Linac”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA076, pp. 220-222. 
[n]	L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553. 
[n]	L. C. Teng, “Heavy Ion Accelerators for Inertial Fusion”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3110-3115. 
[n]	A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458. 
[n]	R. Chandra, S. R. Ghodke, A. S. Patel, A. Sharma, and S. K. Singh, “Design of Relativistic Magnetron for High Power Microwave Generation”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP006, pp. 452-455. 
[n]	A. Roy, J. Mondal, and K. C. Mittal, “Structural Analysis of Single Cell Superconducting Elliptical Cavity with Static Lorentz Force”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP17, pp. 275-277. 
[n]	H. P. Chang, C. C. Kuo, and J. Safranek, “Correction of Lattice Optics in the Presence of Strong Wiggler Magnet at SRRC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D004, pp. 674-676. 
[n]	F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469. 
[n]	M. T. Lynch, D. R. Keffeler, and L. N. Sorum, “RF Control System for a Rocket-Borne Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 775-778. 
[n]	K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725. 
[n]	A. Gokhale, B. P. Dubey, and A. S. Sharma, “Artificial Neural Network Calculates Backward Wave Oscillator Parameters Reliably For Pulsed Accelerators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA073, pp. 738-739. 
[n]	N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search