Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_046.
[n] C. Kwankasem and S. Chunjarean, “Storage Ring Beam Dynamics Modeling with Limited Instrumentation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP029, pp. 4369-4371.
[n] G. Benedetti, D. Einfeld, Z. Mart?¡, and M. Mu??oz, “Beam Optics Measurements During the Commissioning of the ALBA Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA056, pp. 2612-2614.
[n] H. Nishimura, J. L. McDonald, and C. Timossi, “Cross Platform SCA Component using C++ Builder and Kylix”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE028, pp. 2385-2386.
[n] K. Togawa, A. Higashiya, and T. Shintake, “Graphite Heater Optimized for a Low-emittance CeB6 Cathode”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN043, pp. 1013-1015.
[n] U. Ratzinger, “High Current IH Structures”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 264-267.
[n] L. David and E. L?®corch?®, “Software Trends for Both the GANIL SPIRAL Control”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-04, pp. 564-566.
[n] H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
[n] Z. Wang, Q. Gu, G. L. Wang, and M. H. Zhao, “Injector Physics Design at SHINE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1801-1803. doi:10.18429/JACoW-IPAC2019-TUPRB053
[n] F. Gougnaud et al., “The Implementation of the Spiral2 Injector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU025, pp. 491-493.
[n] K. Casarin et al., “Experience with Aluminium Vacuum Chambers at ELETTRA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B09, pp. 2292-2294.
[n] M. Znidarcic and M. Cargnelutti, “Compact Beam Position Monitor for Electron and Proton Machines”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 161-164. doi:10.18429/JACoW-LINAC2016-MOPLR012
[n] W. Lou, D. Hartill, D. Rice, D. Rubin, and J. Welch, “Permanent Magnet Quadrupoles for CESR Phase-III Upgrade”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P005, pp. 3236-3238.
[n] C. Potts, F. Brumwell, A. Rauchas, V. Stipp, and G. Volk, “Performance of the Intense Pulsed Neutron Source Accelerator System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2131-2134.
[n] F. Z. Hsiao et al., “Investigation of Moisture Contamination in the Cryogenic System at NSRRC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2762-2764. doi:10.18429/JACoW-IPAC2014-WEPRI111
[n] G. Ingold, “Insertion Devices: New Concepts and Performance”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUZF102, pp. 222-226.
[n] Y. Senichev, R. Maier, D. Zyuzin, and M. Berz, “Alternating Spin Aberration Electrostatic Lattice for EDM Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC070, pp. 1332-1334.
[n] K. H. Kim, S. H. Kim, H.-S. Lee, S. S. Park, and Y. J. Park, “Phase Tuning Results of the Waveguide Network System at Pal”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3597-3599. doi:10.18429/JACoW-IPAC2016-THPMW024
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 158-161.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_046.
- C. Kwankasem and S. Chunjarean, “Storage Ring Beam Dynamics Modeling with Limited Instrumentation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP029, pp. 4369-4371.
- G. Benedetti, D. Einfeld, Z. Mart?¡, and M. Mu??oz, “Beam Optics Measurements During the Commissioning of the ALBA Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA056, pp. 2612-2614.
- H. Nishimura, J. L. McDonald, and C. Timossi, “Cross Platform SCA Component using C++ Builder and Kylix”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE028, pp. 2385-2386.
- K. Togawa, A. Higashiya, and T. Shintake, “Graphite Heater Optimized for a Low-emittance CeB6 Cathode”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN043, pp. 1013-1015.
- U. Ratzinger, “High Current IH Structures”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 264-267.
- L. David and E. L?®corch?®, “Software Trends for Both the GANIL SPIRAL Control”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper H-04, pp. 564-566.
- H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
- Z. Wang, Q. Gu, G. L. Wang, and M. H. Zhao, “Injector Physics Design at SHINE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1801-1803.
- F. Gougnaud et al., “The Implementation of the Spiral2 Injector Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU025, pp. 491-493.
- K. Casarin et al., “Experience with Aluminium Vacuum Chambers at ELETTRA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B09, pp. 2292-2294.
- M. Znidarcic and M. Cargnelutti, “Compact Beam Position Monitor for Electron and Proton Machines”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 161-164.
- W. Lou, D. Hartill, D. Rice, D. Rubin, and J. Welch, “Permanent Magnet Quadrupoles for CESR Phase-III Upgrade”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P005, pp. 3236-3238.
- C. Potts, F. Brumwell, A. Rauchas, V. Stipp, and G. Volk, “Performance of the Intense Pulsed Neutron Source Accelerator System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2131-2134.
- F. Z. Hsiao et al., “Investigation of Moisture Contamination in the Cryogenic System at NSRRC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2762-2764.
- G. Ingold, “Insertion Devices: New Concepts and Performance”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUZF102, pp. 222-226.
- Y. Senichev, R. Maier, D. Zyuzin, and M. Berz, “Alternating Spin Aberration Electrostatic Lattice for EDM Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC070, pp. 1332-1334.
- K. H. Kim, S. H. Kim, H.-S. Lee, S. S. Park, and Y. J. Park, “Phase Tuning Results of the Waveguide Network System at Pal”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3597-3599.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 158-161.
Back to search