JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	P. M. Strubin and N. Fietier, “Using Distributed Intelligence to Control the Vacuum System of a Very Large Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 863-866. 
[n]	E. V. Bulyak, J. Urakawa, and F. Zimmermann, “Further Study on Fast Cooling in Compton Storage Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP004, pp. 571-573. 
[n]	R. T. Avery, D. Keefe, T. L. Brekke, and I. Finnie, “Shattering Rock with Intense Bursts of Energetic Electrons”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1010-1015. 
[n]	H. G. Kirk et al., “Beam-power Deposition in a 4-MW Target Station for a Muon Collider or a Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS054, pp. 1653-1655. 
[n]	P. Baudrenghien et al., “The LHC RF System - Experience with Beam Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC054, pp. 202-204. 
[n]	F. Marcellini and D. Alesini, “The RF Deflector for the CTF3 Delay Loop”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS020, pp. 2436-2438. 
[n]	A.-M. Valente, C. Benvenuti, S. Calatroni, P. Darriulat, M. A. Peck, and C. A. Van, “Study of the Residual Resistance of Superconducting Niobium Films at 1.5 GHz”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA004, pp. 550-554. 
[n]	S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9. 
[n]	D. Olsson et al., “Commissioning Status of the Chopper System for the MAX IV Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 316-319. doi:10.18429/JACoW-LINAC2016-MOP106015
[n]	K. Jin, “X-Band Travelling Wave Accelerating Section R&D for HTF”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 152-154. doi:10.18429/JACoW-LINAC2016-MOPLR009
[n]	E. I. Simakov, “X-Band Photonic Band Gap Accelerating Structures with Improved Wakefield Suppression”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 307-309. doi:10.18429/JACoW-LINAC2016-MOP106002
[n]	D. Alesini et al., “Beam-Beam Experience at DAɸNE”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH129, pp. 3540-3542. 
[n]	J. M. Byrd, W. C. Barry, G. D. Stover, and G. Huang, “Beam Transfer Function Diagnostics for Broadband Multibunch Feedback Systems”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI028, pp. 2064-2066. 
[n]	F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1356-1358. doi:10.18429/JACoW-IPAC2019-TUPMP047
[n]	M. Pieck, J. L. Erickson, M. S. Gulley, K. W. Jones, and L. Rybarcyk, “Systems Enginering Aspects to Installation of the Phased Multi-Year LANSCE-Refurbishment Project”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP051, pp. 203-205. 
[n]	B. Y. Chen et al., “TPS Beam Trip Analysis and Dose Distribution”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2302-2304. doi:10.18429/JACoW-IPAC2018-WEPAL055
[n]	C. Steier et al., “Status of the Top-off Upgrade of the ALS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS003, pp. 1197-1199. 
[n]	A. Fukasawa et al., “Charge and Wavelength Scaling of the UCLA/URLS/INFN Hybrid Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS052, pp. 3609-3611. 
[n]	E. V. Bulyak, P. Gladkikh, T. Omori, L. Rinolfi, and J. Urakawa, “Beam Dynamics in Compton Storage Rings with Laser Cooling”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD093, pp. 2123-2125. 
[n]	F. Loehl, “Status of SwissFEL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 22-26. doi:10.18429/JACoW-LINAC2016-MO3A01
[n]	A. Poncet, P. Cruikshank, V. Parma, P. M. Strubin, J.-P. G. Tock, and D. Tommasini, “Assembly and Quality Control of the LHC Cryostats at CERN. Motivations, Means, Results and Lessons Learned”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN079, pp. 338-340. 
[n]	T. Okugi, “Achievement of Small Beam Size at ATF2 Beamline”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 27-31. doi:10.18429/JACoW-LINAC2016-MO3A02
[n]	R. Venugopal et al., “Quality factor analysis of surface-passivated cavities at low gradients applying two level system models”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 345-348. doi:10.18429/JACoW-SRF2025-TUP16
[n]	M. E. Angoletta, M. Ludwig, N. Madsen, O. Marqversen, and F. Pedersen Geneva, “Real-Time Tune Measurements on the CERN Antiproton Decelerator”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS01, pp. XX-XX. 
[n]	R. H. A. Farias, L. Jahnel, L. Lin, and P. F. Tavares, “A 200 MeV Recirculation LINAC as an Injector for the LNLS UVX Electron Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 663-665. 
[n]	A. P. Letchford et al., “Status of the FETS Project”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP129, pp. 361-363. 
[n]	K. Beckert et al., “Performance of Schottky Mass Spectrometry at the ESR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEOA02A, pp. 256-258. 
[n]	C. H. Thoma and T. P. Hughes, “A Beam-Slice Algorithm for Transport Simulations of the DARHT-2 Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN083, pp. 3411-3413. 
[n]	A. A. Starostenko, A. E. Levichev, and D. A. Nikiforov, “Commissioning of BINP Injection Complex VEPP-5”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP120, pp. 702-704. 
[n]	R. T. Avery, G. R. Lamertson, and C. D. Pike, “Printed-Circuit Steering Coils”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 885-887. 
[n]	N. Madsen et al., “Lasers and Laser-Cooling Used for Studies of Beam Dynamics”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B010, pp. 1560-1562. 
[n]	M. Hoffmann Wallner et al., “Efficient RF components of solid-state amplifiers for Sirius storage ring's RF plant”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3586-3589. doi:10.18429/JACoW-IPAC2023-WEPM008
[n]	O. Grobner et al., “Controls for the CERN Intersecting Storage Rings”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 857-862. 
[n]	R. Enparantza et al., “Beam Stop Design and Construction for the Front End Test Stand at ISIS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE049, pp. 1080-1082. 
[n]	E. V. Bulyak, J. Urakawa, and F. Zimmermann, “Fast Cooling of Bunches in Compton Storage Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ011, pp. 2790-2792. 
[n]	F. M. Velotti et al., “Observations of SPS Slow-Extracted Spill Quality Degradation and Possible Improvements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 761-764. doi:10.18429/JACoW-IPAC2018-TUPAF035
[n]	J. M. Jimenez, G. Arduini, and K. Weiss, “The SPS as a Vacuum Test Bench for Electron Cloud Studies with LHC Type Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAB006, pp. 685-687. 
[n]	D. Manglunki et al., “The First LHC p-Pb run: Performance of the Heavy Ion Production Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA061, pp. 2648-2650. 
[n]	H. Jakob, L. Jensen, R. Jones, and J. J. Savioz Geneva, “A 40 MHz Bunch by Bunch Intensity Measurement for the CERN SPS and LHC”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT27, pp. XX-XX. 
[n]	N. P. Abreu, R. H. A. Farias, and P. F. Tavares, “RF Phase Modulation at the LNLS Electron Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP020, pp. 1686-1688. 
[n]	A. Jansson et al., “An Ionization Profile Monitor for the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT032, pp. 2227-2229. 
[n]	P. I. Gladkikh, M. A. Strelkov, and A. Yu. Zelinsky, “DECA - Code for Analysing and Design of Cyclic Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1688-1691. 
[n]	R. W. Klaffky, W. Broome, R. D, S. L. Kramer, M. G. Thomas, and J. M. Wang, “Longitudinal Coupled Bunch Instabilities on the NSLS X-Ray Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P051, pp. 2305-2307. 
[n]	P. Savage et al., “Production of the FETS RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA043, pp. 3726-3728. 
[n]	P. I. Gladkikh, I. M. Karnaukhov, S. G. Kononenko, A. A. Shcherbakov, M. A. Strelkov, and A. Yu. Zelinsky, “PSR-2000. An Injecting System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1463-1466. 
[n]	D. Doll et al., “Low to High Energy Beamstops for APT”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4090, pp. 615-617. 
[n]	P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348. 
[n]	H. Timko et al., “Advances on LHC RF Power Limitation Studies at Injection”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 567-570. doi:10.18429/JACoW-HB2023-THBP39
[n]	V. G. Kurakin et al., “Automation of the Lebedev Physical Institute Synchrotron to the Energy 1.3 GeV as the First Stage of the Accelerator Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH303, pp. 2778-2780. 
[n]	E. V. Bulyak, J. Urakawa, and F. Zimmermann, “Effect of Transverse Coupling on Asymmetric Cooling in Compton Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA050, pp. 1823-1825. 
[n]	J. A. O, M. J. Bodelson, J. L. Erickson, R. W. Garnett, and M. S. Gulley, “Proposed Facility Layout for MaRIE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP045, pp. 2202-2204. 
[n]	G. Bregliozzi, V. Baglin, S. Blanchard, J. Hansen, J. M. Jimenez, and K. Weiss, “Achievement and Evaluation of the Beam Vacuum Performance of the LHC Long Straight Sections”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP138, pp. 3685-3687. 
[n]	P. Bowe et al., “Limits to Bunched Beam Laser Cooling”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP21F, pp. 1043-1045. 
[n]	S. Ogur et al., “Towards a Preliminary FCC-ee Injector Design”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 90-93. doi:10.18429/JACoW-eeFACT2016-TUT2H5
[n]	G. Wu, L. Phillips, R. Sundelin, and A.-M. Valente, “Niobium Thin Film Properties Affected by Deposition Energy during Vacuum Depostion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB087, pp. 1401-1403. 
[n]	V. Ptitsyn et al., “MeRHIC ÔÇô Staging Approach to eRHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP062, pp. 2643-2645. 
[n]	J. J. Back, D. C. Faircloth, A. P. Letchford, C. Gabor, S. R. Lawrie, and J. K. Pozimski, “Performance of the Low Energy Beam Transport at the RAL Front End Test Stand”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3406-3408. doi:10.18429/JACoW-IPAC2014-THPME073
[n]	L. W. Put, J. D. A. Roeders, A. Van der Woude, H. L. Hagedoorn, and P. Kramer, “The 27 Al (p,)24 Mg Reaction Studied with a 30 MeV AVF Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-006, pp. XX-XX. 
[n]	F. Peauger et al., “Experimental demonstration of the slotted waveguide elliptical SWELL cavity for high intensity SRF accelerators”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 832-840. doi:10.18429/JACoW-SRF2025-FRB01
[n]	O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 685-688. 
[n]	A. Leggieri et al., “Radiation Measurements of a Medical Particle Accelerator Through a Passive Resonant Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 917-920. doi:10.18429/JACoW-IPAC2015-MOPHA053
[n]	G. D. Stover, “A Kicker Design for the Rapid Transfer of the Electron Beam between Radiator Beamlines in LUX”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF079, pp. 1786-1788. 
[n]	L. Ficcadenti et al., “RF measurements results of the final brazed SPARC RF Deflector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN030, pp. 3994-3996. 
[n]	S. A. Lewis et al., “Progress on a New Control System for the Bevalac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1645-1648. 
[n]	R. B. Britton, “Flux Pumps for Use at 60 Hz”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 681-683. 
[n]	R. T. Avery and G. A. Tidrick, “Corrugated-Bellows Vacuum Chamber for Fast-Cycling Synchrotrons”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 950-952. 
[n]	W. C. Barkley et al., “A Risk Based Approach to Improving Beam Availability at an Accelerator Facility”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 207-210. doi:10.18429/JACoW-LINAC2018-MOPO095
[n]	J.-W. Kim and C. C. Yun, “Design Study of an Accelerator Mass Spectrometer Based on a Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP043, pp. 1381-1383. 
[n]	N. Hiller et al., “Single-Shot Electro-Optical Diagnostics at the ANKA Storage Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD17, pp. 182-186. 
[n]	R. H. A. Farias et al., “The LNLS 500 MeV Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B18, pp. 705-707. 
[n]	I. Carvalho de Almeida, M. Hoffmann Wallner, and A. Pontes Barbosa Lima, “Third Harmonic Superconductive Cavity for Bunch Lengthening and Beam Lifetime Increase of Sirius Synchrotron Light Source”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 37. doi:10.18429/JACoW-SRF2021-SUPCAV011
[n]	P. Darriulat, “Superconducting Niobium Films for RF Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THX01B, pp. 179-183. 
[n]	D. Leitner, S. R. Abbott, R. D. Dwinell, M. A. Leitner, C. M. Lyneis, and C. Taylor, “Commissioning of the Superconducting ECR Ion Source VENUS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPB008, pp. 86-88. 
[n]	F. Marcellini, D. Alesini, S. Guiducci, and P. Raimondi, “Tests and Operational Experience with the DANE Stripline Injection Kicker”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP082, pp. 1739-1741. 
[n]	J. Y. Kim, J.-W. Kim, and M. Kim, “Beam Dump Design for the In-flight Fragment Separator using High-power Beam”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC03, pp. 1142-1144. 
[n]	R. T. Avery and G. A. Tidrick, “Elliptical Vacuum Chamber Stress and Deflections”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 952-954. 
[n]	J. Aggus, J. T. Keane, and P. Grand, “Linac Tank Installation and Tune-Up for 200 MeV Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper G-1, pp. 621-656. 
[n]	R. H. A. Farias, C. Pardine, and P. F. Tavares, “The RF System of the LNLS Injector Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH103, pp. 1011-1013. 
[n]	N. Madsen and J. S. Nielsen, “Laser-Cooling for Light Ion Accumulation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B13, pp. 1253-1255. 
[n]	A. Jansson et al., “IPM Measurements in the Tevatron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS008, pp. 3883-3885. 
[n]	P. Spaedtke and H. Reich, “Commissioning of the High Current Ion Sources at the New GSI Injector (HSI)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD14, pp. 238-240. 
[n]	V. I. Baranov et al., “Highly Efficient Deflection of the Divergent Beam by Bent Single Crystal”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG10, pp. 426-427. 
[n]	M. L. Lopes, R. P. Johnson, S. A. Kahn, V. S. Kashikhin, and A. V. Zlobin, “Studies of the High-Field Section for a Muon Helical Cooling Channel”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP060, pp. 268-270. 
[n]	R. Gavaggio, M. Steffensen, and P. M. Strubin, “Using Models to allow for Object Oriented Programming of the Vacuum Control Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1824-1827. 
[n]	L. Jensen, O. R. Jones, and H. Schmickler Geneva, “First results on closed-loop tune control in the CERN-SPS”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT05, pp. XX-XX. 
[n]	M. S. Gulley, “Tuning the Beam: a Physics Perspective on Beam Diagnostic Instrumentation”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper WETNB01, pp. 491-497. 
[n]	K. C. D. Chan et al., “Commissioning Plan for a High-Current Proton Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W017, pp. 1150-1152. 
[n]	Yu. Tur, “On Enhancement of Limited Accelerating Charge”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB17, pp. 990-991. 
[n]	V. Baglin, I. R. Collins, O. Gr?Âbner, C. Gr??nhagel, and B. Jenninger, “First Results from COLDEX applicable to the LHC Cryogenic Vacuum System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B03, pp. 2283-2285. 
[n]	M. Brouet, J. Hansen, H. Klette, and P. M. Strubin, “The AD Vacuum System: Construction and Commissioning”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THDR3, pp. 562-564. 
[n]	P. F. Tavares et al., “Commissioning of the LNLS Elliptically Polarizing Undulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN004, pp. 149-151. 
[n]	J. Y. Kim, D. G. Kim, E. H. Kim, J.-W. Kim, M. Kim, and C. C. Yun, “Pre-separator Design of the In-flight Fragment Separator Using High-power Beam”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC04, pp. 454-456. 
[n]	D. G. Kim, H.-C. Bhang, J.-W. Kim, J. Y. Kim, and C. C. Yun, “Study on the Injection System for Compact Cyclotron Mass Spectrometry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA019, pp. 106-108. 
[n]	B. Bogdanovich, V. Kudinov, A. Nesterovich, Yu. Pomasan, E. Tsygankov, and V. Janenko, “Bremsstrahlung from a New Type of Target: Increased Intensity and Average Energy, and Reduced Divergence”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W034, pp. 276-277. 
[n]	P. Darriulat et al., “Dependence of the Surface Resistance of Niobium Coated Copper Cavities on the Coating Temperature”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C20, pp. 467-471. 
[n]	N. Catalan Lasheras, G. Ferioli, and J. B. Jeanneret, “A Collimation Experiment with Protons at 120 GeV”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOO02A, pp. 242-244. 
[n]	V. Petit et al., “Beam-Induced Surface Modification of the LHC Beam Screens: The Reason for the High Heat Load in Some LHC Arcs?”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3479-3482. doi:10.18429/JACoW-IPAC2021-WEPAB339
[n]	G. Ferioli, L. Jensen, and G. Vismara, “Protection and Diagnostic Systems for High Intensity Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358-360. 
[n]	Z. K. Liu et al., “Input Output Controller of Digital Low Level RF System in NSRRC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4083-4085. doi:10.18429/JACoW-IPAC2017-THPAB150
[n]	A. Jansson et al., “Tevatron Ionization Profile Monitoring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THYFI01, pp. 2777-2780. 
[n]	T. Gahl et al., “The Modular Control Concept of the Neutron Scattering Experiments at the European Spallation Source ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 529-532. doi:10.18429/JACoW-ICALEPCS2015-TUB3O03
[n]	R. Gavaggio, M. Steffensen, and P. M. Strubin, “Upgrading of Vacuum Control Systems for Linac2, Linac4 and the PS Booster”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1821-1824. 
[n]	J. Aggus, D. Edwards, H. J. Halama, and J. Herrera, “Factors Determining the Choice of the Beam Tuber Material and the Vacuum Chamber Design for a Superconducting High Energy Storage Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4042-4045. 
[n]	R. T. Avery, T. L. Brekke, and I. Finnie, “Hard-Rock Tunneling Using PUlsed Electron Beams”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1798-1802. 
[n]	B. H. Choi et al., “High Power Proton Linac Program in Korea”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO301, pp. 26-28. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search