Favourites
For Word
[n] I. I. Gadjev, C. Emma, A. Nause, and J. B. Rosenzweig, “High-Gain FEL in the Space-Charge Dominated Raman Limit”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 347-350. doi:10.18429/JACoW-FEL2015-TUP008
[n] J. A. Uythoven et al., “Calibration Measurements of the LHC Beam Dumping System Extraction Kicker Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS015, pp. 1520-1522.
[n] B. Joly, P. Arnoux, D. Robinson, and K. B. Scheidt, “Review of Recent Upgrades & Modernizations on Diagnostics in the ESRF Storage Ring and Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD92, pp. 263-265.
[n] G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A model-driven approach for automatic PLC and SCADA code generation”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_007.
[n] R. M. Jones, G. Burt, N. Chanlek, P. Goudket, and B. Spencer, “Simulations of Stretched Wire Measurements of 3.9GHz Cavities for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS069, pp. 4177-4179.
[n] I.-C. Sheng and Y.-M. Hsiao, “Advanced power density mapping for FEA simulations of synchrotron accelerator high heat load components”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB054, unpublished.
[n] N. Juntong, Ch. Dhammatong, P. Sudmuang, and N. Suradet, “Six Months of Operation of the New RF Cavity System of SLRI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4331-4333. doi:10.18429/JACoW-IPAC2017-THPIK103
[n] D. Wang et al., “Vacuum System Design of the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3851-3854.
[n] N. Kanaya and K. Furukawa, “Reconfigurable Embedded Interface System for High Energy Accelerators”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP068, pp. 239-241.
[n] T. Tajima et al., “Recent Development of HOM Absorbers for KEKB Superconducting Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C34, pp. 709-724.
[n] J. Zhu et al., “Preliminary Study of Proton Beam Transport in a 10 MeV Dielectric Wall Accelerator”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB002, pp. 840-842.
[n] J. F. Bouteille, “High Quality Power Supply HQPS at the ESRF”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP042G, pp. 2334-2336.
[n] S. Roy Chaudhuri, H. Hayatnagarkar, and S. Natarajan, “Integrated Monitoring and Control Specification Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB06, pp. 47-50.
[n] N. J. Evans, S. E. Kopp, P. Adamson, and D. J. Scott, “A New Tool for Longitudinal Tomography in Fermilab's Main Injector and Recycler Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA061, pp. 816-818.
[n] S. Rastigeev et al., “Operation and Development of the BINP AMS Facility”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA05, pp. 134-136.
[n] B. Bogdanovich, V. Kudinov, A. Nesterovich, Yu. Pomasan, E. Tsygankov, and V. Janenko, “Bremsstrahlung from a New Type of Target: Increased Intensity and Average Energy, and Reduced Divergence”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W034, pp. 276-277.
[n] R. Gavaggio, M. Steffensen, and P. M. Strubin, “Upgrading of Vacuum Control Systems for Linac2, Linac4 and the PS Booster”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1821-1824.
For LaTeX
Use Complete Form
For BibTeX
References
- I. I. Gadjev, C. Emma, A. Nause, and J. B. Rosenzweig, “High-Gain FEL in the Space-Charge Dominated Raman Limit”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 347-350.
- J. A. Uythoven et al., “Calibration Measurements of the LHC Beam Dumping System Extraction Kicker Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS015, pp. 1520-1522.
- B. Joly, P. Arnoux, D. Robinson, and K. B. Scheidt, “Review of Recent Upgrades & Modernizations on Diagnostics in the ESRF Storage Ring and Injector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD92, pp. 263-265.
- G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A model-driven approach for automatic PLC and SCADA code generation”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O5_007.
- R. M. Jones, G. Burt, N. Chanlek, P. Goudket, and B. Spencer, “Simulations of Stretched Wire Measurements of 3.9GHz Cavities for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS069, pp. 4177-4179.
- I.-C. Sheng and Y.-M. Hsiao, “Advanced power density mapping for FEA simulations of synchrotron accelerator high heat load components”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB054, this conference.
- N. Juntong, Ch. Dhammatong, P. Sudmuang, and N. Suradet, “Six Months of Operation of the New RF Cavity System of SLRI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4331-4333.
- D. Wang et al., “Vacuum System Design of the MIT-Bates South Hall Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3851-3854.
- N. Kanaya and K. Furukawa, “Reconfigurable Embedded Interface System for High Energy Accelerators”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP068, pp. 239-241.
- T. Tajima et al., “Recent Development of HOM Absorbers for KEKB Superconducting Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C34, pp. 709-724.
- J. Zhu et al., “Preliminary Study of Proton Beam Transport in a 10 MeV Dielectric Wall Accelerator”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB002, pp. 840-842.
- J. F. Bouteille, “High Quality Power Supply HQPS at the ESRF”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP042G, pp. 2334-2336.
- S. Roy Chaudhuri, H. Hayatnagarkar, and S. Natarajan, “Integrated Monitoring and Control Specification Environment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOBAB06, pp. 47-50.
- N. J. Evans, S. E. Kopp, P. Adamson, and D. J. Scott, “A New Tool for Longitudinal Tomography in Fermilab's Main Injector and Recycler Rings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA061, pp. 816-818.
- S. Rastigeev et al., “Operation and Development of the BINP AMS Facility”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA05, pp. 134-136.
- B. Bogdanovich, V. Kudinov, A. Nesterovich, Yu. Pomasan, E. Tsygankov, and V. Janenko, “Bremsstrahlung from a New Type of Target: Increased Intensity and Average Energy, and Reduced Divergence”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W034, pp. 276-277.
- R. Gavaggio, M. Steffensen, and P. M. Strubin, “Upgrading of Vacuum Control Systems for Linac2, Linac4 and the PS Booster”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1821-1824.
Back to search