Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Kozanecki, Y. Cai, I. V. Narsky, J. Seeman, and M. K. Sullivan, “Experimental Study of Crossing-Angle and Parasitic-Crossing Effects at the PEP-II e+e- Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP024, pp. 1874-1876.
[n] A. Gamelin et al., “Double RF system design using normal conducting passive harmonic cavity for SOLEIL II”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5092, unpublished.
[n] E. Prebys, C. M. Ankenbrandt, A. I. Drozhdin, C. Johnstone, and N. V. Mokhov, “AC Dipole System for Inter-Bunch Beam Extinction in the Mu2e Beam Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP033, pp. 1611-1613.
[n] H.-Ch. Schroeder, A. Affeldt, H. P. Gausepohl, G. Kube, and G. Priebe, “Bunch Length Measurement for PETRA III Light Source Storage Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD30, pp. 113-115.
[n] J. Rossbach, E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Performance Limitations of an X-ray FEL”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP059G, pp. 733-735.
[n] J. Holma, M. J. Barnes, A. Chmielinska, and M. Pont, “Laboratory Measurements on Two ??12.5 kV Inductive Adders with ??0.02% Waveform Stability for CLIC Damping Ring Extraction Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3978-3981. doi:10.18429/JACoW-IPAC2019-THPRB073
[n] V. Kapin, M. Inoue, Y. Iwashita, and A. Noda, “Normal Mode Analysis of the Four Rod RFQ as a System of TEM Transmission Lines”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-78, pp. 254-256.
[n] A. Ciarma, H. Burkhardt, M. Boscolo, and P. Raimondi, “Alternative solenoid compensation scheme for the FCC-ee interaction region”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1160-1163. doi:10.18429/JACoW-IPAC2024-TUPC68
[n] W. Xu, J. Y. Li, K. Xuan, and H. Y. Zhang, “Orbit Stabilization for the HLS-II Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2661-2663. doi:10.18429/JACoW-IPAC2016-WEPOR002
[n] L. W. Lai, F. Z. Chen, Y. B. Leng, J. Wan, T. Wu, and Y. M. Zhou, “Status of Digital BPM Signal Processor for SHINE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3430-3433. doi:10.18429/JACoW-IPAC2021-WEPAB322
[n] W. Xu et al., “Novel HOM Damper Design for High Current SRF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 385-388. doi:10.18429/JACoW-SRF2017-TUPB002
[n] D. L. Kafkes and M. Schram, “Developing Robust Digital Twins and Reinforcement Learning for Accelerator Control Systems at the Fermilab Booster”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2268-2271. doi:10.18429/JACoW-IPAC2021-TUPAB327
[n] V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3982-3985. doi:10.18429/JACoW-IPAC2019-THPRB074
[n] T. Primidis, V. Soloviev, and C. P. Welsch, “FLUKA and Geant4 Monte Carlo Simulations of a Desktop, Flat Panel Source Array for 3D Medical Imaging”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2483-2486. doi:10.18429/JACoW-IPAC2021-TUPAB409
[n] A. R. Bainbridge, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Demonstration of ÔÇÿZEPTOÔÇÖ Permanent Magnet Technology on Diamond Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2370-2373. doi:10.18429/JACoW-IPAC2021-TUPAB365
[n] M. Fraser et al., “Upgrade of the PS booster-to-ISOLDE beam transfer line to facilitate an increase in proton driver energy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3552-3555. doi:10.18429/JACoW-IPAC2024-THPR28
[n] Y. R. Lu et al., “400-kW RF Amplifier for a 201.5-MHz Deuteron RFQ Accelerator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP041, pp. 670-672.
[n] C. Emma, K. Fang, C. Pellegrini, and J. Wu, “Tapering Studies for TW Level X-ray FELs with a Superconducting Undulator and Built-in Focusing”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 726-729. doi:10.18429/JACoW-FEL2015-WEP076
[n] A. Faltens and M. Giesch, “Fast Kicker Magnets for the 200-GeV Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 468-473.
[n] S.-Y. Chen et al., “Externally Controlled Injection of Electrons by a Laser Pulse in a Laser Wakefield Electron Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE064, pp. 3644-3646.
[n] M. Platz et al., “Latest Developments at the S-DALINAC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI111, pp. 2700-2702.
[n] T. Hellert et al., “Status of Osprey: A Framework for Agentic AI in Control Systems”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6322, unpublished.
[n] Y. X. Zhang et al., “Research on Secondary Electron Emission Characteristics of Diamond-like Carbon Thin Films”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1306-1308. doi:10.18429/JACoW-IPAC2019-TUPMP031
[n] J. J. Tan, Z. H. Bai, Z. L. Ren, J. H. Xu, and Q. Zhang, “Preliminary Study of Design Method for Hybrid MBA Lattice”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 297-299. doi:10.18429/JACoW-IPAC2021-MOPAB074
[n] J. W. Yan, H. X. Deng, B. Liu, and D. Wang, “Transverse Deflecting Structure Dynamics for Time-Resolved Machine Studies of Shine”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 632-634. doi:10.18429/JACoW-FEL2019-THP018
[n] V. Volkov et al., “Thermionic Cathode-Grid Assembly Simulations for RF Guns”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP087, pp. 572-574.
[n] A-M. Valente-Feliciano et al., “Development of Nb and Alternative Material Thin Films Tailored for SRF Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC116, pp. 349-351.
[n] D. J. Dunning et al., “Alternative Electron Beam Slicing Methods for CLARA and X-ray FELs”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 352-355. doi:10.18429/JACoW-FEL2017-TUP059
[n] K. Liu, Q. Gu, L. Li, Ch. Wang, and M. H. Zhao, “MODELING AND SIMULATION FOR MULTI-FEEDING CAVITY WITHOUT BEAM LOADING”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3921-3923. doi:10.18429/JACoW-IPAC2019-THPRB049
[n] J. Shaw et al., “A High Power Faraday Cup to Measure Extracted Beam Current from the Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P073, pp. 2274-2289.
[n] D. Proch, D. Einfeld, R. Onken, and N. Steinhauser, “Measurement of Multipacting Currents of Metal Surfaces in RF Fields”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ24, pp. 1776-1778.
[n] H. H. Lu, J. Dai, and J. J. Zhuang, “Research on the Undulator Used for PKU-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS32, pp. XX-XX.
[n] Y. T. Ding, J. E. Chen, S. L. Huang, Y. G. Wang, K. Zhao, and J. J. Zhuang, “Study on the Planar Undulator Scheme with Focusing Properties for PKU-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS33, pp. XX-XX.
[n] A. De Santis et al., “DAFNE run for the SIDDHARTA-2 experiment”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 756-759. doi:10.18429/JACoW-IPAC2023-MOPL085
[n] D. V. Senkov et al., “3-Channel Current Source with Channel Output Current up to 180 A and Output Voltage up to 180 V”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC031, pp. 509-511.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Kozanecki, Y. Cai, I. V. Narsky, J. Seeman, and M. K. Sullivan, “Experimental Study of Crossing-Angle and Parasitic-Crossing Effects at the PEP-II e+e- Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP024, pp. 1874-1876.
- A. Gamelin et al., “Double RF system design using normal conducting passive harmonic cavity for SOLEIL II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5092, this conference.
- E. Prebys, C. M. Ankenbrandt, A. I. Drozhdin, C. Johnstone, and N. V. Mokhov, “AC Dipole System for Inter-Bunch Beam Extinction in the Mu2e Beam Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP033, pp. 1611-1613.
- H.-Ch. Schroeder, A. Affeldt, H. P. Gausepohl, G. Kube, and G. Priebe, “Bunch Length Measurement for PETRA III Light Source Storage Ring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD30, pp. 113-115.
- J. Rossbach, E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Performance Limitations of an X-ray FEL”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP059G, pp. 733-735.
- J. Holma, M. J. Barnes, A. Chmielinska, and M. Pont, “Laboratory Measurements on Two ??12.5 kV Inductive Adders with ??0.02% Waveform Stability for CLIC Damping Ring Extraction Kickers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3978-3981.
- V. Kapin, M. Inoue, Y. Iwashita, and A. Noda, “Normal Mode Analysis of the Four Rod RFQ as a System of TEM Transmission Lines”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-78, pp. 254-256.
- A. Ciarma, H. Burkhardt, M. Boscolo, and P. Raimondi, “Alternative solenoid compensation scheme for the FCC-ee interaction region”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC68, pp. 1160-1163.
- W. Xu, J. Y. Li, K. Xuan, and H. Y. Zhang, “Orbit Stabilization for the HLS-II Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2661-2663.
- L. W. Lai, F. Z. Chen, Y. B. Leng, J. Wan, T. Wu, and Y. M. Zhou, “Status of Digital BPM Signal Processor for SHINE”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3430-3433.
- W. Xu et al., “Novel HOM Damper Design for High Current SRF Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 385-388.
- D. L. Kafkes and M. Schram, “Developing Robust Digital Twins and Reinforcement Learning for Accelerator Control Systems at the Fermilab Booster”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2268-2271.
- V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3982-3985.
- T. Primidis, V. Soloviev, and C. P. Welsch, “FLUKA and Geant4 Monte Carlo Simulations of a Desktop, Flat Panel Source Array for 3D Medical Imaging”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2483-2486.
- A. R. Bainbridge, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Demonstration of ÔÇÿZEPTOÔÇÖ Permanent Magnet Technology on Diamond Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2370-2373.
- M. Fraser et al., “Upgrade of the PS booster-to-ISOLDE beam transfer line to facilitate an increase in proton driver energy”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR28, pp. 3552-3555.
- Y. R. Lu et al., “400-kW RF Amplifier for a 201.5-MHz Deuteron RFQ Accelerator”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP041, pp. 670-672.
- C. Emma, K. Fang, C. Pellegrini, and J. Wu, “Tapering Studies for TW Level X-ray FELs with a Superconducting Undulator and Built-in Focusing”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 726-729.
- A. Faltens and M. Giesch, “Fast Kicker Magnets for the 200-GeV Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 468-473.
- S.-Y. Chen et al., “Externally Controlled Injection of Electrons by a Laser Pulse in a Laser Wakefield Electron Accelerator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE064, pp. 3644-3646.
- M. Platz et al., “Latest Developments at the S-DALINAC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI111, pp. 2700-2702.
- T. Hellert et al., “Status of Osprey: A Framework for Agentic AI in Control Systems”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6322, this conference.
- Y. X. Zhang et al., “Research on Secondary Electron Emission Characteristics of Diamond-like Carbon Thin Films”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1306-1308.
- J. J. Tan, Z. H. Bai, Z. L. Ren, J. H. Xu, and Q. Zhang, “Preliminary Study of Design Method for Hybrid MBA Lattice”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 297-299.
- J. W. Yan, H. X. Deng, B. Liu, and D. Wang, “Transverse Deflecting Structure Dynamics for Time-Resolved Machine Studies of Shine”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 632-634.
- V. Volkov et al., “Thermionic Cathode-Grid Assembly Simulations for RF Guns”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP087, pp. 572-574.
- A-M. Valente-Feliciano et al., “Development of Nb and Alternative Material Thin Films Tailored for SRF Applications”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC116, pp. 349-351.
- D. J. Dunning et al., “Alternative Electron Beam Slicing Methods for CLARA and X-ray FELs”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 352-355.
- K. Liu, Q. Gu, L. Li, Ch. Wang, and M. H. Zhao, “MODELING AND SIMULATION FOR MULTI-FEEDING CAVITY WITHOUT BEAM LOADING”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3921-3923.
- J. Shaw et al., “A High Power Faraday Cup to Measure Extracted Beam Current from the Bates South Hall Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P073, pp. 2274-2289.
- D. Proch, D. Einfeld, R. Onken, and N. Steinhauser, “Measurement of Multipacting Currents of Metal Surfaces in RF Fields”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ24, pp. 1776-1778.
- H. H. Lu, J. Dai, and J. J. Zhuang, “Research on the Undulator Used for PKU-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS32, pp. XX-XX.
- Y. T. Ding, J. E. Chen, S. L. Huang, Y. G. Wang, K. Zhao, and J. J. Zhuang, “Study on the Planar Undulator Scheme with Focusing Properties for PKU-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS33, pp. XX-XX.
- A. De Santis et al., “DAFNE run for the SIDDHARTA-2 experiment”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL085, pp. 756-759.
- D. V. Senkov et al., “3-Channel Current Source with Channel Output Current up to 180 A and Output Voltage up to 180 V”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC031, pp. 509-511.
Back to search