Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. E. Kim et al., “Status of PAL-XFEL Undulator Program”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2029-2031. doi:10.18429/JACoW-IPAC2014-WEPRO039
[n] D. Tronc, G. Meyrand, A. Setty, and D. T. Tran, “Electron Injector Designs for Light Source”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 487-490.
[n] V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
[n] S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 148-150. doi:10.18429/JACoW-PCAPAC2016-FRITPLCO04
[n] D. T. Tran, A. Cailleaux, and G. Berthevas, “Computer-Aided Design of RF Structures”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0032, pp. 414-416.
[n] S. Karabekyan, A. Beckmann, J. Pflueger, N. Burandt, J. Kuhn, and A. Schoeps, “The Undulator Control System for the European XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR002, pp. 3966-3968.
[n] P. Dijkstal et al., “Corrugated wakefield structures at SwissFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4828-4831. doi:10.18429/JACoW-IPAC2023-THPL153
[n] V. A. Kvardakov et al., “A Project of the 2.5 GeV Booster-Synchrotron in BINP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE007, pp. 1039-1041.
[n] M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 698-700. doi:10.18429/JACoW-IPAC2014-MOPRI043
[n] R. Zennaro, M. Bopp, A. Citterio, R. Reiser, and T. Stapf, “C-band RF Pulse Compressor for SwissFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI059, pp. 2827-2829.
[n] R. W. Thomae, “Status of New Electron Cyclotron Resonance Ion Sources at iThemba LABS”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-04, pp. 68-71.
[n] R. W. Thomae, J. L. Conradie, D. T. Fourie, and D. Kuchler, “Beam Experiments with the Grenoble Test Electron Cyclotron Resonance Ion Source at iThemba LABS”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP14, pp. 68-70.
[n] K. E. Nichols, B. E. Carlsten, and A. Malyzhenkov, “Klynac Design Simulations and Experimental Setup”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 68-70. doi:10.18429/JACoW-LINAC2016-MOOP12
[n] Y. Fuwa, N. Amemiya, Y. Ishi, Y. Kuriyama, and T. Uesugi, “Design of Multi-MW Rapid Cycling Synchrotron for Accelerator Driven Transmutation System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1057-1059. doi:10.18429/JACoW-IPAC2018-TUPAL027
[n] R. W. Thomae et al., “The FOM-MEQALAC System: The RF Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0012, pp. 118-120.
[n] K. N. Sjobak, H. Burkhardt, R. De Maria, A. Mereghetti, and A. Santamar?¡a Garc?¡a, “General Functionality for Turn-Dependent Element Properties in SixTrack”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 468-471. doi:10.18429/JACoW-IPAC2015-MOPJE069
[n] M. I. Besana, E. Hohmann, M. Sapinski, J. Snuverink, and D. Werthmüller, “Investigation of Long Radial Probe Activation in the PSI Main Ring Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEAO05, pp. 163-166. doi:10.18429/JACoW-CYCLOTRONS2022-WEAO05
[n] P. L. Lemut, R. Hrovatin, P. Orel, S. Zorzut, S. Hunziker, and V. Schlott, “Next Generation CW Reference Clock Transfer System with Femtosecond Stability”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA04, pp. 1358-1360.
[n] S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
[n] S. Karabekyan, A. Beckmann, J. Pflueger, and M. Yakopov, “A Proof-of-Principle Study of a Synchronous Movement of an Undulator Array Using an EtherCAT Fieldbus at European XFEL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC095, pp. 1292-1295.
[n] R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138.
[n] A. Santamar?¡a Garc?¡a et al., “Limits on Failure Scenarios for Crab Cavities in the HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3923-3926. doi:10.18429/JACoW-IPAC2015-THPF095
[n] C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Gas Scintillation Beam Profile Monitor at COSY J??lich”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM005, pp. 98-100.
[n] T. J. Zhang et al., “Beam Loss by Lorentz Stripping and Vacuum Dissociation in a 100 MeV Compact H- Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP111, pp. 5035-5037.
[n] A. Hedqvist et al., “XFEL Activities at MSL: Undulator Temperature Compensation and Quadrupole Fiducialization”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC12, pp. 675-678.
[n] A. Malyzhenkov and N. A. Yampolsky, “Optimization of Compton Source Performance Through Electron Beam Shaping”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 474-476. doi:10.18429/JACoW-NAPAC2016-TUB4CO03
[n] J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
[n] S. Aumon, S. S. Gilardoni, O. Hans, and F. C. Peters, “Study of Beam Losses at Injection in the CERN Proton Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP034, pp. 3775-3777.
[n] J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-01, pp. 376-379.
[n] K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
[n] D. T. Fourie et al., “Non-Destructive Beam Position Measurement in a Proton Therapy Beam Line”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD01, pp. 41-43.
[n] R. Apsimon, G. Burt, A. C. Dexter, R. B. Appleby, P. Baudrenghien, and K. N. Sjobak, “Modeling the Low Level RF Response on the Beam during Crab Cavity Quench”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1098-1101. doi:10.18429/JACoW-IPAC2017-MOPVA102
[n] M. Znidarcic, R. Hrovatin, and M. Satoh, “High Precision Electronics for Single Pass Applications”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO88, pp. 715-718.
[n] S. Tomin, W. Decking, N. Golubeva, A. I. Novokshonov, T. Wohlenberg, and I. Zagorodnov, “Longitudinal Phase Space Diagnostics with Corrugated Structure at the European XFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 275-278. doi:10.18429/JACoW-IPAC2022-MOPOPT020
[n] A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1485-1488. doi:10.18429/JACoW-IPAC2016-TUPMW025
[n] H. Euteneuer, A. Jankowiak, M. Negrazus, and V. I. Shvedunov, “The 4.9 GHz Accelerating Structure for MAMI-C”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B06, pp. 1954-1956.
[n] A. Noda, M. Inoue, Y. Iwashita, H. Okamoto, and T. Shirai, “Design Study of Compact Proton Synchrotron for Biomedical Use”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1663-1666.
[n] J. E. Griffin, J. A. MacLachlan, and A. Moretti, “Design of the rf Cavity and Power Ampifier for the Fermilab Antiproton Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3435-3438.
[n] Y. A. Fomin et al., “First Operation of New Electron Beam Orbit Measurement System at SIBERIA-2”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC051, pp. 1186-1188.
[n] A. H. Botha et al., “Operation and Development of the NAC Accelerator Facilities”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-01, pp. 80-83.
[n] M. Yakopov, S. Abeghyan, S. Karabekyan, and J. Pflueger, “Installation and the Hardware Commissioning of the European XFEL Undulator Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1344-1347. doi:10.18429/JACoW-ICALEPCS2017-THPHA003
[n] M. Yakopov, S. Abeghyan, S. Karabekyan, J. Pflueger, and Z. Zhao, “Automation of the Magnetic Field Measurements of the Air Coils by Means of the Moving Wire System”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 114-116. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO14
[n] D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
[n] J. M. Schippers et al., “A Novel Design of a Cyclotron Based Accelerator System for Multi-Ion Therapy”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-11, pp. 74-78.
[n] J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2785-2791.
[n] M. Cargnelutti, R. Hrovatin, and G. Jug, “Beam Position Electronics Based on System on Chip Platform”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC04, pp. 1145-1147.
[n] M. Pedrozzi et al., “The Laser Heater System of SwissFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP059, pp. 871-877.
[n] A. Winter et al., “Bunch Length Measurements at the SLS Linac using Electro-optical Techniques”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH01, pp. 253-255.
[n] J. L. Conradie et al., “The South African Isotope Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1240-1243. doi:10.18429/JACoW-IPAC2018-TUZGBF4
[n] B. Mikulec et al., “Linac4 Beam Characterisation before Injection into the CERN PS Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP055, pp. 4893-4895.
[n] Z. B. Du Toit et al., “Commissioning of the Injector Cyclotron for Polarised and Heavy Ions at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-04, pp. 28-31.
[n] H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
[n] J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 894-898.
[n] D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60.
[n] J. Pinel and D. T. Tran, “Development of the Floating Wire Method for the Control of Complex Optical Systems”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 757-762.
[n] P. Leban, R. Hrovatin, and T. Obina, “First-turn and Stored Beam Measurements with Single Bunch Filling Patterns Using Time-domain Processing at KEK-PF”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG008, pp. 38-40.
[n] J. E. Griffin, J. A. MacLachlan, and Z. B. Qian, “RF Exercises Associated with Acceleration of Intense Antiproton Bunches at Fermilab”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2627-2630.
[n] R. J. Burleigh, D. J. Clark, and L. R. Glasgow, “Heavy-Ion Booster Cyclotron Design Studies at Berkeley”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-06, pp. 604-608.
[n] M. Stadler et al., “Development of the SwissFEL Undulator BPM System”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD13, pp. 675-679.
[n] D. E. Kim et al., “Status Report of PAL-XFEL Undulator Program”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 769-771. doi:10.18429/JACoW-FEL2015-WED04
[n] C. Cardin et al., “Real-Time Java to Support the Device Property Model”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1757-1761. doi:10.18429/JACoW-ICALEPCS2017-THPHA153
[n] U. Ellenberger et al., “The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP056, pp. 859-863.
[n] J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
[n] F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2711-2717.
[n] V. G. Vaccaro et al., “Optimization Design of a Side Coupled Linac (SCL) for Protontherapy: a New Feeding Solution”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS048, pp. 1603-1605.
[n] V. G. Vaccaro et al., “Study of a Linac Booster for Proton Therapy in the 30-62 MeV Energy Range”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT070, pp. 1312-1314.
[n] J. A. MacLachlan, “Correcting Closed-Orbit Distortion in the NAL Main Ring”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 892-895.
[n] J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
[n] M. Negrazus and A. Peters, “SAW - A Superconducting Asymmetric Multipole Wiggler at the DELTA Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP139G, pp. 2576-2578.
[n] V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2342-2345.
[n] J. Xie, “Free Electron Laser Research in China”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG04, pp. 162-166.
[n] V. Musat, A. Latina, A. Malyzhenkov, and A. Aksoy, “A start-to-end optimisation of CLEAR for an inverse Compton scattering experiment, using RF-Track”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2162-2165. doi:10.18429/JACoW-IPAC2023-TUPL180
[n] J. L. Conradie et al., “Development of the NAC Accelerator Facilities”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-19, pp. 95-98.
[n] A. Latina, A. Malyzhenkov, A. Aksoy, and J. Olivares Herrador, “Update of the RF-Track particle tracking code”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3462-3465. doi:10.18429/JACoW-IPAC2023-WEPL151
[n] H. Tongu, A. Noda, T. Shirai, Y. Iwashita, A. Morita, and T. Sugimura, “The Present Status of the Vacuum System in KSR”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO025, pp. 2589-2591.
[n] H. G. Blosser et al., “Superconducting Cyclotron Facility for Neutron Therapy”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J30, pp. 431-435.
[n] A. V. Pavlenko, A. M. Batrakov, D. Shichkov, and P. V. Vagin, “Multimode Digital Integrators For Precise Magnetic Measurements”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD032, pp. 617-619.
[n] A. Malyzhenkov et al., “Experimental generation of the transversely uniform electron bunches at the CLEAR facility at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2009-2012. doi:10.18429/JACoW-IPAC2023-TUPL119
For LaTeX
Use Complete Form
For BibTeX
References
- D. E. Kim et al., “Status of PAL-XFEL Undulator Program”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2029-2031.
- D. Tronc, G. Meyrand, A. Setty, and D. T. Tran, “Electron Injector Designs for Light Source”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 487-490.
- V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
- S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 148-150.
- D. T. Tran, A. Cailleaux, and G. Berthevas, “Computer-Aided Design of RF Structures”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0032, pp. 414-416.
- S. Karabekyan, A. Beckmann, J. Pflueger, N. Burandt, J. Kuhn, and A. Schoeps, “The Undulator Control System for the European XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR002, pp. 3966-3968.
- P. Dijkstal et al., “Corrugated wakefield structures at SwissFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL153, pp. 4828-4831.
- V. A. Kvardakov et al., “A Project of the 2.5 GeV Booster-Synchrotron in BINP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE007, pp. 1039-1041.
- M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 698-700.
- R. Zennaro, M. Bopp, A. Citterio, R. Reiser, and T. Stapf, “C-band RF Pulse Compressor for SwissFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI059, pp. 2827-2829.
- R. W. Thomae, “Status of New Electron Cyclotron Resonance Ion Sources at iThemba LABS”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-04, pp. 68-71.
- R. W. Thomae, J. L. Conradie, D. T. Fourie, and D. Kuchler, “Beam Experiments with the Grenoble Test Electron Cyclotron Resonance Ion Source at iThemba LABS”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP14, pp. 68-70.
- K. E. Nichols, B. E. Carlsten, and A. Malyzhenkov, “Klynac Design Simulations and Experimental Setup”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 68-70.
- Y. Fuwa, N. Amemiya, Y. Ishi, Y. Kuriyama, and T. Uesugi, “Design of Multi-MW Rapid Cycling Synchrotron for Accelerator Driven Transmutation System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1057-1059.
- R. W. Thomae et al., “The FOM-MEQALAC System: The RF Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0012, pp. 118-120.
- K. N. Sjobak, H. Burkhardt, R. De Maria, A. Mereghetti, and A. Santamar?¡a Garc?¡a, “General Functionality for Turn-Dependent Element Properties in SixTrack”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 468-471.
- M. I. Besana, E. Hohmann, M. Sapinski, J. Snuverink, and D. Werthmüller, “Investigation of Long Radial Probe Activation in the PSI Main Ring Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEAO05, pp. 163-166.
- P. L. Lemut, R. Hrovatin, P. Orel, S. Zorzut, S. Hunziker, and V. Schlott, “Next Generation CW Reference Clock Transfer System with Femtosecond Stability”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA04, pp. 1358-1360.
- S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
- S. Karabekyan, A. Beckmann, J. Pflueger, and M. Yakopov, “A Proof-of-Principle Study of a Synchronous Movement of an Undulator Array Using an EtherCAT Fieldbus at European XFEL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC095, pp. 1292-1295.
- R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138.
- A. Santamar?¡a Garc?¡a et al., “Limits on Failure Scenarios for Crab Cavities in the HL-LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3923-3926.
- C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Gas Scintillation Beam Profile Monitor at COSY J??lich”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM005, pp. 98-100.
- T. J. Zhang et al., “Beam Loss by Lorentz Stripping and Vacuum Dissociation in a 100 MeV Compact H- Cyclotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP111, pp. 5035-5037.
- A. Hedqvist et al., “XFEL Activities at MSL: Undulator Temperature Compensation and Quadrupole Fiducialization”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPC12, pp. 675-678.
- A. Malyzhenkov and N. A. Yampolsky, “Optimization of Compton Source Performance Through Electron Beam Shaping”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 474-476.
- J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
- S. Aumon, S. S. Gilardoni, O. Hans, and F. C. Peters, “Study of Beam Losses at Injection in the CERN Proton Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP034, pp. 3775-3777.
- J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-01, pp. 376-379.
- K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
- D. T. Fourie et al., “Non-Destructive Beam Position Measurement in a Proton Therapy Beam Line”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD01, pp. 41-43.
- R. Apsimon, G. Burt, A. C. Dexter, R. B. Appleby, P. Baudrenghien, and K. N. Sjobak, “Modeling the Low Level RF Response on the Beam during Crab Cavity Quench”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1098-1101.
- M. Znidarcic, R. Hrovatin, and M. Satoh, “High Precision Electronics for Single Pass Applications”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO88, pp. 715-718.
- S. Tomin, W. Decking, N. Golubeva, A. I. Novokshonov, T. Wohlenberg, and I. Zagorodnov, “Longitudinal Phase Space Diagnostics with Corrugated Structure at the European XFEL”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 275-278.
- A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1485-1488.
- H. Euteneuer, A. Jankowiak, M. Negrazus, and V. I. Shvedunov, “The 4.9 GHz Accelerating Structure for MAMI-C”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5B06, pp. 1954-1956.
- A. Noda, M. Inoue, Y. Iwashita, H. Okamoto, and T. Shirai, “Design Study of Compact Proton Synchrotron for Biomedical Use”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1663-1666.
- J. E. Griffin, J. A. MacLachlan, and A. Moretti, “Design of the rf Cavity and Power Ampifier for the Fermilab Antiproton Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3435-3438.
- Y. A. Fomin et al., “First Operation of New Electron Beam Orbit Measurement System at SIBERIA-2”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC051, pp. 1186-1188.
- A. H. Botha et al., “Operation and Development of the NAC Accelerator Facilities”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-01, pp. 80-83.
- M. Yakopov, S. Abeghyan, S. Karabekyan, and J. Pflueger, “Installation and the Hardware Commissioning of the European XFEL Undulator Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1344-1347.
- M. Yakopov, S. Abeghyan, S. Karabekyan, J. Pflueger, and Z. Zhao, “Automation of the Magnetic Field Measurements of the Air Coils by Means of the Moving Wire System”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 114-116.
- D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
- J. M. Schippers et al., “A Novel Design of a Cyclotron Based Accelerator System for Multi-Ion Therapy”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-11, pp. 74-78.
- J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2785-2791.
- M. Cargnelutti, R. Hrovatin, and G. Jug, “Beam Position Electronics Based on System on Chip Platform”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC04, pp. 1145-1147.
- M. Pedrozzi et al., “The Laser Heater System of SwissFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP059, pp. 871-877.
- A. Winter et al., “Bunch Length Measurements at the SLS Linac using Electro-optical Techniques”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOALH01, pp. 253-255.
- J. L. Conradie et al., “The South African Isotope Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1240-1243.
- B. Mikulec et al., “Linac4 Beam Characterisation before Injection into the CERN PS Booster”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP055, pp. 4893-4895.
- Z. B. Du Toit et al., “Commissioning of the Injector Cyclotron for Polarised and Heavy Ions at NAC”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-04, pp. 28-31.
- H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
- J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 894-898.
- D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60.
- J. Pinel and D. T. Tran, “Development of the Floating Wire Method for the Control of Complex Optical Systems”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 757-762.
- P. Leban, R. Hrovatin, and T. Obina, “First-turn and Stored Beam Measurements with Single Bunch Filling Patterns Using Time-domain Processing at KEK-PF”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG008, pp. 38-40.
- J. E. Griffin, J. A. MacLachlan, and Z. B. Qian, “RF Exercises Associated with Acceleration of Intense Antiproton Bunches at Fermilab”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2627-2630.
- R. J. Burleigh, D. J. Clark, and L. R. Glasgow, “Heavy-Ion Booster Cyclotron Design Studies at Berkeley”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-06, pp. 604-608.
- M. Stadler et al., “Development of the SwissFEL Undulator BPM System”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD13, pp. 675-679.
- D. E. Kim et al., “Status Report of PAL-XFEL Undulator Program”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 769-771.
- C. Cardin et al., “Real-Time Java to Support the Device Property Model”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1757-1761.
- U. Ellenberger et al., “The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP056, pp. 859-863.
- J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
- F. Krienen and J. A. MacLachlan, “Antriproton Collection from a Production Target”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2711-2717.
- V. G. Vaccaro et al., “Optimization Design of a Side Coupled Linac (SCL) for Protontherapy: a New Feeding Solution”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS048, pp. 1603-1605.
- V. G. Vaccaro et al., “Study of a Linac Booster for Proton Therapy in the 30-62 MeV Energy Range”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT070, pp. 1312-1314.
- J. A. MacLachlan, “Correcting Closed-Orbit Distortion in the NAL Main Ring”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 892-895.
- J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
- M. Negrazus and A. Peters, “SAW - A Superconducting Asymmetric Multipole Wiggler at the DELTA Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP139G, pp. 2576-2578.
- V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2342-2345.
- J. Xie, “Free Electron Laser Research in China”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG04, pp. 162-166.
- V. Musat, A. Latina, A. Malyzhenkov, and A. Aksoy, “A start-to-end optimisation of CLEAR for an inverse Compton scattering experiment, using RF-Track”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL180, pp. 2162-2165.
- J. L. Conradie et al., “Development of the NAC Accelerator Facilities”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-19, pp. 95-98.
- A. Latina, A. Malyzhenkov, A. Aksoy, and J. Olivares Herrador, “Update of the RF-Track particle tracking code”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL151, pp. 3462-3465.
- H. Tongu, A. Noda, T. Shirai, Y. Iwashita, A. Morita, and T. Sugimura, “The Present Status of the Vacuum System in KSR”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO025, pp. 2589-2591.
- H. G. Blosser et al., “Superconducting Cyclotron Facility for Neutron Therapy”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J30, pp. 431-435.
- A. V. Pavlenko, A. M. Batrakov, D. Shichkov, and P. V. Vagin, “Multimode Digital Integrators For Precise Magnetic Measurements”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD032, pp. 617-619.
- A. Malyzhenkov et al., “Experimental generation of the transversely uniform electron bunches at the CLEAR facility at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL119, pp. 2009-2012.
Back to search