Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. A. Gough et al., “Design of an RFQ-Based, H- Injector for the BNL/FNAL 200 MeV Proton Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-8, pp. 260-262.
[n] T. Chen and S. Peggs, “The Driven Pendulum, and E778 Tune Modulation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1343-1346.
[n] Y. H. Wu and J. Ellsworth, “Summary of Beam Operation Capability at FXR LIA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3316-3319. doi:10.18429/JACoW-IPAC2018-THPAK045
[n] Yu. V. Bylinsky, S. V. Dvortsov, A. V. Feschenko, S. J. Jarylkapov, and P. N. Ostroumov, “Setting of RF Phase and Amplitude in Multi-Tank Ion Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-69, pp. 805-807.
[n] M. L. Gibbs, W. S. Colocho, A. Osman, J. Shtalenkova, and H. H. Slepicka, “A PyDM User Interface for an LCLS Simulator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1532. doi:10.18429/JACoW-ICALEPCS2019-WESH4002
[n] D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
[n] V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 689-692. doi:10.18429/JACoW-ICALEPCS2015-WEPGF001
[n] I. Barnett, G. Fernqvist, D. Hundzinger, J-C. Perreard, and J. G. Pett, “A Strategy for Controlling the LHC Magnet Currents”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP020G, pp. 2317-2319.
[n] B. Schmitz, J. Knobloch, O. Kugeler, J. M. K?â, and Y. Tamashevich, “Setup of a Spatially Resolving Vector Magnetometry System for the Investigation of Flux Trapping in Superconducting Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 975-977. doi:10.18429/JACoW-IPAC2017-MOPVA050
[n] N. Barov et al., “Measurements of Plasma Wake-Fields in the Blow-Out Regime”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG06, pp. 631-633.
[n] R. J. Macek, E. W. Hoffman, and O. B. van Dyck, “LAMPF Primary Beam Line Protection Systems”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4137-4140.
[n] M. Kinsho, Z. Kabeya, N. Ogiwara, and Y. Saito, “Alumina Ceramics Vacuum Duct for the 3GeV-RCS of the J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE039, pp. 2604-2606.
[n] M. E. Gruchalla and M. Thuot, “Managing Electromagnetic Interference in Large Instrumentation Environments”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUTUB1, pp. 224-238.
[n] J. G. Power et al., “High Power Testing of X-Band Dielectric-Loaded Accelerating Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA010, pp. 492-494.
[n] V. P. Suller, J. S. MacKay, M. W. Poole, and R. P. Walker, “Limitations on Single Bunch Operation in the SRS due to Beam Instabilities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 497-500.
[n] R. Soliday, “Proliferation of SDDS Support for Various Platforms and Languages”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP031, pp. XX-XX.
[n] M. Plotkin, “A Proposed AGS Accelerating Cavity”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 148-153.
[n] C. McGuinness, “Woodpile Structure Fabrication for Photonic Crystal Laser Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP090, pp. 3008-3008.
[n] O. A. Nezhevenko et al., “Performance of X-Band Pulsed Magnicon Amplifier”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE022, pp. 1128-1130.
[n] K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 560-563.
[n] M. Br?ñger, M. Brightwell, E. Koufakis, R. Martini, and A. Suwalska, “High-Availability Monitoring and Big Data: Using Java Clustering and Caching Technologies to Meet Complex Monitoring Scenarios”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC140, pp. 439-442.
[n] J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
[n] G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806.
[n] A. Taghibi Khotbeh-Sara, F. Rahmani, F. Ghasemi, H. Khalafi, and M. Mohseni Kejani, “Nuclear and Mechanical Basic Design of Target for Mo-99 Production Using High Power Electron Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 148-150. doi:10.18429/JACoW-LINAC2018-MOPO069
[n] M. Steck et al., “The Electron Cooling Device for the Heavy Ion Storage Ring TSR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1172-1175.
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
[n] F. Belloni, D. Doria, A. Lorusso, and V. Nassisi, “Ion Implantation Via Laser Ion Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH181, pp. 2355-2357.
[n] T. Kachel et al., “First Experiments with Femtosecond Soft X-Ray Pulses at BESSY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH063, pp. XX-XX.
[n] T. C. Shen et al., “The Evolution of the Simulation Environment in ALMA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 765-768. doi:10.18429/JACoW-ICALEPCS2015-WEPGF031
[n] H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
[n] R. Schuhmann, W. F. O. Müller, and T. Weiland, “Calculating Trapped Modes in TESLA Cavities with Time and Frequency Domain Methods”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB006, pp. 273-275.
[n] A. Y. Murokh et al., “Design and Fabrication of an X-band Traveling Wave Deflection Mode Cavity for Longitudinal Characterization of Ultra-short Electron Beam Pulses”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC072, pp. 1215-1217.
[n] A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 292-297. doi:10.18429/JACoW-ICALEPCS2017-TUDPL03
[n] A. V. Feschenko, A. A. Men, and P. N. Ostroumov, “A Detector to Measure Longitudinal and Transverse Distributions of a Two Component Ion Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1073-1076.
[n] G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
[n] N. Zhang, F. Z. Chen, and Y. M. Zhou, “Filling Pattern Measurement System Upgrade in SSRF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4791-4793. doi:10.18429/JACoW-IPAC2018-THPML066
[n] A. H. Lumpkin, W. J. Berg, M. Borland, and J. W. Lewellen, “Recent Characterizations of Electron Beams from the APS Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB004, pp. 2417-2419.
[n] Ch. Geyer and D. Kraemer, “Injection and Extraction of the BESSY II Booster and Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2349-2352.
[n] G. Lee, “Radiation Resistance of Elastomers”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3806-3809.
[n] Y.-C. Huang, F. H. Chao, C. H. Chen, H. H. Chen, and K. Y. Huang, “Tunable THz-pulse-train Photoinjector”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA01, pp. 187-189.
[n] F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1429-1432.
[n] N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Study of Adaptive Alignment as Beam Based Alignment in ILC Main Linac in the Presence of Ground Motion”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN108, pp. 2963-2965.
[n] M. Plotkin, “Folded Ferrite Loaded Cavities for Impedance Matching in the AGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 312-315.
[n] Y. P. Song, Y. Bao, Y. K. Chen, H. T. Jing, C. Meng, and J. Y. Tang, “Decay Muon Beamline Design for EMuS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3670-3672. doi:10.18429/JACoW-IPAC2019-THPGW040
[n] D. R. Swenson et al., “Development of a Volume H- Ion Source for LAMPF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC10, pp. 1016-1018.
[n] F. Ehm and A. Dworak, “A Remote Tracing Facility for Distributed Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMAU001, pp. 650-653.
[n] Yu. V. Bylinsky, A. V. Feschenko, A. V. Liiou, A. A. Men, and P. N. Ostroumov, “Bunch Length and Velocity Detector and its Application in the CERN Heavy Ion Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1702-1705.
[n] S. B. Leith, X. Jiang, R. Ries, E. Seiler, and M. Vogel, “Deposition Parameter Effects on Niobium Nitride (NbN) Thin Films Deposited Onto Copper Substrates with DC Magnetron Sputtering”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 945-949. doi:10.18429/JACoW-SRF2019-THP043
[n] W. F. Bergan et al., “Using High?¡ Precision Beam Position Monitors at the Cornell Electron Storage Ring (CESR) to Measure the One?¡ Way Speed of Light Anisotropy”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 399-401. doi:10.18429/JACoW-NAPAC2016-TUPOA57
[n] J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
[n] J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 618-621. doi:10.18429/JACoW-ICALEPCS2017-TUPHA088
[n] T. F. Wang and R. K. Cooper, “Electron Trajectories in a Combined Wiggler and Alternating Gradient Quadrupole Field”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2599-2602.
[n] S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
[n] W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1196-1199.
[n] T. Kroyer, P. Borowiec, F. Caspers, Z. Sulek, and L. R. Williams, “Operational Experience with the LHC Waveguide Mode Reflectometer”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS141, pp. 2709-2711.
[n] W. Leemans et al., “Status of the LBL Experiment on Femtosecond X-ray Generation through 90[degree] Thompson Scattering”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 828-831.
[n] M. Gusarova et al., “Low Betta Superconducting Cavity for the New Injector Linac for Nuclotron-NICA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1058-1060. doi:10.18429/JACoW-IPAC2017-MOPVA087
[n] R. E. Laxdal, “An Overview of Recent Developments in SRF Technology”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 6-12. doi:10.18429/JACoW-LINAC2018-MO1A02
[n] J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
[n] E. D. Courant, “Injection into the BNL AGS”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 9-02, pp. 301-310.
[n] G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
[n] Y. Hashimoto et al., “Two-Dimensional and Wide Dynamic Range Profile Monitor Using OTR / Fluorescence Screens for Diagnosing Beam Halo of Intense Proton Beams”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO2AB04, pp. 187-191.
[n] B. M. Dunham, L. S. Cardman, and C. K. Sinclair, “Emittance Measurements for the Illinois/CEBAF Polarized Electron Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC17, pp. 1030-1032.
[n] B. Bauvir, G. Chiozzi, and P. R. M. Duhoux, “Integration of ALMA Common Software and National Instruments LabVIEW”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP013, pp. 195-197.
[n] R. Valizadeh et al., “MULTIPACTOR SUPPRESSION BY LASER ABLATION SURFACE ENGINEERING FOR SPACE APPLICATIONS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1365-1368. doi:10.18429/JACoW-IPAC2019-TUPMP051
[n] T. C. Shen et al., “Exploring No-SQL Alternatives for ALMA Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOBA06, pp. 1012-1015.
[n] J. A. Avarias, G. Chiozzi, and H. Sommer, “Data Distribution Service as an Alternative to CORBA Notify Service of the ALMA Common Software”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA006, pp. 373-375.
[n] P. Buaphad et al., “X-ray Dose Rate of 6/4 MeV European S-band Linac Structure for Industrial Application at RTX”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3494-3496. doi:10.18429/JACoW-IPAC2019-THPMP021
[n] X. Xie, L. Liu, and T. Zhang, “Cyclotron Magnetic Field Computation Based on Data of an Asymmetric Reference Plane”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-08, pp. 309-311.
[n] S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
[n] M. Schenk et al., “Practical Stabilisation of Transverse Collective Instabilities with Second Order Chromaticity in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4477-4480. doi:10.18429/JACoW-IPAC2017-THPVA026
[n] V. Baldini et al., “A PLC-Based System for the Control of an Educational Observatory”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC054, pp. 691-694.
[n] A. Bungau, R. Cywinski, and J. S. Lord, “GEANT4 Simulations of the ISIS Muon Target at Rutherford Appleton Laboratory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP052, pp. 1400-1402.
[n] H. H. Slepicka and M. L. Gibbs, “PyDM - Status Update”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 537. doi:10.18429/JACoW-ICALEPCS2019-MOPHA134
[n] C. W. Owen, E. R. Gray, D. E. Johnson, G. M. Lee, S. Ohnuma, and R. A. Winje, “A 200-MHz Debuncher for the Fermilab Injector”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1904-1906.
[n] R. H. A. Farias, N. P. Abreu, L. C. Jahnel, L. Liu, C. Pardine, and P. F. Tavares, “Upgrade and Commissioning of the LNLS RF System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF001, pp. 950-952.
[n] J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC06, pp. 799-801.
[n] C. M. Yim, H.-S. Kang, C. Kim, I. S. Ko, and S. Noh, “Beam Parameter Measurements of fs-THz Linac at PAL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE039, pp. 1059-1061.
[n] Ch. Gerth et al., “Start-To-End Simulations of the Energy Recovery Linac Prototype FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS47, pp. XX-XX.
[n] Y. Cho et al., “Effects of Depolarizing Resonances on a Circulating Beam of Polarized Protons during Acceleration or Storage in a Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1509-1512.
[n] J. E. Lerch, J. A. Carter, P. K. Den Hartog, and G. E. Wiemerslage, “Design of the HGVPU Undulator Vacuum Chamber for LCLS-II”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 89-91. doi:10.18429/JACoW-NAPAC2016-MOPOB10
[n] S. Hatakeyama et al., “The Data Acquisition System of Beam Position Monitors in J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB007, pp. 2698-2700.
[n] A. V. Feschenko and P. N. Ostroumov, “Bunch Shape Measuring Technique and its Application for an Ion Linac Tuning”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-30, pp. 323-327.
[n] F. H. de S?â, H. O. C. Duarte, and L. Liu, “Update of the Collective Effects Studies for Sirius”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3680-3683. doi:10.18429/JACoW-IPAC2017-THPAB002
[n] M. Clinnick, J. Greer, J. Guggemos, R. Kilgore, and D. Rondeau, “Digital Controlled Frequency for Synchrotron Acceleration”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1261-1265.
[n] S. Kazakov, T. Higo, and S. Matsumoto, “T1011/TM11 Mixed-mode Waveguide Valve at X-band”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA014, pp. 3705-3707.
[n] R. H. A. Farias, L. C. Jahnel, and P. F. Tavares, “Optical Beam Diagnostics for the LNLS Synchrotron Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P060, pp. 2238-2240.
[n] R. DiGennaro et al., “The Design of a High Current, High Duty Factor RFQ for the SNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A07, pp. 495-497.
[n] C. E. T. Goncalves da Silva, A. R. Rodrigues, and D. Wisnivesky, “LNLS: The Brazilian Synchrotron Light Laboratory”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1248-1250.
[n] B. Autin et al., “Beam Optics Studies on the Antiproton Accumulator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2055-2058.
[n] R. Cirami et al., “An OPC-UA Based Architecture for the Control of the ESPRESSO Spectrograph @ VLT”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB07, pp. 70-73.
[n] T. Chen and D. Rubin, “Single Beam Crab Dynamics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1642-1645.
[n] J. Billan et al., “Performance of Series-design Prototype Main Quadrupoles for the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A15, pp. 2172-2174.
[n] A. R. D. Rodrigues et al., “Commissioning and Operations of the Brazilian Synchrotron Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V018, pp. 811-813.
[n] V. Conforti et al., “Procedures of Software Integration Test and Release for ASTRI SST-2m Prototype Proposed for the Cherenkov Telescope Array”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 370-374. doi:10.18429/JACoW-ICALEPCS2017-TUPHA004
[n] T. Bhatia, J. H. Billen, A. Cucchetti, F. W. Guy, G. Neuschaefer, and L. Young, “Beam Dynamics Design of an RFQ for the SSC Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1884-1887.
[n] C. Y. Wu et al., “Timing System of the Taiwan Photon Source”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS013, pp. 999-1002.
[n] R. A. Legg, M. V. Fisher, K. J. Kleman, T. L. Grimm, R. Jecks, and B. Kuhlman, “Development of a Frequency Map for the WiFEL SRF Gun”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO032, pp. 151-153.
[n] P. Xu, T. R. Bieler, and N. T. Wright, “Comparison of the Lattice Thermal Conductivity of Superconducting Tantalum and Niobium”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 148-153. doi:10.18429/JACoW-SRF2019-MOP041
[n] R. Flora, J. Saariviria, G. Tool, and D. Voy, “The Energy Saver/Doubler Quench Protection Monitor System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3289-3292.
[n] C. C. A. de Villiers, “MeerKAT Poster and Demo Control and Monitoring Highlights”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC023, pp. 594-595.
[n] K. Niki et al., “Design and Test of 2-4MHz Sawtooth-wave Pre-buncher for 26MHz-RFQ”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB011, pp. 3903-3905.
[n] E. Trakhtenberg, P. K. Den Hartog, and G. E. Wiemerslage, “Extruded Aluminum Vacuum Chambers for Insertion Devices”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOBS5, pp. 2093-2095.
[n] H. Chen, J. Gao, Q. X. Jin, R. K. Li, and Y. Z. Lin, “The Beam Characteristics of Intensity-modulated Radiotherapy 6MeV Standing Wave Accelerating Tube”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA016, pp. 97-99.
[n] M. M. Peng, W. Gai, J. Shi, Z. H. Wang, and H. Zha, “Development of an Half-Cell Accelerating Structure in Tsinghua”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4023-4025. doi:10.18429/JACoW-IPAC2018-THPAL158
[n] K. Woods, R. J. Clegg, R. Millward, F. Barnsely, and C. Jones, “Scalable High Demand Analytics Environments with Heterogeneous Clouds”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 170. doi:10.18429/JACoW-ICALEPCS2019-MOMPR007
[n] S. C. L. Srivastava, T. Basak, R. Pande, S. Roy, P. Singh, and V. L. SR. sista, “Study of Space Charge Compensation In LEBT”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA045, pp. 384-386.
[n] R. Cee, T. Haberer, A. Peters, S. Scheloske, and T. Winkelmann, “Intensity Upgrade Programme for the HIT Injector Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP113, pp. 1788-1790.
[n] A. F. Pietryla, A. E. Grelick, and W. E. Norum, “Development of a New Phase Detector for the APS Linac”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP031, pp. 468-470.
[n] A. V. Feschenko and P. N. Ostroumov, “Bunch Shape Analyser with Transverse Scanning of the Low Energy Secondary Electrons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 750-753.
[n] M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
[n] S. B. Leith, X. Jiang, Z. Khalil, A. S. H. Mohamed, and M. Vogel, “Initial Results from Investigations into Different Surface Peparation Techniques of OFHC Copper for SRF Applications”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 941-944. doi:10.18429/JACoW-SRF2019-THP042
[n] H. O. C. Duarte, P. P. S. Freitas, A. R. D. Rodrigues, R. M. Seraphim, and T. M. da Rocha, “Design Review of Bellows RF-Shielding Types and New Concepts for Sirius”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 53-56. doi:10.18429/JACoW-IPAC2019-MOPGW001
[n] J. Saisut, G. Asova, M. Krasilnikov, S. Rimjaem, F. Stephan, and C. Thongbai, “Low-charge Simulations for Phase Space Tomography Diagnostics at the PITZ Facility”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB10, pp. 414-417.
[n] A. P. Sumbaev et al., “LUE-200 Linac. Status & Development”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP096, pp. 653-655.
[n] C. Saisa-ard and S. Rimjaem, “Simulation and Design of Low Emittance RF Electron Gun”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 455-458. doi:10.18429/JACoW-FEL2015-TUP040
[n] R. Cirami, I. Coretti, P. Di Marcantonio, M. Pucillo, A. Santin, and P. Santin, “The EVALSO Project: Software/Hardware Architecture and Remote Tests Results”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP092, pp. 853-855.
[n] T. K. Kroc, T. B. Bolshakov, A. V. Burov, S. Seletsky, and A. V. Shemyakin, “Electron Beam Size Measurements in a Cooling Solenoid”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT069, pp. 3801-3803.
[n] T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
[n] N. R. Lobanov and D. C. Weisser, “Lead Plating: ANU SLRs Upgrade”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP003, pp. 129-142.
[n] D. Casavant et al., “Testing and Quality Assurance of the Control System during NIF Commissioning”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MO201, pp. XX-XX.
[n] M. Awschalom, G. M. Lee, M. L. Palmer, and D. E. Young, “The Fermilab Neutron Radiotherapy Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1055-1058.
[n] T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
[n] M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3283-3285. doi:10.18429/JACoW-IPAC2019-WEPTS069
[n] M. L. Petrosyan et al., “Experiments on Wake Field Acceleration in Plasma and the Program of the Further Works in YerPhI”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE001, pp. 752-754.
[n] B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
[n] W. Leemans, S. Chattopadhyay, M. Conde, R. Govil, M. de Loos, and B. van der Geer, “Plasma Production for the 50 MeV Plasma Lens Experiment at LBL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 831-834.
[n] S. F. Fukuta et al., “Database for Control System of J-PARC 3 GeV RCS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA26, pp. 567-569.
[n] J. G. Kohr, R. M. Rose, and B. P. Strauss, “Development of a New Practical High-Tc Superconducting Conductor Material”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 716-718.
[n] V. Kovarik et al., “Low-Level RF System for the AGS Light Ion Program”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1585-1588.
[n] T. Chen, J. Irwin, and R. Siemann, “Simulation of Beam-Beam Lifetime for LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1356-1359.
[n] J.-P. Koutchouk, “The LHC Dynamic Aperture”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECR1, pp. 372-376.
[n] J. Cerny III et al., “BEARS (Berkeley Experiments with Accelerated Radioactive Species)”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THDL7, pp. 533-535.
[n] U. Epting, “Computing and Network Infrastructure for Controls CNIC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O2_009.
[n] R. W. Fast and M. A. Otavka, “Liquid Deuterium Neutron Attenuator for Broad-Band Photon Beam Facility”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1201-1204.
[n] R. Schwemmer and N. Neufeld, “Implementing High Availability with COTS Components and Open-source Software”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WED005, pp. 624-626.
[n] G. M. Lee and C. D. Curtis, “High Gradient Accelerating Column Design and Construction”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 129-134.
[n] C. Viviani, G. M. A. Calvi, L. Lanzavecchia, M. Manzini, A. Parravicini, and E. Rojatti, “Beam Profile Monitors for the CNAO Experimental Line”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 328-331. doi:10.18429/JACoW-IBIC2019-TUPP016
[n] T. B. Bolshakov, A. D. Petrov, and S. L. Lackey, “Synoptic Display - A Client-Server System for Graphical Data Representation”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP505, pp. XX-XX.
[n] T. Tajima et al., “Test Results of ?ƒ=0.64, 700 MHz, 5-cell Elliptical Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PH002, pp. XX-XX.
[n] J. Yan, T. L. Allison, B. Bevins, A. Cuffe, and C. Seaton, “New EPICS/RTEMS IOC Based on Altera SOC at Jefferson Lab”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 304-306. doi:10.18429/JACoW-ICALEPCS2017-TUMPL03
[n] P. Wang et al., “Experimental Study on PM-AM Method in Pulse Compression System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4230-4232. doi:10.18429/JACoW-IPAC2017-THPIK059
[n] G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
[n] J.-P. Carneiro, B. M. Hanna, L. R. Prost, V. E. Scarpine, and A. V. Shemyakin, “Beam Measurements at the PIP-II Injector Test LEBT”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 636-638. doi:10.18429/JACoW-NAPAC2016-TUPOB64
[n] R. T. P. D, B. M. Hanna, L. R. Prost, V. E. Scarpine, A. V. Shemyakin, and J. Steimel, “Distinct Transverse Emittance Measurements of the PXIE LEBT”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD01, pp. 393-397.
[n] R. T. Sanders et al., “The AGS Booster Low Frequency RF System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 739-742.
[n] S. K. Esin et al., “Beam Loss Study at High Intensity Proton Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 754-757.
[n] R. Cirami et al., “FORS-Up: An Upgrade of the FORS2 Instrument @ ESO VLT”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 252. doi:10.18429/JACoW-ICALEPCS2019-MOPHA029
[n] I. Prieto Barreiro and M. Sobieszek, “Big Data Archiving From Oracle to Hadoop”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 498. doi:10.18429/JACoW-ICALEPCS2019-MOPHA117
[n] J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
[n] C. Roderick, L. Burdzanowski, D. Martin Anido, S. Pade, and P. Wilk, “Accelerator Fault Tracking at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 397-400. doi:10.18429/JACoW-ICALEPCS2017-TUPHA013
[n] A. Patoux, J. Perot, and J. M. Rifflet, “Test of New Accelerator Superconducting Dipoles Suitable for High Precision Field”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3681-3684.
[n] M. Vogel, X. Jiang, and C. Schlemper, “Carbon-based Coatings for Electron Cloud Mitigation in SRF Photocathodes”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 910-913. doi:10.18429/JACoW-SRF2017-THPB076
[n] K. A. Young et al., “5 MW 805 MHz SNS RF System Experience”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT054, pp. 3280-3282.
[n] C. D. Curtis, J. A. Fasolo, and G. M. Lee, “Initial Tests of the MURA High Gradient Column”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-03, pp. 365-370.
[n] E. Harms, B. Hendricks, G. Lee, and T. Williams, “Instrumentation for the Tevatron Beam Dump”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2771-2774.
[n] C. Gaspar, “An Overview of the LHC Experiments' Control Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOAAB01, pp. 982-986.
[n] M. de Jong, “Overview of New Light Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA002, pp. 220-223.
[n] W. T. Ford, W. Kozanecki, T. Lohse, and R. V. Servranckx, “Interactive Beam Tuning Simulator for the SLC Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1684-1687.
[n] G. Tortone et al., “Web Based Visualization Tools for Epics Embedded Systems: An Application to Belle2”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1857-1860. doi:10.18429/JACoW-ICALEPCS2017-THPHA181
[n] J. Miertusova, “Vacuum Performance Characteristic of a 5m-long Pump Free Insertion Device Vacuum Chamber for ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP19C, pp. 2190-2192.
[n] M. Plotkin, “Isabelle Cavity Gap Assemblies”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2752-2755.
[n] D. Gurd et al., “Recent Developments in the TRIUMF Control System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 631-634.
[n] L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
[n] L. G. Cardoso, C. Gaspar, and R. Jacobsson, “Automated Voltage Control in LHCb”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN028, pp. 304-307.
[n] R. B. Meinke, M. J. Ball, and C. L. Goodzeit, “Cost-Effective High-Field Magnets for Future Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH090, pp. 3442-3444.
[n] A. E. Grelick, A. R. Cours, N. P. Di Monte, A. Nassiri, T. Smith, and G. J. Waldschmidt, “The Advanced Photon Source Pulsed Deflecting Cavity RF System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN085, pp. 2224-2226.
[n] G. R. White, Y. Cai, R. O. Hettel, M. A. G. Johansson, V. Yakimenko, and G. Yocky, “A Compact 335 MeV Positron Damping Ring Design for FACET-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3652-3655. doi:10.18429/JACoW-IPAC2017-THOBA3
[n] R. Martini, K. Sigerud, N. Stapley, A. S. Suwalska, and P. Sollander, “Alarms Configuration Management”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB03, pp. 606-608.
[n] A. V. Pavlenko, A. M. Batrakov, G. V. Karpov, I. B. Nikolaev, and V. V. Svishchev, “Method of Broadband Stabilization of the VEPP-4M Main Field”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA29, pp. 100-102.
[n] D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, and A. Y. Orlov, “A Counting Module for an Advanced Ionization Profile Monitor”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC060, pp. 1194-1196.
[n] P. Xu, N. T. Wright, and T. R. Bieler, “Effect Of Dislocations On the Thermal Conductivity Of Superconducting Nb”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 886-890. doi:10.18429/JACoW-SRF2017-THPB061
[n] G. M. Kazakevich, Y. U. Jeong, G. I. Kuznetsov, B. C. Lee, S. H. Park, and V. M. Pavlov, “Optimization of the Injection System for Microtron-Based Terahertz FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH036, pp. 403-406.
For LaTeX
Use Complete Form
For BibTeX
References
- R. A. Gough et al., “Design of an RFQ-Based, H- Injector for the BNL/FNAL 200 MeV Proton Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-8, pp. 260-262.
- T. Chen and S. Peggs, “The Driven Pendulum, and E778 Tune Modulation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1343-1346.
- Y. H. Wu and J. Ellsworth, “Summary of Beam Operation Capability at FXR LIA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3316-3319.
- Yu. V. Bylinsky, S. V. Dvortsov, A. V. Feschenko, S. J. Jarylkapov, and P. N. Ostroumov, “Setting of RF Phase and Amplitude in Multi-Tank Ion Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-69, pp. 805-807.
- M. L. Gibbs, W. S. Colocho, A. Osman, J. Shtalenkova, and H. H. Slepicka, “A PyDM User Interface for an LCLS Simulator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1532.
- D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 141-145.
- V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 689-692.
- I. Barnett, G. Fernqvist, D. Hundzinger, J-C. Perreard, and J. G. Pett, “A Strategy for Controlling the LHC Magnet Currents”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP020G, pp. 2317-2319.
- B. Schmitz, J. Knobloch, O. Kugeler, J. M. K?â, and Y. Tamashevich, “Setup of a Spatially Resolving Vector Magnetometry System for the Investigation of Flux Trapping in Superconducting Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 975-977.
- N. Barov et al., “Measurements of Plasma Wake-Fields in the Blow-Out Regime”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG06, pp. 631-633.
- R. J. Macek, E. W. Hoffman, and O. B. van Dyck, “LAMPF Primary Beam Line Protection Systems”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4137-4140.
- M. Kinsho, Z. Kabeya, N. Ogiwara, and Y. Saito, “Alumina Ceramics Vacuum Duct for the 3GeV-RCS of the J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE039, pp. 2604-2606.
- M. E. Gruchalla and M. Thuot, “Managing Electromagnetic Interference in Large Instrumentation Environments”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUTUB1, pp. 224-238.
- J. G. Power et al., “High Power Testing of X-Band Dielectric-Loaded Accelerating Structures”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA010, pp. 492-494.
- V. P. Suller, J. S. MacKay, M. W. Poole, and R. P. Walker, “Limitations on Single Bunch Operation in the SRS due to Beam Instabilities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 497-500.
- R. Soliday, “Proliferation of SDDS Support for Various Platforms and Languages”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP031, pp. XX-XX.
- M. Plotkin, “A Proposed AGS Accelerating Cavity”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 148-153.
- C. McGuinness, “Woodpile Structure Fabrication for Photonic Crystal Laser Acceleration”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP090, pp. 3008-3008.
- O. A. Nezhevenko et al., “Performance of X-Band Pulsed Magnicon Amplifier”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE022, pp. 1128-1130.
- K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 560-563.
- M. Br?ñger, M. Brightwell, E. Koufakis, R. Martini, and A. Suwalska, “High-Availability Monitoring and Big Data: Using Java Clustering and Caching Technologies to Meet Complex Monitoring Scenarios”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC140, pp. 439-442.
- J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
- G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 803-806.
- A. Taghibi Khotbeh-Sara, F. Rahmani, F. Ghasemi, H. Khalafi, and M. Mohseni Kejani, “Nuclear and Mechanical Basic Design of Target for Mo-99 Production Using High Power Electron Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 148-150.
- M. Steck et al., “The Electron Cooling Device for the Heavy Ion Storage Ring TSR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1172-1175.
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
- F. Belloni, D. Doria, A. Lorusso, and V. Nassisi, “Ion Implantation Via Laser Ion Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH181, pp. 2355-2357.
- T. Kachel et al., “First Experiments with Femtosecond Soft X-Ray Pulses at BESSY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH063, pp. XX-XX.
- T. C. Shen et al., “The Evolution of the Simulation Environment in ALMA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 765-768.
- H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
- R. Schuhmann, W. F. O. Müller, and T. Weiland, “Calculating Trapped Modes in TESLA Cavities with Time and Frequency Domain Methods”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB006, pp. 273-275.
- A. Y. Murokh et al., “Design and Fabrication of an X-band Traveling Wave Deflection Mode Cavity for Longitudinal Characterization of Ultra-short Electron Beam Pulses”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC072, pp. 1215-1217.
- A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 292-297.
- A. V. Feschenko, A. A. Men, and P. N. Ostroumov, “A Detector to Measure Longitudinal and Transverse Distributions of a Two Component Ion Beam”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1073-1076.
- G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
- N. Zhang, F. Z. Chen, and Y. M. Zhou, “Filling Pattern Measurement System Upgrade in SSRF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4791-4793.
- A. H. Lumpkin, W. J. Berg, M. Borland, and J. W. Lewellen, “Recent Characterizations of Electron Beams from the APS Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB004, pp. 2417-2419.
- Ch. Geyer and D. Kraemer, “Injection and Extraction of the BESSY II Booster and Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2349-2352.
- G. Lee, “Radiation Resistance of Elastomers”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3806-3809.
- Y.-C. Huang, F. H. Chao, C. H. Chen, H. H. Chen, and K. Y. Huang, “Tunable THz-pulse-train Photoinjector”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPA01, pp. 187-189.
- F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1429-1432.
- N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Study of Adaptive Alignment as Beam Based Alignment in ILC Main Linac in the Presence of Ground Motion”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN108, pp. 2963-2965.
- M. Plotkin, “Folded Ferrite Loaded Cavities for Impedance Matching in the AGS”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 312-315.
- Y. P. Song, Y. Bao, Y. K. Chen, H. T. Jing, C. Meng, and J. Y. Tang, “Decay Muon Beamline Design for EMuS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3670-3672.
- D. R. Swenson et al., “Development of a Volume H- Ion Source for LAMPF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC10, pp. 1016-1018.
- F. Ehm and A. Dworak, “A Remote Tracing Facility for Distributed Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMAU001, pp. 650-653.
- Yu. V. Bylinsky, A. V. Feschenko, A. V. Liiou, A. A. Men, and P. N. Ostroumov, “Bunch Length and Velocity Detector and its Application in the CERN Heavy Ion Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1702-1705.
- S. B. Leith, X. Jiang, R. Ries, E. Seiler, and M. Vogel, “Deposition Parameter Effects on Niobium Nitride (NbN) Thin Films Deposited Onto Copper Substrates with DC Magnetron Sputtering”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 945-949.
- W. F. Bergan et al., “Using High?¡ Precision Beam Position Monitors at the Cornell Electron Storage Ring (CESR) to Measure the One?¡ Way Speed of Light Anisotropy”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 399-401.
- J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
- J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 618-621.
- T. F. Wang and R. K. Cooper, “Electron Trajectories in a Combined Wiggler and Alternating Gradient Quadrupole Field”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2599-2602.
- S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
- W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1196-1199.
- T. Kroyer, P. Borowiec, F. Caspers, Z. Sulek, and L. R. Williams, “Operational Experience with the LHC Waveguide Mode Reflectometer”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS141, pp. 2709-2711.
- W. Leemans et al., “Status of the LBL Experiment on Femtosecond X-ray Generation through 90[degree] Thompson Scattering”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 828-831.
- M. Gusarova et al., “Low Betta Superconducting Cavity for the New Injector Linac for Nuclotron-NICA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1058-1060.
- R. E. Laxdal, “An Overview of Recent Developments in SRF Technology”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 6-12.
- J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
- E. D. Courant, “Injection into the BNL AGS”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 9-02, pp. 301-310.
- G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
- Y. Hashimoto et al., “Two-Dimensional and Wide Dynamic Range Profile Monitor Using OTR / Fluorescence Screens for Diagnosing Beam Halo of Intense Proton Beams”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO2AB04, pp. 187-191.
- B. M. Dunham, L. S. Cardman, and C. K. Sinclair, “Emittance Measurements for the Illinois/CEBAF Polarized Electron Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC17, pp. 1030-1032.
- B. Bauvir, G. Chiozzi, and P. R. M. Duhoux, “Integration of ALMA Common Software and National Instruments LabVIEW”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP013, pp. 195-197.
- R. Valizadeh et al., “MULTIPACTOR SUPPRESSION BY LASER ABLATION SURFACE ENGINEERING FOR SPACE APPLICATIONS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1365-1368.
- T. C. Shen et al., “Exploring No-SQL Alternatives for ALMA Monitoring System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOBA06, pp. 1012-1015.
- J. A. Avarias, G. Chiozzi, and H. Sommer, “Data Distribution Service as an Alternative to CORBA Notify Service of the ALMA Common Software”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA006, pp. 373-375.
- P. Buaphad et al., “X-ray Dose Rate of 6/4 MeV European S-band Linac Structure for Industrial Application at RTX”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3494-3496.
- X. Xie, L. Liu, and T. Zhang, “Cyclotron Magnetic Field Computation Based on Data of an Asymmetric Reference Plane”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-08, pp. 309-311.
- S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
- M. Schenk et al., “Practical Stabilisation of Transverse Collective Instabilities with Second Order Chromaticity in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4477-4480.
- V. Baldini et al., “A PLC-Based System for the Control of an Educational Observatory”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC054, pp. 691-694.
- A. Bungau, R. Cywinski, and J. S. Lord, “GEANT4 Simulations of the ISIS Muon Target at Rutherford Appleton Laboratory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP052, pp. 1400-1402.
- H. H. Slepicka and M. L. Gibbs, “PyDM - Status Update”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 537.
- C. W. Owen, E. R. Gray, D. E. Johnson, G. M. Lee, S. Ohnuma, and R. A. Winje, “A 200-MHz Debuncher for the Fermilab Injector”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1904-1906.
- R. H. A. Farias, N. P. Abreu, L. C. Jahnel, L. Liu, C. Pardine, and P. F. Tavares, “Upgrade and Commissioning of the LNLS RF System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF001, pp. 950-952.
- J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC06, pp. 799-801.
- C. M. Yim, H.-S. Kang, C. Kim, I. S. Ko, and S. Noh, “Beam Parameter Measurements of fs-THz Linac at PAL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE039, pp. 1059-1061.
- Ch. Gerth et al., “Start-To-End Simulations of the Energy Recovery Linac Prototype FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS47, pp. XX-XX.
- Y. Cho et al., “Effects of Depolarizing Resonances on a Circulating Beam of Polarized Protons during Acceleration or Storage in a Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1509-1512.
- J. E. Lerch, J. A. Carter, P. K. Den Hartog, and G. E. Wiemerslage, “Design of the HGVPU Undulator Vacuum Chamber for LCLS-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 89-91.
- S. Hatakeyama et al., “The Data Acquisition System of Beam Position Monitors in J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB007, pp. 2698-2700.
- A. V. Feschenko and P. N. Ostroumov, “Bunch Shape Measuring Technique and its Application for an Ion Linac Tuning”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-30, pp. 323-327.
- F. H. de S?â, H. O. C. Duarte, and L. Liu, “Update of the Collective Effects Studies for Sirius”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3680-3683.
- M. Clinnick, J. Greer, J. Guggemos, R. Kilgore, and D. Rondeau, “Digital Controlled Frequency for Synchrotron Acceleration”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1261-1265.
- S. Kazakov, T. Higo, and S. Matsumoto, “T1011/TM11 Mixed-mode Waveguide Valve at X-band”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA014, pp. 3705-3707.
- R. H. A. Farias, L. C. Jahnel, and P. F. Tavares, “Optical Beam Diagnostics for the LNLS Synchrotron Light Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P060, pp. 2238-2240.
- R. DiGennaro et al., “The Design of a High Current, High Duty Factor RFQ for the SNS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6A07, pp. 495-497.
- C. E. T. Goncalves da Silva, A. R. Rodrigues, and D. Wisnivesky, “LNLS: The Brazilian Synchrotron Light Laboratory”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1248-1250.
- B. Autin et al., “Beam Optics Studies on the Antiproton Accumulator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2055-2058.
- R. Cirami et al., “An OPC-UA Based Architecture for the Control of the ESPRESSO Spectrograph @ VLT”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB07, pp. 70-73.
- T. Chen and D. Rubin, “Single Beam Crab Dynamics”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1642-1645.
- J. Billan et al., “Performance of Series-design Prototype Main Quadrupoles for the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A15, pp. 2172-2174.
- A. R. D. Rodrigues et al., “Commissioning and Operations of the Brazilian Synchrotron Light Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V018, pp. 811-813.
- V. Conforti et al., “Procedures of Software Integration Test and Release for ASTRI SST-2m Prototype Proposed for the Cherenkov Telescope Array”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 370-374.
- T. Bhatia, J. H. Billen, A. Cucchetti, F. W. Guy, G. Neuschaefer, and L. Young, “Beam Dynamics Design of an RFQ for the SSC Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1884-1887.
- C. Y. Wu et al., “Timing System of the Taiwan Photon Source”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS013, pp. 999-1002.
- R. A. Legg, M. V. Fisher, K. J. Kleman, T. L. Grimm, R. Jecks, and B. Kuhlman, “Development of a Frequency Map for the WiFEL SRF Gun”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO032, pp. 151-153.
- P. Xu, T. R. Bieler, and N. T. Wright, “Comparison of the Lattice Thermal Conductivity of Superconducting Tantalum and Niobium”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 148-153.
- R. Flora, J. Saariviria, G. Tool, and D. Voy, “The Energy Saver/Doubler Quench Protection Monitor System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3289-3292.
- C. C. A. de Villiers, “MeerKAT Poster and Demo Control and Monitoring Highlights”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC023, pp. 594-595.
- K. Niki et al., “Design and Test of 2-4MHz Sawtooth-wave Pre-buncher for 26MHz-RFQ”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB011, pp. 3903-3905.
- E. Trakhtenberg, P. K. Den Hartog, and G. E. Wiemerslage, “Extruded Aluminum Vacuum Chambers for Insertion Devices”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOBS5, pp. 2093-2095.
- H. Chen, J. Gao, Q. X. Jin, R. K. Li, and Y. Z. Lin, “The Beam Characteristics of Intensity-modulated Radiotherapy 6MeV Standing Wave Accelerating Tube”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA016, pp. 97-99.
- M. M. Peng, W. Gai, J. Shi, Z. H. Wang, and H. Zha, “Development of an Half-Cell Accelerating Structure in Tsinghua”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4023-4025.
- K. Woods, R. J. Clegg, R. Millward, F. Barnsely, and C. Jones, “Scalable High Demand Analytics Environments with Heterogeneous Clouds”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 170.
- S. C. L. Srivastava, T. Basak, R. Pande, S. Roy, P. Singh, and V. L. SR. sista, “Study of Space Charge Compensation In LEBT”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA045, pp. 384-386.
- R. Cee, T. Haberer, A. Peters, S. Scheloske, and T. Winkelmann, “Intensity Upgrade Programme for the HIT Injector Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP113, pp. 1788-1790.
- A. F. Pietryla, A. E. Grelick, and W. E. Norum, “Development of a New Phase Detector for the APS Linac”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP031, pp. 468-470.
- A. V. Feschenko and P. N. Ostroumov, “Bunch Shape Analyser with Transverse Scanning of the Low Energy Secondary Electrons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 750-753.
- M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
- S. B. Leith, X. Jiang, Z. Khalil, A. S. H. Mohamed, and M. Vogel, “Initial Results from Investigations into Different Surface Peparation Techniques of OFHC Copper for SRF Applications”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 941-944.
- H. O. C. Duarte, P. P. S. Freitas, A. R. D. Rodrigues, R. M. Seraphim, and T. M. da Rocha, “Design Review of Bellows RF-Shielding Types and New Concepts for Sirius”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 53-56.
- J. Saisut, G. Asova, M. Krasilnikov, S. Rimjaem, F. Stephan, and C. Thongbai, “Low-charge Simulations for Phase Space Tomography Diagnostics at the PITZ Facility”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB10, pp. 414-417.
- A. P. Sumbaev et al., “LUE-200 Linac. Status & Development”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP096, pp. 653-655.
- C. Saisa-ard and S. Rimjaem, “Simulation and Design of Low Emittance RF Electron Gun”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 455-458.
- R. Cirami, I. Coretti, P. Di Marcantonio, M. Pucillo, A. Santin, and P. Santin, “The EVALSO Project: Software/Hardware Architecture and Remote Tests Results”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP092, pp. 853-855.
- T. K. Kroc, T. B. Bolshakov, A. V. Burov, S. Seletsky, and A. V. Shemyakin, “Electron Beam Size Measurements in a Cooling Solenoid”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT069, pp. 3801-3803.
- T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
- N. R. Lobanov and D. C. Weisser, “Lead Plating: ANU SLRs Upgrade”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP003, pp. 129-142.
- D. Casavant et al., “Testing and Quality Assurance of the Control System during NIF Commissioning”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MO201, pp. XX-XX.
- M. Awschalom, G. M. Lee, M. L. Palmer, and D. E. Young, “The Fermilab Neutron Radiotherapy Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1055-1058.
- T. Friedrich and M. T?Ârngren, “Surveying Software Technology for Accelerator Control Systems”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOY03, pp. 16-18.
- M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3283-3285.
- M. L. Petrosyan et al., “Experiments on Wake Field Acceleration in Plasma and the Program of the Further Works in YerPhI”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE001, pp. 752-754.
- B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
- W. Leemans, S. Chattopadhyay, M. Conde, R. Govil, M. de Loos, and B. van der Geer, “Plasma Production for the 50 MeV Plasma Lens Experiment at LBL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 831-834.
- S. F. Fukuta et al., “Database for Control System of J-PARC 3 GeV RCS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA26, pp. 567-569.
- J. G. Kohr, R. M. Rose, and B. P. Strauss, “Development of a New Practical High-Tc Superconducting Conductor Material”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 716-718.
- V. Kovarik et al., “Low-Level RF System for the AGS Light Ion Program”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1585-1588.
- T. Chen, J. Irwin, and R. Siemann, “Simulation of Beam-Beam Lifetime for LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1356-1359.
- J.-P. Koutchouk, “The LHC Dynamic Aperture”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECR1, pp. 372-376.
- J. Cerny III et al., “BEARS (Berkeley Experiments with Accelerated Radioactive Species)”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THDL7, pp. 533-535.
- U. Epting, “Computing and Network Infrastructure for Controls CNIC”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O2_009.
- R. W. Fast and M. A. Otavka, “Liquid Deuterium Neutron Attenuator for Broad-Band Photon Beam Facility”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1201-1204.
- R. Schwemmer and N. Neufeld, “Implementing High Availability with COTS Components and Open-source Software”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WED005, pp. 624-626.
- G. M. Lee and C. D. Curtis, “High Gradient Accelerating Column Design and Construction”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 129-134.
- C. Viviani, G. M. A. Calvi, L. Lanzavecchia, M. Manzini, A. Parravicini, and E. Rojatti, “Beam Profile Monitors for the CNAO Experimental Line”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 328-331.
- T. B. Bolshakov, A. D. Petrov, and S. L. Lackey, “Synoptic Display - A Client-Server System for Graphical Data Representation”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP505, pp. XX-XX.
- T. Tajima et al., “Test Results of ?ƒ=0.64, 700 MHz, 5-cell Elliptical Cavities”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PH002, pp. XX-XX.
- J. Yan, T. L. Allison, B. Bevins, A. Cuffe, and C. Seaton, “New EPICS/RTEMS IOC Based on Altera SOC at Jefferson Lab”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 304-306.
- P. Wang et al., “Experimental Study on PM-AM Method in Pulse Compression System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4230-4232.
- G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
- J.-P. Carneiro, B. M. Hanna, L. R. Prost, V. E. Scarpine, and A. V. Shemyakin, “Beam Measurements at the PIP-II Injector Test LEBT”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 636-638.
- R. T. P. D, B. M. Hanna, L. R. Prost, V. E. Scarpine, A. V. Shemyakin, and J. Steimel, “Distinct Transverse Emittance Measurements of the PXIE LEBT”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD01, pp. 393-397.
- R. T. Sanders et al., “The AGS Booster Low Frequency RF System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 739-742.
- S. K. Esin et al., “Beam Loss Study at High Intensity Proton Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 754-757.
- R. Cirami et al., “FORS-Up: An Upgrade of the FORS2 Instrument @ ESO VLT”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 252.
- I. Prieto Barreiro and M. Sobieszek, “Big Data Archiving From Oracle to Hadoop”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 498.
- J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
- C. Roderick, L. Burdzanowski, D. Martin Anido, S. Pade, and P. Wilk, “Accelerator Fault Tracking at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 397-400.
- A. Patoux, J. Perot, and J. M. Rifflet, “Test of New Accelerator Superconducting Dipoles Suitable for High Precision Field”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3681-3684.
- M. Vogel, X. Jiang, and C. Schlemper, “Carbon-based Coatings for Electron Cloud Mitigation in SRF Photocathodes”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 910-913.
- K. A. Young et al., “5 MW 805 MHz SNS RF System Experience”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT054, pp. 3280-3282.
- C. D. Curtis, J. A. Fasolo, and G. M. Lee, “Initial Tests of the MURA High Gradient Column”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VII-03, pp. 365-370.
- E. Harms, B. Hendricks, G. Lee, and T. Williams, “Instrumentation for the Tevatron Beam Dump”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2771-2774.
- C. Gaspar, “An Overview of the LHC Experiments' Control Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOAAB01, pp. 982-986.
- M. de Jong, “Overview of New Light Sources”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA002, pp. 220-223.
- W. T. Ford, W. Kozanecki, T. Lohse, and R. V. Servranckx, “Interactive Beam Tuning Simulator for the SLC Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1684-1687.
- G. Tortone et al., “Web Based Visualization Tools for Epics Embedded Systems: An Application to Belle2”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1857-1860.
- J. Miertusova, “Vacuum Performance Characteristic of a 5m-long Pump Free Insertion Device Vacuum Chamber for ELETTRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP19C, pp. 2190-2192.
- M. Plotkin, “Isabelle Cavity Gap Assemblies”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2752-2755.
- D. Gurd et al., “Recent Developments in the TRIUMF Control System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 631-634.
- L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
- L. G. Cardoso, C. Gaspar, and R. Jacobsson, “Automated Voltage Control in LHCb”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN028, pp. 304-307.
- R. B. Meinke, M. J. Ball, and C. L. Goodzeit, “Cost-Effective High-Field Magnets for Future Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH090, pp. 3442-3444.
- A. E. Grelick, A. R. Cours, N. P. Di Monte, A. Nassiri, T. Smith, and G. J. Waldschmidt, “The Advanced Photon Source Pulsed Deflecting Cavity RF System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN085, pp. 2224-2226.
- G. R. White, Y. Cai, R. O. Hettel, M. A. G. Johansson, V. Yakimenko, and G. Yocky, “A Compact 335 MeV Positron Damping Ring Design for FACET-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3652-3655.
- R. Martini, K. Sigerud, N. Stapley, A. S. Suwalska, and P. Sollander, “Alarms Configuration Management”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB03, pp. 606-608.
- A. V. Pavlenko, A. M. Batrakov, G. V. Karpov, I. B. Nikolaev, and V. V. Svishchev, “Method of Broadband Stabilization of the VEPP-4M Main Field”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA29, pp. 100-102.
- D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, and A. Y. Orlov, “A Counting Module for an Advanced Ionization Profile Monitor”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC060, pp. 1194-1196.
- P. Xu, N. T. Wright, and T. R. Bieler, “Effect Of Dislocations On the Thermal Conductivity Of Superconducting Nb”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 886-890.
- G. M. Kazakevich, Y. U. Jeong, G. I. Kuznetsov, B. C. Lee, S. H. Park, and V. M. Pavlov, “Optimization of the Injection System for Microtron-Based Terahertz FEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH036, pp. 403-406.
Back to search