Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Smythe, “A Fractional Turn Injector Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A10, pp. XX-XX.
[n] D. Boussard, “Self Focusing in Heavy Ion Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-03, pp. 96-103.
[n] R. R. Stevens, P. Schafstall, J. D. Schneider, J. Sherman, T. Zaugg, and T. Taylor, “DC Proton Beam Measurements in a Single-Solenoid Low-Energy Beam Transport System”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-78, pp. 549-551.
[n] A. Uchiyama et al., “Design of Reliable Control with Star Topology Fieldbus Communications for an Electron Cyclotron Resonance Ion Source at RIBF”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 105-108. doi:10.18429/JACoW-PCaPAC2018-WEP30
[n] W. Chupp et al., “Operating Experience with a High Current Cs! Injector for Heavy Ion Fusion”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3389-3392.
[n] M. Bai, “Non-destructive Beam Measurements”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEXLH01, pp. 165-169.
[n] G. Navrotski and B. Brajuskovic, “Metallurgical Evaluation of Dissimilar Metal Joints for Accelerator Vacuum Chamber Construction at the Advanced Photon Source Upgrade Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 220-222. doi:10.18429/JACoW-MEDSI2016-TUPE25
[n] R. Klatt and T. Weiland, “Wake Field Calculations with Three-Dimensional BCI Code”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-15, pp. 282-285.
[n] J. Sekutowicz, N. Mildner, M. Dohlus, and K. Zapfe, “A Beam Line HOM Absorber for the European XFEL Linac”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP55, pp. 593-595.
[n] S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
[n] Y. Z. Chen, Z. C. Chen, D. K. Liu, W. M. Zhou, and Y. B. Leng, “Scope-Embedded IOC Development in SSRF”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA14, pp. 117-119.
[n] A. Tuzikov et al., “Beam Transfer Systems of NICA Facility: from HILAC to Booster”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 61-64. doi:10.18429/JACoW-RuPAC2021-WEA01
[n] C. Fischer, “Coping with Alignment Tolerances on CLIC Components in the 10 mum Range”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 683-686.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Smythe, “A Fractional Turn Injector Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A10, pp. XX-XX.
- D. Boussard, “Self Focusing in Heavy Ion Linacs”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-03, pp. 96-103.
- R. R. Stevens, P. Schafstall, J. D. Schneider, J. Sherman, T. Zaugg, and T. Taylor, “DC Proton Beam Measurements in a Single-Solenoid Low-Energy Beam Transport System”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-78, pp. 549-551.
- A. Uchiyama et al., “Design of Reliable Control with Star Topology Fieldbus Communications for an Electron Cyclotron Resonance Ion Source at RIBF”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 105-108.
- W. Chupp et al., “Operating Experience with a High Current Cs! Injector for Heavy Ion Fusion”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3389-3392.
- M. Bai, “Non-destructive Beam Measurements”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEXLH01, pp. 165-169.
- G. Navrotski and B. Brajuskovic, “Metallurgical Evaluation of Dissimilar Metal Joints for Accelerator Vacuum Chamber Construction at the Advanced Photon Source Upgrade Project”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 220-222.
- R. Klatt and T. Weiland, “Wake Field Calculations with Three-Dimensional BCI Code”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-15, pp. 282-285.
- J. Sekutowicz, N. Mildner, M. Dohlus, and K. Zapfe, “A Beam Line HOM Absorber for the European XFEL Linac”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP55, pp. 593-595.
- S. Calatroni, C. Benvenuti, P. Darriulat, M. A. Peck, A.-M. Valente, and C. A. Van, “High-Q, High Gradient Niobium-Coated Cavities at CERN”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA002, pp. 6-9.
- Y. Z. Chen, Z. C. Chen, D. K. Liu, W. M. Zhou, and Y. B. Leng, “Scope-Embedded IOC Development in SSRF”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA14, pp. 117-119.
- A. Tuzikov et al., “Beam Transfer Systems of NICA Facility: from HILAC to Booster”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 61-64.
- C. Fischer, “Coping with Alignment Tolerances on CLIC Components in the 10 mum Range”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 683-686.
Back to search
