JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. J. Bocchetta, D. Bulfone, J.-C. Denard, and M. Plesko, “The Diagnostic Line for the Acceptance Tests of the ELETTRA 100 MeV Pre-Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1097-1100. 
[n]	C. J. Wang, K. H. Hu, and C. Kuo, “Integration of New Digital BPM in the Taiwan Light Source”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_050. 
[n]	P. Vagin, O. Bilani, A. Sch?Âps, M. Tischer, S. Tripathi, and T. Vielitz, “Radiation Damage of Undulators at PETRA III”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2019-2021. doi:10.18429/JACoW-IPAC2014-WEPRO035
[n]	V. Gupta and G. Mishra, “Three Frequency Undulator Radiation FEL Gain of Betatron Oscillations and Beam Energy Spread”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP071, pp. XX-XX. 
[n]	G. Sharma, G. Mishra, and S. Tripathi, “Design and Magnetic Measurements on Bi-harmonic Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2013-2015. doi:10.18429/JACoW-IPAC2014-WEPRO033
[n]	J. C. Frisch et al., “Beam Measurements at LCLS”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOIOTIO02, pp. 17-26. 
[n]	A. Fabris, M. Bocciai, L. Bortolossi, M. Ottobretti, C. Pasotti, and M. Rinaldi, “Installation and Commissioning of the RF System for the New Elettra Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP084, pp. 745-747. 
[n]	O. Bilani et al., “Magnetic Tuning of FLASH2 Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1235-1237. doi:10.18429/JACoW-IPAC2014-TUPRO084
[n]	A. Brachmann et al., “LCLS RF Gun Copper Cathode Performance”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC134, pp. 3200-3202. 
[n]	D. Kostin et al., “SRF Accelerating Modules Repair at DESY”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 508. doi:10.18429/JACoW-SRF2021-TUPTEV011
[n]	Y. T. Ding et al., “Femtosecond Electron Beam and X-ray Beams at the Linac Coherent Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA086, pp. 1316-1318. 
[n]	P. M. Sal?®n et al., “Results from the Optical Replica Synthesizer at FLASH”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper THOB02, pp. 739-745. 
[n]	H. Delsim-Hashemi, Y. Holler, J. Ro?ƒbach, A. Sch?Âps, and M. Tischer, “Undulator System for a Seeded FEL Experiment at FLASH”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP070, pp. 2423-2425. 
[n]	D. Bulfone, “Overview of Fast Beam Position Feedback Systems”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUZM02, pp. 1021-1025. 
[n]	R. P. Wells, B. Ghiorso, F. Sannibale, J. W. Staples, and T. M. Huang, “Design and Fabrication of a VHF - CW High Repetition Rate Electron Gun”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 733-735. doi:10.18429/JACoW-IPAC2014-MOPRI056
[n]	K. E. Hacker et al., “Demonstration of a BPM with 5 Micron Resolution over a 10cm Range”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC70, pp. 667-670. 
[n]	D. Einfeld, F. Iazzourene, H. O. Moser, and J. Schaper, “Lattice and Dynamical Behavior of the Light Source ANKA”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP039G, pp. 641-643. 
[n]	H. Jeevakhan, P. K. Purohit, and G. Mishra, “Influence of Horizantal Constant Magnetic Field on Harmonic Undulator Radiations and Gain”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 34-37. doi:10.18429/JACoW-FEL2015-MOP004
[n]	C. I. Clarke et al., “FACET: The New User Facility at SLAC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAB02, pp. 1953-1955. 
[n]	F. L?Âhl, “Femtosecond Resolution Beam Arrival Time Monitor”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOFNB01, pp. XX-XX. 
[n]	D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1158-1161. 
[n]	C. Pasotti et al., “The Elettra Radiofrequency System Status and Developments”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP098, pp. 1066-1068. 
[n]	V. G. Ziemann et al., “Recent Results from the Optical Replica Synthesizer Experiment in FLASH”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOB02, pp. 430-432. 
[n]	D. Castronovo, A. Fabris, C. Pasotti, P. Pittana, and M. Svandrlik, “Design of a 3rd Harmonic Superconducting Cavity for Bunch Lengthening in ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP16C, pp. 1879-1881. 
[n]	A. Fabris, C. Pasotti, P. Pittana, and M. Svandrlik, “Coupled Bunch Modes Measurement System at ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP03E, pp. 990-992. 
[n]	M. Bocciai, A. Fabris, C. Pasotti, M. Rinaldi, and M. Svandrlik, “Characterisation of the Low Level System of the ELETTRA RF Plants”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP085L, pp. 1917-1919. 
[n]	A. Fabris, M. Bocciai, C. Pasotti, and M. Rinaldi, “Installation and Commissioning of the New 150 kW Plant for the Elettra RF System Upgrade”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN016, pp. 2080-2082. 
[n]	S. Tripathi, V. Gupta, J. Hussain, and G. Mishra, “Three-Frequency Undulator Radiation and Free-Electron Laser Gain”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC18, pp. 79-82. 
[n]	L.-G. Wi?ƒmann et al., “Using an Ytterbium Fiber Laser Based Electro-Optic Experiment For Electron Bunch Diagnostic at FLASH”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC52, pp. 627-630. 
[n]	D. Einfeld, M. Plesko, and J. Schaper, “A Lattice Design to Reach the Theoretical Minimum Emittance for a Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP038G, pp. 638-640. 
[n]	M. Svandrlik et al., “A Power Protoype Design of an Accelerating Cavity with Broadband H. O. M. Suppressor”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2146-2149. 
[n]	M. Bocciai, A. Fabris, D. Lachi, C. Pasotti, M. Rinaldi, and M. Svandrlik, “Operational Experience with the ELETTRA RF System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP12C, pp. 1758-1760. 
[n]	K. E. Hacker et al., “Design and Drift Performance of the FLASH Master Laser Oscillator RF-Lock”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC69, pp. 663-666. 
[n]	C. P. Pasotti, M. Bocciai, P. Pittana, and M. Rinaldi, “Twenty Years of Operation of the Elettra RF System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3853-3855. doi:10.18429/JACoW-IPAC2014-THPRI041
[n]	A. Fabris et al., “RF System for the Elettra New Full Energy Booster Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN017, pp. 2083-2085. 
[n]	V. V. Vorobev, S. N. Galyamin, A. A. Grigoreva, and A. V. Tyukhtin, “Radiation From Open-Ended Flanged Waveguide With Dielectric Loading”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 516-518. doi:10.18429/JACoW-RUPAC2016-WEPSB068
[n]	H. Jeevakhan, S. Kumar, and G. Mishra, “Analysis of Electron Trajectories in Harmonic Undulator with SCILAB's Model Based Design Codes”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 93-97. doi:10.18429/JACoW-FLS2018-WEA2WD03
[n]	M. A. Harrison et al., “Implementation of a Corrugated-Plate Dechirping System for GeV Electron Beam at LCLS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 824-826. doi:10.18429/JACoW-IPAC2016-MOPOW049
[n]	G. Sharma et al., “CPMU development at diamond light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1200-1203. doi:10.18429/JACoW-IPAC2023-MOPM096
[n]	N. Neufeld, E. Bonaccorsi, L. Brarda, J. Closier, H. Degaudenzi, and G. Moine, “Software Management in the LHCb Online System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP002, pp. 99-101. 
[n]	H. Jeevakhan and G. Mishra, “Harmonic Undulator Radiation with Dual Non Periodic Magnetic Components”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 98-102. doi:10.18429/JACoW-FLS2018-WEA2WD04
[n]	P. Craievich, A. Fabris, C. Pasotti, P. Pittana, and M. Svandrlik, “Field Measurement of the ELETTRA Cavity Higher Order Modes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20C, pp. 1802-1804. 
[n]	C. Pasotti, P. Pittana, and M. Svandrlik, “Superconducting Cavities for the Reduced-Beta Section of a Proton Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P032, pp. 3099-3101. 
[n]	Y. Ishi et al., “Synchrotron Design Issues of the Japanese Hadron Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP068G, pp. 569-571. 
[n]	M. Tischer, A. Sch?Âps, and P. Vagin, “Temperature Effects of the FLASH2 Undulators”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP008, pp. 34-36. 
[n]	A. A. Grigoreva, S. N. Galyamin, A. V. Tyukhtin, and V. V. Vorobev, “The Electromagnetic Field Structure in the Circular Waveguide with Transverse Boundary”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 435-437. doi:10.18429/JACoW-RUPAC2016-WEPSB034
[n]	D. Einfeld, J. Schaper, and M. Plesko, “Design of a Diffraction Limited Light Source (DIFL)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG08, pp. 177-179. 
[n]	R. Brinkmann, D. Einfeld, M. Plesko, and J. Schaper, “Design of a Damping Ring for the SB-Linear-Collider Project at DESY”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W005, pp. 336-338. 
[n]	D. Einfeld, M. Plesko, and J. Schaper, “A Low Emittance Optics for a Pure Insertion Device Lattice”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 633-636. 
[n]	D. Bulfone, V. Forchi, G. Gaio, L. Pivetta, and M. Lonza, “A Fast Orbit Feedback for the ELETTRA Storage Ring”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA20, pp. 558-560. 
[n]	L. Lilje, “Experience with the TTF-2”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPE001, pp. 1-3. 
[n]	E. Syresin, K. Noda, and T. Tanabe, “Interaction of Stored Ions with Electron Target in Low Energy Electrostatic Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEODCH02, pp. 162-164. 
[n]	S. Tripathi, R. K. Bhandari, S. Ghosh, D. Kanjilal, U. Lehnert, and M. Tischer, “Design of a Compact Hybrid Undulator for the THz Radiation Facility of Delhi Light Source (DLS)”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 532-534. doi:10.18429/JACoW-FEL2017-WEP057
[n]	S. Ghosh et al., “Progress of Delhi Light Source at IUAC, New Delhi”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 149-152. doi:10.18429/JACoW-FEL2017-MOP046
[n]	T. J. Joannem, S. Berry, Q. Bertrand, C. Boulch, and G. Monnereau, “Mobile Pumping Units for Particle Free Beam Vacuum”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 494-497. doi:10.18429/JACoW-ICALEPCS2023-TUPDP009
[n]	V. J. Joshi et al., “Design Calculation on Beam Dynamics and THz Radiation of Delhi Light Source”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 153-155. doi:10.18429/JACoW-FEL2017-MOP047
[n]	M. Massarotti et al., “The RF System of ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1853-1856. 
[n]	M. Seidel, R. Bospflug, J. Boster, W. Giesske, U. Naujoks, and M. Schwartz, “The Vacuum System for PETRA III”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE037, pp. 2473-2475. 
[n]	D. Bulfone and F. Potepan, “An Original Approach to Commissioning with the ELETTRA Control System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1767-1770. 
[n]	R. Sirvinskaite et al., “NEG Coating for PETRA IV: Resistivity and Sticking Probability Measurements”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA135, unpublished. 
[n]	O. S. Kozlov et al., “NICA Collider Lattice Optimization”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 166-168. doi:10.18429/JACoW-RUPAC2016-FRCAMH07

For LaTeX

Use Complete Form

For BibTeX

References

Back to search