Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Joubert, “Status Report on the First Six Years of GANIL Operation”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-06, pp. 101-105.
[n] D. Dowell, F. King, R. E. Kirby, and J. F. Schmerge, “Comparison between H-ion and Heat Cleaning of Cu-metal Cathodes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH193, pp. 3245-3247.
[n] S. Myers, “The Performance of LEP and Future Developments”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 13-18.
[n] W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
[n] J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
[n] V. Bookwalter, B. Madre, and C. E. Reece, “Flexible application of the JLab pansophy information system for project reports, process monitoring, and R&D sample tracking”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP49, pp. XX-XX.
[n] W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
[n] P. Yuan et al., “Laser Evaporated Aluminium in ECR2 Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-10, pp. 430-432.
[n] M. Qian, D. Haskel, D. Jensen Jr, Y. Piao, and J. Xu, “Design of an X-undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1379-1382. doi:10.18429/JACoW-IPAC2024-TUPG57
[n] E. Vogel et al., “Considerations on the third harmonic RF of the European XFEL”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP17, pp. XX-XX.
[n] E. A. McEwen, V. Bookwalter, J. Leung, J. N. Blowers, and J. B. Szal, “Status of LCLS-II QA Systems Collaboration for Cyromodule Construction at TJNAF and FNAL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB120, pp. 1422-1424.
[n] R. Wang and N. Chen, “Environmental Radiation Surveillance and Area Monitoring System of Accelerators”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-09, pp. 408-411.
[n] D. E. Suddeth, “Air-Filled Ion Chamber Beam Loss Monitors for the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 602-605.
[n] M. E. Angoletta, S. C. P. Albright, A. Findlay, M. Jaussi, J. C. Molendijk, and V. R. Myklebust, “A New Digital Low-Level RF and Longitudinal Diagnostic System for CERNÔÇÖs AD”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3966-3969. doi:10.18429/JACoW-IPAC2019-THPRB070
[n] A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1825-1826.
[n] D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. P. Verboncoeur, “Simulations of Pulse Propagation in the Laser Wakefield Accelerator using a Massively-Parallel Object-Oriented Particle in Cell Code”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B05, pp. 907-909.
[n] O. Berrig, D. Lohmann, G. Morpurgo, and H. Schmickler, “Real-time Monitoring of Beam-beam Modes at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13H, pp. 1568-1570.
[n] W. Anders, A. Heugel, H.-G. Hoberg, S. Klauke, G. Mielczarek, and T. Westphal, “Highly Stable IOT Based 1,3 GHz / 16KW RF Power Source for CW Operated SC Linacs”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO045, pp. 679-682.
[n] L. Pivetta, F. Giacuzzo, G. Scalamera, and D. Vittor, “Controls and Interlocks for the New Elettra Super Conducting Wiggler”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 342-345. doi:10.18429/JACoW-ICALEPCS2015-MOPGF113
[n] X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n] N. Tsoupas et al., “Electromagnetic Study and Measurements of the iRCMS Cell”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 403-405. doi:10.18429/JACoW-IPAC2019-MOPGW123
[n] B. P. Strauss, G. H. Biallas, and R. J. Powers, “How to Mass Product Reliable Cryostats for large Particle Accelerators”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3941-3944.
[n] M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 725-728. doi:10.18429/JACoW-ICALEPCS2015-WEPGF015
[n] E. Harms, “Operational Experience with the Fermilab Antiproton Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1999-2002.
[n] C. Lyneis, M. McAshan, and V. Nguyen, “Recent Measurements of S-Band and L-Band Cavities at Stanford”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper E02, pp. 98-102.
[n] C. Jamet, T. Andre, P. Legallois, S. Leloir, and C. Potier de courcy, “RF Calibration and Distribution devices for SPIRAL2 BPMs”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP015, unpublished.
[n] G. Parzen and K. Jellett, “Saturation Effects in High-Field Superconducting Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 646-649.
[n] P. Yuan et al., “The Preliminary Explanation of a New Working Model on 10 GHz ECR2 Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-02, pp. 402-404.
[n] S. Arjmand et al., “Spectroscopic Measurements as Diagnostic Tool for Plasma-Filled Capillaries”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1776-1779. doi:10.18429/JACoW-IPAC2022-WEPOST035
[n] Y. J. Chen, G. Caporaso, and J. Weir, “Experimental Results of the Active Deflection of a Beam from a Kicker System”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4105, pp. 1007-1009.
[n] J. Van Zeijts and R. Lee, “An Online Longitudinal Vertex and Bunch Spectrum Monitor for RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT184, pp. 2882-2884.
[n] A. S. Chepurnov, K. A. Gudkov, and A. V. Shumakov, “Digital Control of RTM LINAC RF System with DSP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1845-1848.
[n] D. Fiander et al., “The Injection Kicker System of the CERN Antiproton Accumulator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2949-2952.
[n] C. Lyneis, “Electron Loading - Description and Cures”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-6, pp. XX-XX.
[n] W. Le Coz, T. A. Andre, C. Doutresssoulles, C. Jamet, and S. Loret, “SPIRAL2 Beam Energy Measurement”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD92, pp. 524-526.
[n] G. S?®n?®cal et al., “GANIL High Intensity Transport Safety System”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-04, pp. 291-293.
[n] P. Aeschimann, L. Besse, and I. Jirousek, “Therapy Controller Designed for Patient Irradiation at the SIN --Applicator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-15, pp. 2277-2280.
[n] A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 85. doi:10.18429/JACoW-MEDSI2020-MOPC14
[n] E. Carlier et al., “Design Aspects Related to the Reliability of the Control Architecture of the LHC Beam Dump Kicker Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH213, pp. XX-XX.
[n] J. G. Ding, L. R. Shen, H. Zhao, and H. J. Zhu, “A Prototype of the SSRF Power Supply Control System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA026, pp. 139-141.
[n] F. Calderini, B. Pawlowski, N. Stapley, and M. W. Tyrrell, “Moving Towards a Common Alarm Service for the LHC Era.”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH512, pp. XX-XX.
[n] J. Riedel and J. Vincent, “The RF Systems of the MSU K500 and K800 Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper H05, pp. 315-316.
[n] J. J. Knopp, “Notch Geometry Optimization of APS Upgrade High Heat Load Mirror Systems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPC06, pp. XX-XX.
[n] S. Hashimoto et al., “First Observation of Quasiperiodic Undulator Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP061G, pp. 2549-2551.
[n] H. Dollard, D. R. Heywood, D. E. Marquardt, D. P. Gurd, and R. R. Johnson, “CAMAC Controls Applications at TRIUMF”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 485-490.
[n] Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
[n] Y. A. Fomin, V. Korchuganov, and A. S. Smygacheva, “The Use of Multi-Objective Genetic Algorithms for Accelerator and Light Source Optimization”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 377-379. doi:10.18429/JACoW-RUPAC2016-WEPSB010
[n] G. Molinari and H. Mulder, “The Improved Ultra Slow Extraction Noise System at LEAR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2376-2379.
[n] R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1303-1306.
[n] A. V. Petrenko and I. L. Sheinman, “High-Energy Micro-Buncher Based on the mm-Wavelength Dielectric Structure”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 304-307. doi:10.18429/JACoW-RUPAC2016-TUPSA041
[n] R. Demitra, A. Biagioni, L. Crincoli, M. Ferrario, and R. Pompili, “3D characterization of plasma density in capillary discharges for plasma-based accelerators”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1608-1610. doi:10.18429/JACoW-IPAC2025-TUPS113
[n] M. J. Knott, D. H. Nordby, and C. A. Swoboda, “On-Line Computer Preparation of Tune Profiles of the Zero Gradient Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1057-1061.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Joubert, “Status Report on the First Six Years of GANIL Operation”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-06, pp. 101-105.
- D. Dowell, F. King, R. E. Kirby, and J. F. Schmerge, “Comparison between H-ion and Heat Cleaning of Cu-metal Cathodes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH193, pp. 3245-3247.
- S. Myers, “The Performance of LEP and Future Developments”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 13-18.
- W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
- J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
- V. Bookwalter, B. Madre, and C. E. Reece, “Flexible application of the JLab pansophy information system for project reports, process monitoring, and R&D sample tracking”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP49, pp. XX-XX.
- W. A. Ryan and T. J. Shea, “An Sampling Detector for the RHIC BPM Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ04, pp. 2455-2457.
- P. Yuan et al., “Laser Evaporated Aluminium in ECR2 Ion Source”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-10, pp. 430-432.
- M. Qian, D. Haskel, D. Jensen Jr, Y. Piao, and J. Xu, “Design of an X-undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG57, pp. 1379-1382.
- E. Vogel et al., “Considerations on the third harmonic RF of the European XFEL”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP17, pp. XX-XX.
- E. A. McEwen, V. Bookwalter, J. Leung, J. N. Blowers, and J. B. Szal, “Status of LCLS-II QA Systems Collaboration for Cyromodule Construction at TJNAF and FNAL”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB120, pp. 1422-1424.
- R. Wang and N. Chen, “Environmental Radiation Surveillance and Area Monitoring System of Accelerators”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-09, pp. 408-411.
- D. E. Suddeth, “Air-Filled Ion Chamber Beam Loss Monitors for the Zero Gradient Synchrotron (ZGS)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 602-605.
- M. E. Angoletta, S. C. P. Albright, A. Findlay, M. Jaussi, J. C. Molendijk, and V. R. Myklebust, “A New Digital Low-Level RF and Longitudinal Diagnostic System for CERNÔÇÖs AD”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3966-3969.
- A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1825-1826.
- D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. P. Verboncoeur, “Simulations of Pulse Propagation in the Laser Wakefield Accelerator using a Massively-Parallel Object-Oriented Particle in Cell Code”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B05, pp. 907-909.
- O. Berrig, D. Lohmann, G. Morpurgo, and H. Schmickler, “Real-time Monitoring of Beam-beam Modes at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP13H, pp. 1568-1570.
- W. Anders, A. Heugel, H.-G. Hoberg, S. Klauke, G. Mielczarek, and T. Westphal, “Highly Stable IOT Based 1,3 GHz / 16KW RF Power Source for CW Operated SC Linacs”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO045, pp. 679-682.
- L. Pivetta, F. Giacuzzo, G. Scalamera, and D. Vittor, “Controls and Interlocks for the New Elettra Super Conducting Wiggler”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 342-345.
- X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4298-4300.
- N. Tsoupas et al., “Electromagnetic Study and Measurements of the iRCMS Cell”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 403-405.
- B. P. Strauss, G. H. Biallas, and R. J. Powers, “How to Mass Product Reliable Cryostats for large Particle Accelerators”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3941-3944.
- M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 725-728.
- E. Harms, “Operational Experience with the Fermilab Antiproton Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1999-2002.
- C. Lyneis, M. McAshan, and V. Nguyen, “Recent Measurements of S-Band and L-Band Cavities at Stanford”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper E02, pp. 98-102.
- C. Jamet, T. Andre, P. Legallois, S. Leloir, and C. Potier de courcy, “RF Calibration and Distribution devices for SPIRAL2 BPMs”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP015, unpublished.
- G. Parzen and K. Jellett, “Saturation Effects in High-Field Superconducting Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 646-649.
- P. Yuan et al., “The Preliminary Explanation of a New Working Model on 10 GHz ECR2 Source”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-02, pp. 402-404.
- S. Arjmand et al., “Spectroscopic Measurements as Diagnostic Tool for Plasma-Filled Capillaries”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1776-1779.
- Y. J. Chen, G. Caporaso, and J. Weir, “Experimental Results of the Active Deflection of a Beam from a Kicker System”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4105, pp. 1007-1009.
- J. Van Zeijts and R. Lee, “An Online Longitudinal Vertex and Bunch Spectrum Monitor for RHIC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT184, pp. 2882-2884.
- A. S. Chepurnov, K. A. Gudkov, and A. V. Shumakov, “Digital Control of RTM LINAC RF System with DSP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1845-1848.
- D. Fiander et al., “The Injection Kicker System of the CERN Antiproton Accumulator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2949-2952.
- C. Lyneis, “Electron Loading - Description and Cures”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-6, pp. XX-XX.
- W. Le Coz, T. A. Andre, C. Doutresssoulles, C. Jamet, and S. Loret, “SPIRAL2 Beam Energy Measurement”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD92, pp. 524-526.
- G. S?®n?®cal et al., “GANIL High Intensity Transport Safety System”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-04, pp. 291-293.
- P. Aeschimann, L. Besse, and I. Jirousek, “Therapy Controller Designed for Patient Irradiation at the SIN --Applicator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-15, pp. 2277-2280.
- A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 85.
- E. Carlier et al., “Design Aspects Related to the Reliability of the Control Architecture of the LHC Beam Dump Kicker Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH213, pp. XX-XX.
- J. G. Ding, L. R. Shen, H. Zhao, and H. J. Zhu, “A Prototype of the SSRF Power Supply Control System”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA026, pp. 139-141.
- F. Calderini, B. Pawlowski, N. Stapley, and M. W. Tyrrell, “Moving Towards a Common Alarm Service for the LHC Era.”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH512, pp. XX-XX.
- J. Riedel and J. Vincent, “The RF Systems of the MSU K500 and K800 Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper H05, pp. 315-316.
- J. J. Knopp, “Notch Geometry Optimization of APS Upgrade High Heat Load Mirror Systems”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPC06, pp. XX-XX.
- S. Hashimoto et al., “First Observation of Quasiperiodic Undulator Radiation”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP061G, pp. 2549-2551.
- H. Dollard, D. R. Heywood, D. E. Marquardt, D. P. Gurd, and R. R. Johnson, “CAMAC Controls Applications at TRIUMF”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 485-490.
- Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
- Y. A. Fomin, V. Korchuganov, and A. S. Smygacheva, “The Use of Multi-Objective Genetic Algorithms for Accelerator and Light Source Optimization”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 377-379.
- G. Molinari and H. Mulder, “The Improved Ultra Slow Extraction Noise System at LEAR”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2376-2379.
- R. Bellone et al., “Beam Tests of a 36 mm Lithium Lens”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1303-1306.
- A. V. Petrenko and I. L. Sheinman, “High-Energy Micro-Buncher Based on the mm-Wavelength Dielectric Structure”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 304-307.
- R. Demitra, A. Biagioni, L. Crincoli, M. Ferrario, and R. Pompili, “3D characterization of plasma density in capillary discharges for plasma-based accelerators”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS113, pp. 1608-1610.
- M. J. Knott, D. H. Nordby, and C. A. Swoboda, “On-Line Computer Preparation of Tune Profiles of the Zero Gradient Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1057-1061.
Back to search