Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 111-113. doi:10.18429/JACoW-ECRIS2016-WEPP18
[n] J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
[n] A. S. Fisher, R. Holtzapple, A. Novokhatski, J. L. Turner, U. Wienands, and G. Yocky, “Bunch-Length Measurements in PEP-II”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP026, pp. 1934-1936.
[n] J. A. Balmer and L. A. Welbourne, “A Study of Thermally Induced Movement in SRS Storage Ring Quadrupole Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2561-2564.
[n] W. Thongpakdi and S. Rimjaem, “Development of Injector System for MIR/THz Free-Electron Laser Facility in Thailand”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2767-2769. doi:10.18429/JACoW-IPAC2017-WEPAB084
[n] K. Kosaentor and S. Rimjaem, “Study on Electron Beam Transverse Emittance at the Linac-based THz Laboratory in Thailand”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3017-3019. doi:10.18429/JACoW-IPAC2016-WEPOY018
[n] A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2503-2506.
[n] R. Cai et al., “LHC crystal collimation tests with 6.8 Z TeV Pb beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2503-2506. doi:10.18429/JACoW-IPAC2023-TUPM120
[n] J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
[n] F. Cianciosi et al., “The Girders System for the New ESRF Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 147-151. doi:10.18429/JACoW-MEDSI2016-TUCA06
[n] C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
[n] T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
[n] N. N. Alexeev et al., “Development of MHF Conception at ITEP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 74-78. doi:10.18429/JACoW-RUPAC2016-WEYMH01
[n] H. Lovelace III et al., “Injecting and Ramping Trapped Beam in Hadron Accelerator”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1304, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 111-113.
- J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
- A. S. Fisher, R. Holtzapple, A. Novokhatski, J. L. Turner, U. Wienands, and G. Yocky, “Bunch-Length Measurements in PEP-II”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP026, pp. 1934-1936.
- J. A. Balmer and L. A. Welbourne, “A Study of Thermally Induced Movement in SRS Storage Ring Quadrupole Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2561-2564.
- W. Thongpakdi and S. Rimjaem, “Development of Injector System for MIR/THz Free-Electron Laser Facility in Thailand”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2767-2769.
- K. Kosaentor and S. Rimjaem, “Study on Electron Beam Transverse Emittance at the Linac-based THz Laboratory in Thailand”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3017-3019.
- A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2503-2506.
- R. Cai et al., “LHC crystal collimation tests with 6.8 Z TeV Pb beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM120, pp. 2503-2506.
- J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
- F. Cianciosi et al., “The Girders System for the New ESRF Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 147-151.
- C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
- T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
- N. N. Alexeev et al., “Development of MHF Conception at ITEP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 74-78.
- H. Lovelace III et al., “Injecting and Ramping Trapped Beam in Hadron Accelerator”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1304, this conference.
Back to search
