Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] O. B. Dzagurov and V. P. Petukhov, “Corona Triode without Anode Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A05, pp. 791-793.
[n] A. Romanov et al., “Commissioning of the IOTA proton injector”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR32, unpublished.
[n] M. Fouaidy, A. Caruette, T. Junquera, and Q. S. Shu, “Surface Scanning Thermometers for Diagnostic Purpose of the TESLA SRF Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F06, pp. 559-563.
[n] M. Cavenago, T. Kulevoy, and S. Petrenko, “Beams from RF Ovens and ECR Ion Sources”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT065, pp. 1303-1305.
[n] N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4368-4371. doi:10.18429/JACoW-IPAC2019-FRXXPLS1
[n] D. A. Liakin et al., “Current Status of the Advanced Residual Gas Monitor for Heavy Ion Synchrotron Applications”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT006, pp. XX-XX.
[n] M. Filippova et al., “Engineering Design and Fabrication of X-band RF Components”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC052, pp. 196-198.
[n] H. Guler et al., “XFEL Couplers RF Conditioning at LAL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2125-2127. doi:10.18429/JACoW-IPAC2016-WEPMB006
[n] S. M. Polozov, V. I. Rashchikov, and Ya. V. Shashkov, “Transverse Defocusing Study in LPWA Channel for Linear and Bubble Modes”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2224-2226. doi:10.18429/JACoW-IPAC2016-WEPMB049
[n] M. Krasilnikov et al., “RF Performance of a Next-Generation L-Band RF Gun at PITZ”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 699-702. doi:10.18429/JACoW-LINAC2022-THPOJO03
[n] B. Faatz et al., “Simultaneous Operation of a Multi Beamline FEL Facility”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD32, pp. 301-304.
[n] F. Roncarolo et al., “Beam Instrumentation for the CERN LINAC4 and PSB Half Sector Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 408-411. doi:10.18429/JACoW-IPAC2017-MOPAB120
[n] T. Giacomini, P. Forck, D. A. Liakin, and V. Skachkov, “Improving the Reliability of IPM”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT004, pp. XX-XX.
[n] H. Guler et al., “RF Conditioning of the XFEL Power Couplers at the Industrial Scale”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB102, pp. 1387-1389.
[n] B. Song and J. Wang, “Mathematical Modeling and Analysis of a Wide Bandwidth Bipolar Power Supply for the Fast Correctors in the APS Upgrade Controller”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3264-3266. doi:10.18429/JACoW-IPAC2015-WEPTY004
[n] Chengjie Chu, “PRELIMINARY STRUCTURE DESIGN OF THE MAIN MAGNET FOR THE 100MEV CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P15, pp. XX-XX.
[n] S. Bousson et al., “An Alternative Scheme for Stiffening SRF Cavities by Plasma Spraying”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP109, pp. 919-921.
[n] B. E. Norum, “Overview of cw Electron Accelerator Proposals”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3250-3252.
[n] M. Sessler, C. Turner, and S. Wurtele, “Control of Longitudinal Collective Behavior in the Muon Collider Rings”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W033, pp. 422-424.
[n] W. Decking, V. Balandin, N. Golubeva, and F. Obier, “Fast Distribution of Pulses in Multiple Beam Line Facilities”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOCI2, pp. 524-524.
[n] J. A. Uythoven et al., “Experience with the LHC Beam Dump Post-Operational Checks System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP029, pp. 1599-1601.
[n] M. Satoh et al., “Control System Status of SuperKEKB Injector Linac”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1522-1525. doi:10.18429/JACoW-ICALEPCS2017-THPHA064
[n] S. Burger, E. Bravin, G. Ferioli, G. J. Focker, A. Guerrero Ollacarizqueta, and R. Maccaferri, “A New TV Beam Observation System for CERN”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT030, pp. 214-216.
[n] G. M??ller, “Diagnostic Techniques and Defect Classification”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-22, pp. XX-XX.
[n] H. Gaiser, K. Kaspar, U. Ratzinger, S. Minaev, and B. Krietenstein, “Status of the 36 MHz Linac Cavities for the GSI High Current Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA70, pp. 3552-3554.
[n] D. H. H. Hoffmann et al., “Heavy Ion Beams for Intertial Confinement Fusion and Recent Experimental Results”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 191-196.
[n] H. Heinrichs et al., “Activities on RF-Superconductivity at Wuppertal”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-8, pp. XX-XX.
[n] M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation of the LNL ECR Ion Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B12, pp. 2417-2419.
[n] D. Khan et al., “FFA@CEBAF beam transport error and tolerance simulation studies”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC84, unpublished.
[n] P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
[n] F. Marti, “STUDY OF SPACE CHARGE EFFECTS USING A SMALL STORAGE RING THAT WORKS IN THE ISOCHRONOUS REGIME”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 21A2, pp. XX-XX.
[n] T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 161-164. doi:10.18429/JACoW-IBIC2015-MOPB049
[n] N. Sakamoto, “CONSTRUCTION OF THE RF-RESONATORS FOR THE RIKEN SUPERCONDUCTING RING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P21, pp. XX-XX.
[n] B. Visentin et al., “Experimental Results on 700 MHz Multicell Superconducting Cavity for Proton Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB047, pp. 1303-1305.
[n] X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n] S. Kurashima, “DEVELOPMENT OF THE FLAT-TOP ACCELERATION SYSTEM FOR THE JAERI AVF CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P28, pp. XX-XX.
[n] M. E. Biagini et al., “PSPA, a Web Platform for Simulation of Particle Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3730-3733. doi:10.18429/JACoW-IPAC2017-THPAB019
For LaTeX
Use Complete Form
For BibTeX
References
- O. B. Dzagurov and V. P. Petukhov, “Corona Triode without Anode Power Supply”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A05, pp. 791-793.
- A. Romanov et al., “Commissioning of the IOTA proton injector”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR32, unpublished.
- M. Fouaidy, A. Caruette, T. Junquera, and Q. S. Shu, “Surface Scanning Thermometers for Diagnostic Purpose of the TESLA SRF Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F06, pp. 559-563.
- M. Cavenago, T. Kulevoy, and S. Petrenko, “Beams from RF Ovens and ECR Ion Sources”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT065, pp. 1303-1305.
- N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4368-4371.
- D. A. Liakin et al., “Current Status of the Advanced Residual Gas Monitor for Heavy Ion Synchrotron Applications”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT006, pp. XX-XX.
- M. Filippova et al., “Engineering Design and Fabrication of X-band RF Components”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC052, pp. 196-198.
- H. Guler et al., “XFEL Couplers RF Conditioning at LAL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2125-2127.
- S. M. Polozov, V. I. Rashchikov, and Ya. V. Shashkov, “Transverse Defocusing Study in LPWA Channel for Linear and Bubble Modes”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2224-2226.
- M. Krasilnikov et al., “RF Performance of a Next-Generation L-Band RF Gun at PITZ”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 699-702.
- B. Faatz et al., “Simultaneous Operation of a Multi Beamline FEL Facility”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD32, pp. 301-304.
- F. Roncarolo et al., “Beam Instrumentation for the CERN LINAC4 and PSB Half Sector Test”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 408-411.
- T. Giacomini, P. Forck, D. A. Liakin, and V. Skachkov, “Improving the Reliability of IPM”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT004, pp. XX-XX.
- H. Guler et al., “RF Conditioning of the XFEL Power Couplers at the Industrial Scale”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB102, pp. 1387-1389.
- B. Song and J. Wang, “Mathematical Modeling and Analysis of a Wide Bandwidth Bipolar Power Supply for the Fast Correctors in the APS Upgrade Controller”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3264-3266.
- Chengjie Chu, “PRELIMINARY STRUCTURE DESIGN OF THE MAIN MAGNET FOR THE 100MEV CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P15, pp. XX-XX.
- S. Bousson et al., “An Alternative Scheme for Stiffening SRF Cavities by Plasma Spraying”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP109, pp. 919-921.
- B. E. Norum, “Overview of cw Electron Accelerator Proposals”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3250-3252.
- M. Sessler, C. Turner, and S. Wurtele, “Control of Longitudinal Collective Behavior in the Muon Collider Rings”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W033, pp. 422-424.
- W. Decking, V. Balandin, N. Golubeva, and F. Obier, “Fast Distribution of Pulses in Multiple Beam Line Facilities”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOCI2, pp. 524-524.
- J. A. Uythoven et al., “Experience with the LHC Beam Dump Post-Operational Checks System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP029, pp. 1599-1601.
- M. Satoh et al., “Control System Status of SuperKEKB Injector Linac”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1522-1525.
- S. Burger, E. Bravin, G. Ferioli, G. J. Focker, A. Guerrero Ollacarizqueta, and R. Maccaferri, “A New TV Beam Observation System for CERN”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT030, pp. 214-216.
- G. M??ller, “Diagnostic Techniques and Defect Classification”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-22, pp. XX-XX.
- H. Gaiser, K. Kaspar, U. Ratzinger, S. Minaev, and B. Krietenstein, “Status of the 36 MHz Linac Cavities for the GSI High Current Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA70, pp. 3552-3554.
- D. H. H. Hoffmann et al., “Heavy Ion Beams for Intertial Confinement Fusion and Recent Experimental Results”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 191-196.
- H. Heinrichs et al., “Activities on RF-Superconductivity at Wuppertal”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-8, pp. XX-XX.
- M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation of the LNL ECR Ion Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B12, pp. 2417-2419.
- D. Khan et al., “FFA@CEBAF beam transport error and tolerance simulation studies”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC84, unpublished.
- P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
- F. Marti, “STUDY OF SPACE CHARGE EFFECTS USING A SMALL STORAGE RING THAT WORKS IN THE ISOCHRONOUS REGIME”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 21A2, pp. XX-XX.
- T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 161-164.
- N. Sakamoto, “CONSTRUCTION OF THE RF-RESONATORS FOR THE RIKEN SUPERCONDUCTING RING CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P21, pp. XX-XX.
- B. Visentin et al., “Experimental Results on 700 MHz Multicell Superconducting Cavity for Proton Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB047, pp. 1303-1305.
- X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 165-168.
- S. Kurashima, “DEVELOPMENT OF THE FLAT-TOP ACCELERATION SYSTEM FOR THE JAERI AVF CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P28, pp. XX-XX.
- M. E. Biagini et al., “PSPA, a Web Platform for Simulation of Particle Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3730-3733.
Back to search