Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. K. Wu, “Light Source and Accelerator Physics Research Program at Duke University”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1866-1868. doi:10.18429/JACoW-IPAC2015-TUPMA016
[n] A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 99-101. doi:10.18429/JACoW-MEDSI2016-MOPE41
[n] H. Hsieh et al., “Superconducting Magnet Program for X-Ray Lithography Source at Brookhaven National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2248-2251.
[n] G. Benedetti, J. Campmany, and Z. Mart?¡, “Low Horizontal Beta Optics for ALBA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3461-3463. doi:10.18429/JACoW-IPAC2016-THPMR035
[n] M. Pavlovic and I. Strasik, “Beam Transport with Scattering Using SRIM Supporting Software Routines Code”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP102, pp. 1767-1769.
[n] B. Kostka, R. Rossmanith, A. Bernhard, U. Schindler, and E. Steffens, “Superconductive Undulators with Variable Polarization Direction”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM103, pp. XX-XX.
[n] J. B. Murphy, “X-Ray Lithography Sources: A Review”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 757-761.
[n] S. F. Mikhailov, H. Hao, V. Popov, and Y. K. Wu, “Developing an Improved Pulsed Mode Operation for Duke Storage Ring Based FEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1860-1862. doi:10.18429/JACoW-IPAC2015-TUPMA012
[n] A. Matheisen, B. van der Horst, B. Petersen, S. S?ñgebarth, and P. Schilling, “Preparation Sequences for Electro-Polished High Gradient Multi-Cell Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP08, pp. 470-472.
[n] S. Huang, B. Jia, J. Y. Li, and Y. K. Wu, “Calibration of Spectrometers with Undulator Radiation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP152, pp. 2402-2404.
[n] C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-MEDSI2016-MOPE01
[n] M. Ferrater et al., “Experimental and Numerical Study of the ALBA LINAC Cooling System”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 102-104. doi:10.18429/JACoW-MEDSI2016-MOPE42
[n] N. Steinhau-Kuehl, R. Bandelmann, D. Kostin, A. Matheisen, M. Schmoekel, and J. K. Sekutowicz, “Vertical Electro-Polishing at DESY of a 1.3 GHz Gun Cavity for CW Application”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB103, pp. 399-403.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. K. Wu, “Light Source and Accelerator Physics Research Program at Duke University”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1866-1868.
- A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 99-101.
- H. Hsieh et al., “Superconducting Magnet Program for X-Ray Lithography Source at Brookhaven National Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2248-2251.
- G. Benedetti, J. Campmany, and Z. Mart?¡, “Low Horizontal Beta Optics for ALBA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3461-3463.
- M. Pavlovic and I. Strasik, “Beam Transport with Scattering Using SRIM Supporting Software Routines Code”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP102, pp. 1767-1769.
- B. Kostka, R. Rossmanith, A. Bernhard, U. Schindler, and E. Steffens, “Superconductive Undulators with Variable Polarization Direction”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM103, pp. XX-XX.
- J. B. Murphy, “X-Ray Lithography Sources: A Review”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 757-761.
- S. F. Mikhailov, H. Hao, V. Popov, and Y. K. Wu, “Developing an Improved Pulsed Mode Operation for Duke Storage Ring Based FEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1860-1862.
- A. Matheisen, B. van der Horst, B. Petersen, S. S?ñgebarth, and P. Schilling, “Preparation Sequences for Electro-Polished High Gradient Multi-Cell Cavities at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP08, pp. 470-472.
- S. Huang, B. Jia, J. Y. Li, and Y. K. Wu, “Calibration of Spectrometers with Undulator Radiation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP152, pp. 2402-2404.
- C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. XX-XX.
- M. Ferrater et al., “Experimental and Numerical Study of the ALBA LINAC Cooling System”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 102-104.
- N. Steinhau-Kuehl, R. Bandelmann, D. Kostin, A. Matheisen, M. Schmoekel, and J. K. Sekutowicz, “Vertical Electro-Polishing at DESY of a 1.3 GHz Gun Cavity for CW Application”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB103, pp. 399-403.
Back to search