Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Deniau et al., “Upgrade of MAD-X for HL-LHC Project and FCC Studies”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 165-171. doi:10.18429/JACoW-ICAP2018-TUPAF01
[n] D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 326-329. doi:10.18429/JACoW-NAPAC2016-TUPOA19
[n] A. F. D. Morgan and G. Rehm, “Considerations and Improved Workflow for Simulation of Dissipated Power from Wake Losses”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 202-205. doi:10.18429/JACoW-IBIC2015-MOPB065
[n] R. P. Fliller et al., “The Two Stage Crystal Collimator for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH082, pp. 1399-1401.
[n] F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
[n] E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4399-4402. doi:10.18429/JACoW-IPAC2017-THPIK126
[n] J. Bosser et al., “Electron Cooling with Neutralised Electron Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1211-1214.
[n] K. N. Nii et al., “Vertical Electro-Polishing of Nb Single-Cell Cavity Using Cathode with Variable-Geometry Wings and Its Results of Vertical Test”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP101, pp. 662-664.
[n] J. H. Kim et al., “Upgrade of Vacuum Control System for Komac Linac and Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1358-1360. doi:10.18429/JACoW-ICALEPCS2017-THPHA012
[n] C. P. Chu, F. Q. Guo, H. H. Lv, C. H. Wang, Z. Zhao, and G. Shen, “Accelerator Lattice and Model Services”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC152, pp. 464-466.
[n] Q. T. Zhao et al., “Beam Asymmetry Studies with Quadrupole Field Errors in the PITZ Gun Section”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 440-443. doi:10.18429/JACoW-FEL2017-WEP010
[n] M. A. Baylac, J.-M. De Conto, E. Froidefond, and E. Zh. Sargsyan, “Error study of LINAC 4”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBY03, pp. 137-139.
[n] E. Willen et al., “Performance Summary of the Helical Magnets for RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB006, pp. 164-166.
[n] N. Vitoratou, P. Karataev, and G. Rehm, “Beam Loss Monitors for Energy Measurements in Diamond Light Source”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 482-486. doi:10.18429/JACoW-IBIC2017-TH1AB3
[n] M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 435-438. doi:10.18429/JACoW-NAPAC2016-TUA3CO03
[n] R. J. Briggs, L. R. Reginato, and W. Waldron, “Helical Pulseline Structures for Ion Acceleration”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB005, pp. 440-442.
[n] J. Galambos, H. Hotchi, and A. C. Mezger, “Summary of the Commissioning, Operations and Performance Working Group of the HB-2010 Workshop”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper FROP04, pp. 703-705.
[n] R. Lange, L. R. Dalesio, and A. N. Johnson, “Adding Flexible Subscription Options to EPICS”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS020, pp. 827-829.
[n] I. C. Sheng, S. Sharma, R. Rotela, and J. Howell, “Thermomechanical Analysis of a Compact-Design High Heat Load Crotch Absorber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR08, pp. 816-818.
[n] W. Bartmann, M. Benedikt, E. M?®tral, D. M?Âhl, and S. Peggs, “Gamma Transition Jump for PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP089, pp. 3572-3574.
[n] A. N. Johnson, J. B. Anderson, M. A. Davidsaver, and R. Lange, “Not Dead Yet: Recent Enhancements and Future Plans for EPICS Version 3”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC148, pp. 457-459.
[n] N. Rider et al., “Bunch-By-Bunch Instrumentation Upgrades For CESR, Based On Requirements For The CESR Test Accelerator Research Program”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST02, pp. 88-90.
[n] Y. Hirao et al., “HIMAC Project at NIRS-Japan”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 280-283.
[n] V. Gorbunov, M. Gratchev, V. Seleznev, and V. Yabzhanov, “Status Report on the Control System for the MMF Experimental Area”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1148-1149.
[n] K. Alrutz-Ziemssen et al., “The Superconducting 130 MeV Recyclotron for Electrons at Darmstadt”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-30, pp. 512-514.
[n] P. Kolb et al., “1.3 GHz Cavity Test Program for ARIEL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB089, pp. 350-354.
[n] M. T. Crofford et al., “The Spallation Neutron Source Cryomodule Test Stand RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC140, pp. 1395-1397.
[n] G. A. Fatkin et al., “New VME-Based Hardware for Automation in BINP”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1294-1297. doi:10.18429/JACoW-ICALEPCS2017-THMPL10
[n] T. Kii et al., “A Study on Field Error of Bulk HTSC Staggered Array Undulator Originated from Variation of Critical Current Density of Bulk HTSCs”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC02, pp. 648-651.
[n] S. Tomin and G. Geloni, “Synchrotron Radiation Module in OCELOT Toolkit”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3127-3129. doi:10.18429/JACoW-IPAC2019-WEPTS017
[n] G. Y. Hsiung et al., “Operation Experiences of the SRRC 1.3 GeV Electron Storage Ring Vacuum System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2479-2482.
[n] P. Marchand, M. D. Diop, M. Luong, O. Piquet, F. Ribeiro, and R. S. Sreedharan, “Low Level RF System Development for SOLEIL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH186, pp. 1447-1449.
[n] S.-P. Kao, C. R. Chen, F.-Z. Hsiao, and J. P. Wang, “Safety Management for the Cryogenic System of Superconducting RF System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE002, pp. 832-834.
[n] C. Wang et al., “Successful Operation of the 500 MHz SRF Module at TLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT066, pp. 3706-3708.
[n] S. A. Antipov et al., “Single-Collimator Tune Shift Measurement of the Three-Stripe Collimator at the LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3036-3039. doi:10.18429/JACoW-IPAC2018-THPAF035
[n] J. Komppula, W. H?â, and K. S. B. Li, “Simulation Tools for the Design and Performance Evaluation of Transverse Feedback Systems”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1912-1915. doi:10.18429/JACoW-IPAC2017-TUPIK091
[n] H. W. Luo, C. H. Lee, T. Y. Chung, and C.-S. Hwang, “Properties of Synchrotron Radiation from Segmented Undulators based on a Wigner Distribution Function”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2933-2935. doi:10.18429/JACoW-IPAC2016-WEPOW042
[n] M. Peryt, R. Billen, M. Martin Marquez, and Z. Zaharieva, “Database and Interface Modifications: Change Management Without Affecting the Clients”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN010, pp. 106-109.
[n] D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
[n] D. Trbojevic et al., “Commissioning of RHIC at 100 GeV/Nucleon”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE062, pp. 380-382.
[n] A. Terebilo and T. Straumann, “Fast Global Orbit Feedback System in SPEAR3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH102, pp. 3035-3037.
[n] M. T. F. Pivi et al., “A New Chicane Experiment in PEP-II to Test Mitigations of the Electron Cloud Effect for Linear Colliders”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP063, pp. 688-690.
[n] X. Yin, S. Fu, and J. Peng, “Space-Charge Driven Emittance Coupling in CSNS Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP024, pp. 3245-3247.
[n] M. Scholz and B. Beutner, “Studies of the Transverse Beam Coupling in the European XFEL Injector”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 263-265. doi:10.18429/JACoW-FEL2017-TUP005
[n] T. C. Tseng et al., “Preliminary Active Vibration Elimination Study of the TPS Girder System”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 26-28. doi:10.18429/JACoW-MEDSI2016-MOPE11
[n] A. Meseck, M. Abo-Bakr, and B. C. Kuske, “Output Variability of the BESSY Soft X-ray FEL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF011, pp. 321-323.
[n] C. H. Boulware et al., “Latest Results at the Upgraded PITZ Facility”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THAAU05, pp. 481-484.
[n] L. Wang and T. O. Raubenheimer, “Multi-Objective Genetic Optimization for LCLS-II X-Ray FEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOOCNO02, pp. 12-16.
[n] D. Bishop et al., “ISAC Control System Update”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB34, pp. 235-237.
[n] W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
[n] T. Tajima et al., “LANSCE Vacuum System Improvements in the Last ~10 Years”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1375-1377. doi:10.18429/JACoW-IPAC2019-TUPMP056
[n] R. P. Johnson and F. Willeke, “TOM, A Program for Interactive Lattice Design”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1681-1684.
[n] F. Resmini, G. Bellomo, H. G. Blosser, E. M. Fabrici, and D. Johnson, “Design Characteristics of the K=800 Superconducting Cyclotron at M.S.U.”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-09, pp. 2078-2085.
[n] G. Hoffstaetter et al., “Challenges for Beams in an ERL Extension to CESR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC056, pp. 190-192.
[n] C. P. Stoll and F. Hug, “Beam Breakup Simulations for the Mainz Energy Recovering Superconducting Accelerator MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 135-138. doi:10.18429/JACoW-IPAC2019-MOPGW025
[n] M. Micheler et al., “Coherent Diffraction Radiation Longitudinal Beam Profile Monitor for CTF3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE071, pp. 1143-1145.
[n] T. Watanabe, N. Fukunishi, M. Kase, S. I. Inamori, and K. Kon, “HTc-SQUID Beam Current Monitor at the RIBF”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 590-594. doi:10.18429/JACoW-IBIC2015-WECLA03
[n] R. Hardekopf et al., “Fabrication of MEBT Chopper for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB018, pp. 1661-1663.
[n] R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 230-232. doi:10.18429/JACoW-MEDSI2016-TUPE29
For LaTeX
Use Complete Form
For BibTeX
References
- L. Deniau et al., “Upgrade of MAD-X for HL-LHC Project and FCC Studies”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 165-171.
- D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 326-329.
- A. F. D. Morgan and G. Rehm, “Considerations and Improved Workflow for Simulation of Dissipated Power from Wake Losses”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 202-205.
- R. P. Fliller et al., “The Two Stage Crystal Collimator for RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH082, pp. 1399-1401.
- F. Caspers, M. Morvillo, F. Ruggiero, J. Tan, and H. Tsutsui, “Surface Resistance Measurements of LHC Dipole Beam Screen Samples”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B11, pp. 376-378.
- E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4399-4402.
- J. Bosser et al., “Electron Cooling with Neutralised Electron Beams”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1211-1214.
- K. N. Nii et al., “Vertical Electro-Polishing of Nb Single-Cell Cavity Using Cathode with Variable-Geometry Wings and Its Results of Vertical Test”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP101, pp. 662-664.
- J. H. Kim et al., “Upgrade of Vacuum Control System for Komac Linac and Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1358-1360.
- C. P. Chu, F. Q. Guo, H. H. Lv, C. H. Wang, Z. Zhao, and G. Shen, “Accelerator Lattice and Model Services”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC152, pp. 464-466.
- Q. T. Zhao et al., “Beam Asymmetry Studies with Quadrupole Field Errors in the PITZ Gun Section”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 440-443.
- M. A. Baylac, J.-M. De Conto, E. Froidefond, and E. Zh. Sargsyan, “Error study of LINAC 4”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBY03, pp. 137-139.
- E. Willen et al., “Performance Summary of the Helical Magnets for RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAB006, pp. 164-166.
- N. Vitoratou, P. Karataev, and G. Rehm, “Beam Loss Monitors for Energy Measurements in Diamond Light Source”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 482-486.
- M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 435-438.
- R. J. Briggs, L. R. Reginato, and W. Waldron, “Helical Pulseline Structures for Ion Acceleration”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB005, pp. 440-442.
- J. Galambos, H. Hotchi, and A. C. Mezger, “Summary of the Commissioning, Operations and Performance Working Group of the HB-2010 Workshop”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper FROP04, pp. 703-705.
- R. Lange, L. R. Dalesio, and A. N. Johnson, “Adding Flexible Subscription Options to EPICS”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS020, pp. 827-829.
- I. C. Sheng, S. Sharma, R. Rotela, and J. Howell, “Thermomechanical Analysis of a Compact-Design High Heat Load Crotch Absorber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR08, pp. 816-818.
- W. Bartmann, M. Benedikt, E. M?®tral, D. M?Âhl, and S. Peggs, “Gamma Transition Jump for PS2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP089, pp. 3572-3574.
- A. N. Johnson, J. B. Anderson, M. A. Davidsaver, and R. Lange, “Not Dead Yet: Recent Enhancements and Future Plans for EPICS Version 3”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC148, pp. 457-459.
- N. Rider et al., “Bunch-By-Bunch Instrumentation Upgrades For CESR, Based On Requirements For The CESR Test Accelerator Research Program”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST02, pp. 88-90.
- Y. Hirao et al., “HIMAC Project at NIRS-Japan”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 280-283.
- V. Gorbunov, M. Gratchev, V. Seleznev, and V. Yabzhanov, “Status Report on the Control System for the MMF Experimental Area”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1148-1149.
- K. Alrutz-Ziemssen et al., “The Superconducting 130 MeV Recyclotron for Electrons at Darmstadt”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-30, pp. 512-514.
- P. Kolb et al., “1.3 GHz Cavity Test Program for ARIEL”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB089, pp. 350-354.
- M. T. Crofford et al., “The Spallation Neutron Source Cryomodule Test Stand RF System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC140, pp. 1395-1397.
- G. A. Fatkin et al., “New VME-Based Hardware for Automation in BINP”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1294-1297.
- T. Kii et al., “A Study on Field Error of Bulk HTSC Staggered Array Undulator Originated from Variation of Critical Current Density of Bulk HTSCs”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPC02, pp. 648-651.
- S. Tomin and G. Geloni, “Synchrotron Radiation Module in OCELOT Toolkit”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3127-3129.
- G. Y. Hsiung et al., “Operation Experiences of the SRRC 1.3 GeV Electron Storage Ring Vacuum System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2479-2482.
- P. Marchand, M. D. Diop, M. Luong, O. Piquet, F. Ribeiro, and R. S. Sreedharan, “Low Level RF System Development for SOLEIL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH186, pp. 1447-1449.
- S.-P. Kao, C. R. Chen, F.-Z. Hsiao, and J. P. Wang, “Safety Management for the Cryogenic System of Superconducting RF System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE002, pp. 832-834.
- C. Wang et al., “Successful Operation of the 500 MHz SRF Module at TLS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT066, pp. 3706-3708.
- S. A. Antipov et al., “Single-Collimator Tune Shift Measurement of the Three-Stripe Collimator at the LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3036-3039.
- J. Komppula, W. H?â, and K. S. B. Li, “Simulation Tools for the Design and Performance Evaluation of Transverse Feedback Systems”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1912-1915.
- H. W. Luo, C. H. Lee, T. Y. Chung, and C.-S. Hwang, “Properties of Synchrotron Radiation from Segmented Undulators based on a Wigner Distribution Function”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2933-2935.
- M. Peryt, R. Billen, M. Martin Marquez, and Z. Zaharieva, “Database and Interface Modifications: Change Management Without Affecting the Clients”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN010, pp. 106-109.
- D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
- D. Trbojevic et al., “Commissioning of RHIC at 100 GeV/Nucleon”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE062, pp. 380-382.
- A. Terebilo and T. Straumann, “Fast Global Orbit Feedback System in SPEAR3”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH102, pp. 3035-3037.
- M. T. F. Pivi et al., “A New Chicane Experiment in PEP-II to Test Mitigations of the Electron Cloud Effect for Linear Colliders”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP063, pp. 688-690.
- X. Yin, S. Fu, and J. Peng, “Space-Charge Driven Emittance Coupling in CSNS Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP024, pp. 3245-3247.
- M. Scholz and B. Beutner, “Studies of the Transverse Beam Coupling in the European XFEL Injector”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 263-265.
- T. C. Tseng et al., “Preliminary Active Vibration Elimination Study of the TPS Girder System”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 26-28.
- A. Meseck, M. Abo-Bakr, and B. C. Kuske, “Output Variability of the BESSY Soft X-ray FEL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF011, pp. 321-323.
- C. H. Boulware et al., “Latest Results at the Upgraded PITZ Facility”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THAAU05, pp. 481-484.
- L. Wang and T. O. Raubenheimer, “Multi-Objective Genetic Optimization for LCLS-II X-Ray FEL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOOCNO02, pp. 12-16.
- D. Bishop et al., “ISAC Control System Update”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB34, pp. 235-237.
- W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
- T. Tajima et al., “LANSCE Vacuum System Improvements in the Last ~10 Years”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1375-1377.
- R. P. Johnson and F. Willeke, “TOM, A Program for Interactive Lattice Design”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1681-1684.
- F. Resmini, G. Bellomo, H. G. Blosser, E. M. Fabrici, and D. Johnson, “Design Characteristics of the K=800 Superconducting Cyclotron at M.S.U.”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-09, pp. 2078-2085.
- G. Hoffstaetter et al., “Challenges for Beams in an ERL Extension to CESR”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC056, pp. 190-192.
- C. P. Stoll and F. Hug, “Beam Breakup Simulations for the Mainz Energy Recovering Superconducting Accelerator MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 135-138.
- M. Micheler et al., “Coherent Diffraction Radiation Longitudinal Beam Profile Monitor for CTF3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE071, pp. 1143-1145.
- T. Watanabe, N. Fukunishi, M. Kase, S. I. Inamori, and K. Kon, “HTc-SQUID Beam Current Monitor at the RIBF”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 590-594.
- R. Hardekopf et al., “Fabrication of MEBT Chopper for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB018, pp. 1661-1663.
- R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 230-232.
Back to search