JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. A. Pande, C. Christou, P. Gu, and G. Burt, “Modifications to the Pump Out Box to Lower the Qext of Diamond SCRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2251-2253. doi:10.18429/JACoW-IPAC2016-WEPMB060
[n]	J. L. Tom, “Modular Accelerator Design”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 872-876. 
[n]	J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607. 
[n]	A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, L. Faillace, B. Spataro, and A. Valloni, “Simulations for the High Gradient, Low Emittance Supergun RF Photoinjector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP140, pp. 391-393. 
[n]	M. Acar, J. Boerez, A. Herty, H. Mainaud Durand, A. Marin, and J.-P. Quesnel, “Remote Alignment of Low Beta Quadrupoles with Micrometric Resolution”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD020, pp. 1470-1472. 
[n]	T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1076-1079. 
[n]	R. Merl and T. Spickermann, “Use of a Reconfigurable VME Module To Measure Beam Energy at the Los Alamos Proton Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT019, pp. 1658-1660. 
[n]	T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753. 
[n]	T. Petersen et al., “Niobium-tin as a transformative technology for low-beta linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2709-2712. doi:10.18429/JACoW-IPAC2024-WEPS09
[n]	Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4098-4100. doi:10.18429/JACoW-IPAC2016-THPOY007
[n]	P. Gu, C. Christou, P. J. Marten, S. A. Pande, A. F. Rankin, and D. Spink, “Operation of Diamond Superconducting RF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 87-89. doi:10.18429/JACoW-SRF2017-MOPB016
[n]	P. F. Tavares, T. F. Günzel, and R. Nagaoka, “Collective Effects in the MAX IV 3 GeV Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS066, pp. 754-756. 
[n]	P. Gu et al., “Reliability Improvements of the Diamond Superconducting Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO068, pp. 267-270. 
[n]	M. Petrarca et al., “Status of the Sparc Photoinjector”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP038, pp. 333-335. 
[n]	J. Steinmann et al., “Ultralow-Alpha Operation with three Families of Sextupoles at the KARA Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5018, unpublished. 
[n]	T. Y. T. Kuo and J. S. Laughlin, “Initial Experience in Ion Production Using an Ultra-high Power Density Method”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-12, pp. 381-385. 
[n]	M. T. Heron, Y. S. Chernousko, P. Hamadyk, S. C. Lay, and N. Rotolo, “The Diamond Machine Protection System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU003, pp. 1051-1054. 
[n]	T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501. 
[n]	M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n]	G. O. Hendry, A. A. Fleischer, C. G. Smith, J. L. Tom, and D. K. Wells, “Design and Performance of a Compact Multi-particle Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F05, pp. XX-XX. 
[n]	A. Fukasawa et al., “SW/TW Hybrid Photoinjector and its Application to the Coherent THz Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC021, pp. 1758-1760. 
[n]	M. Jensen et al., “First 18 Months Operation of the Diamond Storage Ring RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC025, pp. 2037-2039. 
[n]	J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 873-875. 
[n]	R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 59-63. doi:10.18429/JACoW-ICALEPCS2017-MOCPL03
[n]	J. Calvey et al., “Electron Cloud Mitigation Investigations at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MIT01, pp. 41-45. 
[n]	C. Christou et al., “Progress With the Diamond Light Source RF Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4358-4361. doi:10.18429/JACoW-IPAC2017-THPIK112
[n]	C. Christou et al., “A Hybrid Superconducting/Normal Conducting RF System for the Diamond Light Source Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2950-2952. doi:10.18429/JACoW-IPAC2016-WEPOW047
[n]	J. D. Fuerst, M. Kedzie, K. W. Shepard, and M. Kelly, “Cold Tests of a Superconducting Co-Axial Half-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP06, pp. 608-610. 
[n]	C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4042-4045. doi:10.18429/JACoW-IPAC2018-THPMF007
[n]	A. A. Fleischer, N. E. Jorgensen, R. F. Nissen, D. K. Wells, and F. C. Younger, “A 14 MeV Neutron Source Capable of Delivering a 1000 Rad Dose Uniformly Over a 6x6 - Foot Area”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 262-266. 
[n]	A. C. Araujo Martinez et al., “Fabrication of 1.3 GHz Nb cavities at RadiaBeam”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR88, unpublished. 
[n]	A. Herty et al., “HL-LHC Full Remote Alignment Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3716-3719. doi:10.18429/JACoW-IPAC2019-THPGW057
[n]	M. Jensen et al., “Operational Experience of Diamond`s Superconducting Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO019, pp. 228-230. 
[n]	A. Mostacci, D. Alesini, R. Da Re, L. Ficcadenti, L. Palumbo, and B. Spataro, “About Non Resonant Perturbation Field Measurement in Standing Wave Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP086, pp. 3407-3409. 
[n]	R. Kersevan and M. Ady, “Recent Developments of Monte-Carlo Codes Molflow+ and Synrad+”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1327-1330. doi:10.18429/JACoW-IPAC2019-TUPMP037
[n]	G. Niehues et al., “Measurements of CSR radiation at KARA using novel thin-film lithium niobate electro-optical sensors”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6050, unpublished. 
[n]	T. F. Günzel, “Longitudinal Beam Stability and Related Effects at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS064, pp. 748-750. 
[n]	M. Kelly, “Status of superconducting spoke cavity development”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE302, pp. XX-XX. 
[n]	M. Zampetakis, R. Calaga, B. E. Karlsen-Bæck, I. Karpov, and H. Timko, “Benchmarking the LHC impedance model through loss of Landau damping measurements and simulations”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 552-555. doi:10.18429/JACoW-IPAC2025-MOPM100
[n]	M. Quispe, J. Casas, C. Colldelram, G. Peña Calurano, M. Sanchez Hidalgo, and B. de Abreu Francisco, “Improving helium sustainability: current performance and upgrade of the ALBA helium liquefaction facility”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7086, unpublished. 
[n]	G. O. Hendry and J. L. Tom, “A Magnetic Extraction Channel for a 30 - Inch AVF Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 500-504. 
[n]	J. P. Edelen, R. D. Berry, A. Diego, D. I. Gavryushkin, J. Krasna, and A. Yu. Smirnov, “C-Band Low Level RF System Using COTS Components”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 789-791. doi:10.18429/JACoW-LINAC2022-THPOPA22
[n]	Y. S. Chernousko, P. Hamadyk, and M. T. Heron, “Review of the Diamond Light Source Timing System”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHB02, pp. 144-146. 
[n]	T. Y. T. Kuo and J. A. Nolen, “Deflector Development for the K1200 Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XC-08, pp. 596-601. 
[n]	F. Bosco et al., “Advanced studies for the dynamics of high brightness electron beams with the code MILES”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3574-3577. doi:10.18429/JACoW-IPAC2023-WEPL190
[n]	G. Cojocaru et al., “Electron Beam Applications in Chemical Processing”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P101, pp. 3854-3856. 
[n]	F. Donoso et al., “Inovesalib: A Modular Vlasov-Fokker-Planck Solver Framework”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6163, unpublished. 
[n]	A. Borglund, F. Dos Santos Pedrosa, J.-P. Tock, and M. Bernardini, “PLAN analytics for enhanced understanding of RUN3 and LS3 activities at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3857-3860. doi:10.18429/JACoW-IPAC2024-THPS52
[n]	P. Gu et al., “Management for the Long-Term Reliability of the Diamond Superconducting RF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP059, pp. 255-258. 
[n]	F. Z. Chen et al., “SXFEL Linac BPM System Development and Performance Evaluation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4794-4796. doi:10.18429/JACoW-IPAC2018-THPML067
[n]	F. Zimmermann et al., “FCC-ee Overview”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H1, pp. 6-15. 
[n]	D. K. Wells, “A Small Cold-Cathode" High- Intensity Cyclotron Ion Source"”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 70-72. 
[n]	M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n]	R. Boni et al., “Status of the C-Band RF System for the SPARC-LAB High Brightness Photoinjector”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB080, pp. 360-362. 
[n]	F. Donoso et al., “Providing reproducibility and accessibility of research software development for accelerator physics at KARA”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6164, unpublished. 
[n]	F. P?®rez, T. F. G??nzel, and A. Olmos, “BPM Design for the ALBA Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH078, pp. 1190-1192. 
[n]	C. Christou et al., “Implications of Increased Beam Current for the Diamond Storage Ring RF System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP003, pp. 73-76. 
[n]	J. Kemppinen, H. M. Durand, and A. Herty, “Improving High Precision Cam MoverÔÇÖs Stiffness”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3713-3715. doi:10.18429/JACoW-IPAC2019-THPGW055
[n]	M. T. Heron et al., “Progress on the Implementation of the Diamond Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_018. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search