Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882.
[n] F. P?®rez, I. Birkel, K. Hertkorn, E. Huttel, A.-S. M??ller, and M. Pont, “Studies using Beam Loss Monitors at ANKA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF023, pp. 2314-2316.
[n] Y. Kang and A. Nassiri, “Waveguide Harmonic Damper for Klystron Amplifier”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4069, pp. 555-557.
[n] D. B. Bazyl, H. De Gersem, J. Enders, W. F. O. M??ller, and S. Weih, “Design of a Multi-Cell SRF Reduced-Beta Cavity for the Acceleration of Low Energy Electron Beams”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 603-605. doi:10.18429/JACoW-FEL2019-THP008
[n] P. Gurd, G. Lawson, D. H. Thompson, and E. Williams, “The Application of Linux Soft IOCs for Status Summaries at the Spallation Neutron Source”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_102.
[n] J. G. Alessi and K. Prelec, “Isotope and Cs Vapor Effects in an H- Volume Source with a Toroidal Chamber”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 656-659.
[n] T. F. Günzel, “Coherent and Incoherent Tune Shifts Deduced from Impedance Modelling in the ESRF-Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT083, pp. 2047-2049.
[n] R. Veness et al., “Design of a Prototype Gas Jet Profile Monitor for Installation Into the Large Hadron Collider at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 363-366. doi:10.18429/JACoW-IPAC2022-MOPOPT048
[n] C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 413-419. doi:10.18429/JACoW-MEDSI2016-FRBA02
[n] R. W. Fast and M. A. Otavka, “Liquid Deuterium Neutron Attenuator for Broad-Band Photon Beam Facility”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1201-1204.
[n] J. B. Gonz?â et al., “NCD-SWEET Beamline Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 374-376. doi:10.18429/JACoW-MEDSI2018-THPH17
[n] Y. Kobayashi et al., “Recent Progress of the Operation at PF-Ring and PF-AR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP031, pp. 1165-1167.
[n] A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 99-101. doi:10.18429/JACoW-MEDSI2016-MOPE41
[n] T. F. Godlove and W. L. Bendel, “Uniform - Field Wedge Magnets: Design”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 383-385.
[n] Z. Zhang, D. Z. Chen, D. Li, M. R. Pan, and C. Zuo, “3D Numerical Simulation of Extraction of a Large-power Negative Ion Source”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 103-105. doi:10.18429/JACoW-ICAP2015-WEP20
[n] C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-MEDSI2016-MOPE01
[n] C. M. Celata, F. M. Bieniosek, A. Friedman, D. P. Grote, L. R. Prost, and P. A. Seidl, “The Dynamic Aperture of an Electrostatic Quadrupole Lattice”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT026, pp. 1946-1948.
[n] L. R. M. Rib?â et al., “Mechanical Design of MIRAS, Infrared Microspectroscopy Beam Line at ALBA Synchrotron”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 403-408. doi:10.18429/JACoW-MEDSI2016-FRAA03
[n] K. J. Gajewski and K. Fransson, “EPICS at FREIA Laboratory”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 718-722. doi:10.18429/JACoW-ICALEPCS2023-TUPDP085
[n] W. H. Tan, A. Dhar, J. Hernandez, and E. Nanni, “Compressed ultrashort pulse injector demonstrator”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS130, unpublished.
[n] H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 245-248. doi:10.18429/JACoW-SRF2017-MOPB078
[n] J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 461-465.
[n] P. Kumar, V. Samulyak, and K. Yu, “Influence of Ionization and Beam Quality on Interaction of Tw-Peak Co2 Laser With Hydrogen Plasma”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1560-1563. doi:10.18429/JACoW-IPAC2018-TUPML015
[n] R. W. Moses, R. S. Christian, A. J. Dragt, and E. A. Heighway, “Scaling Laws for Abberations in Magnetic Quadrupole Lens Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1764-1767.
[n] T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
[n] G. J. Waldschmidt and A. Nassiri, “A Coaxial Subharmonic Cavity Design for Direct Injection at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT037, pp. 2497-2499.
[n] A. Hershcovitch, V. Kovarik, and K. Prelec, “Extraction of a Steady State Electron Beam from HCD Plasmas for EBIS Applications”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 585-587.
[n] G. A. Westenskow, F. M. Bieniosek, D. P. Grote, E. F. Halaxa, and J. W. Kwan, “A Compact High-Brightness Heavy-Ion Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE011, pp. 1263-1265.
[n] K. Vijayan, M. T. Heron, and S. J. Singleton, “Diamond Light Source Control Systems Relational RDB”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD52, pp. 87-89.
[n] T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
[n] W. L. Bendel and T. F. Godlove, “Uniform - Field Wedge Magnets: Results”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 385-387.
[n] A. Olmos, F. P?®rez, and G. Rehm, “Matlab Code for BPM Button Geometry Computation”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC19, pp. 186-188.
[n] M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-MEDSI2016-TUPE11
[n] S. Sierra, C. Lievin, P. Rouillon, H. Guler, W. Kaabi, and A. Verguet, “Automatic RF Conditioning Test Bench of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB095, pp. 1367-1369.
[n] E. Noah, F. Gerigk, J. Lettry, M. Lindroos, and T. Stora, “EURISOL 100 kW Target Stations Operation and Implications for its Proton Driver Beam”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS129, pp. 1807-1809.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882.
- F. P?®rez, I. Birkel, K. Hertkorn, E. Huttel, A.-S. M??ller, and M. Pont, “Studies using Beam Loss Monitors at ANKA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF023, pp. 2314-2316.
- Y. Kang and A. Nassiri, “Waveguide Harmonic Damper for Klystron Amplifier”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4069, pp. 555-557.
- D. B. Bazyl, H. De Gersem, J. Enders, W. F. O. M??ller, and S. Weih, “Design of a Multi-Cell SRF Reduced-Beta Cavity for the Acceleration of Low Energy Electron Beams”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 603-605.
- P. Gurd, G. Lawson, D. H. Thompson, and E. Williams, “The Application of Linux Soft IOCs for Status Summaries at the Spallation Neutron Source”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_102.
- J. G. Alessi and K. Prelec, “Isotope and Cs Vapor Effects in an H- Volume Source with a Toroidal Chamber”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 656-659.
- T. F. Günzel, “Coherent and Incoherent Tune Shifts Deduced from Impedance Modelling in the ESRF-Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT083, pp. 2047-2049.
- R. Veness et al., “Design of a Prototype Gas Jet Profile Monitor for Installation Into the Large Hadron Collider at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 363-366.
- C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 413-419.
- R. W. Fast and M. A. Otavka, “Liquid Deuterium Neutron Attenuator for Broad-Band Photon Beam Facility”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1201-1204.
- J. B. Gonz?â et al., “NCD-SWEET Beamline Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 374-376.
- Y. Kobayashi et al., “Recent Progress of the Operation at PF-Ring and PF-AR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP031, pp. 1165-1167.
- A. Carballedo et al., “Design and Construction of a PW Experimental System of HV Chamber Adaptable, Modular and Stable”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 99-101.
- T. F. Godlove and W. L. Bendel, “Uniform - Field Wedge Magnets: Design”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 383-385.
- Z. Zhang, D. Z. Chen, D. Li, M. R. Pan, and C. Zuo, “3D Numerical Simulation of Extraction of a Large-power Negative Ion Source”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 103-105.
- C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. XX-XX.
- C. M. Celata, F. M. Bieniosek, A. Friedman, D. P. Grote, L. R. Prost, and P. A. Seidl, “The Dynamic Aperture of an Electrostatic Quadrupole Lattice”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT026, pp. 1946-1948.
- L. R. M. Rib?â et al., “Mechanical Design of MIRAS, Infrared Microspectroscopy Beam Line at ALBA Synchrotron”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 403-408.
- K. J. Gajewski and K. Fransson, “EPICS at FREIA Laboratory”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP085, pp. 718-722.
- W. H. Tan, A. Dhar, J. Hernandez, and E. Nanni, “Compressed ultrashort pulse injector demonstrator”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS130, this conference.
- H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 245-248.
- J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 461-465.
- P. Kumar, V. Samulyak, and K. Yu, “Influence of Ionization and Beam Quality on Interaction of Tw-Peak Co2 Laser With Hydrogen Plasma”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1560-1563.
- R. W. Moses, R. S. Christian, A. J. Dragt, and E. A. Heighway, “Scaling Laws for Abberations in Magnetic Quadrupole Lens Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1764-1767.
- T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
- G. J. Waldschmidt and A. Nassiri, “A Coaxial Subharmonic Cavity Design for Direct Injection at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT037, pp. 2497-2499.
- A. Hershcovitch, V. Kovarik, and K. Prelec, “Extraction of a Steady State Electron Beam from HCD Plasmas for EBIS Applications”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 585-587.
- G. A. Westenskow, F. M. Bieniosek, D. P. Grote, E. F. Halaxa, and J. W. Kwan, “A Compact High-Brightness Heavy-Ion Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE011, pp. 1263-1265.
- K. Vijayan, M. T. Heron, and S. J. Singleton, “Diamond Light Source Control Systems Relational RDB”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD52, pp. 87-89.
- T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501.
- W. L. Bendel and T. F. Godlove, “Uniform - Field Wedge Magnets: Results”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 385-387.
- A. Olmos, F. P?®rez, and G. Rehm, “Matlab Code for BPM Button Geometry Computation”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC19, pp. 186-188.
- M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- S. Sierra, C. Lievin, P. Rouillon, H. Guler, W. Kaabi, and A. Verguet, “Automatic RF Conditioning Test Bench of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB095, pp. 1367-1369.
- E. Noah, F. Gerigk, J. Lettry, M. Lindroos, and T. Stora, “EURISOL 100 kW Target Stations Operation and Implications for its Proton Driver Beam”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS129, pp. 1807-1809.
Back to search
