JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. G. Vaccaro et al., “Aclip: A 3 Ghz Side Coupled Linac For Protontherapy To Be Used As A Booster For  30 Mev Cyclotrons”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 172-176. 
[n]	A. F. Zeller, J. C. DeKamp, M. J. Dubois, J. A. Nolen, and R. T. Swanson, “Design and Construction of a Low Current, Cryogenically Efficient Beam Line Quadrupole”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B16, pp. 79-81. 
[n]	C. Steier, D. S. Robin, Y. Wu, W. Decking, J. Laskar, and L. Nadolski, “Understanding the Dynamic Momentum Aperture of the Advanced Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB003, pp. 434-436. 
[n]	H. Ao, D. Luo, F. Marti, K. Saito, and S. Shanab, “Polarity Check of the FRIB Cryomodule Solenoids by Measuring Leakage Magnetic Field”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 821-823. doi:10.18429/JACoW-LINAC2016-THPRC024
[n]	L. Hagge, J. A. Dammann, J. Iversen, J. Kreutzkamp, and W. Singer, “Towards PLM-based Quality Assurance in the Fabrication of the Superconducting Cavities for the European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC006, pp. 2899-2901. 
[n]	C. Garion and H. Kos, “Design of the CLIC Quadrupole Vacuum Chambers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP007, pp. 363-365. 
[n]	T. Suzuki et al., “Present Status of a Multi-Bunch Electron Beam Linac Based on Cs-Te Photo-Cathode RF-Gun at Waseda University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP102, pp. 608-610. 
[n]	M. Ono et al., “Achievement of 40 MV/m Accelerating Field in L- Band SCC at KEK”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C08, pp. 472-484. 
[n]	G. Burtin et al., “Mechanical Design, Signal Processing and Operator Interface of the LEP Beam Current Transformers”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 794-797. 
[n]	M. Pekeler et al., “Performance of a Prototype 176 MHz Beta=0.09 Half-Wave Resonator for the SARAF Linac”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP39, pp. 331-333. 
[n]	Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, H. S. Song, and S. D. Yang, “Deep Learning Based Predictive Control for RFT-30 Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2230-2232. doi:10.18429/JACoW-IPAC2018-WEPAL030
[n]	W. Lawson et al., “Amplification Studies of a Multi-Megawatt Two-Cavity X-Band Gyroklystron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 658-661. 
[n]	A. M. Boyarski, A. S. King, M. J. Lee, J. R. Rees, and N. Spencer, “Automatic Control Program for SPEAR”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 580-584. 
[n]	M. Arruat, S. Jackson, J-L. Nougaret, and M. Peryt, “Equipment Software Modelling for Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_001. 
[n]	D. P. Jarosz, N. D. Arnold, J. Carwardine, G. Decker, N. Schwarz, and S. Veseli, “The Evolution of Component Database for APS Upgrade”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 192-194. doi:10.18429/JACoW-ICALEPCS2017-TUBPA01
[n]	Y. J. Bi et al., “Towards Quantitative Predictions of High Power Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP045, pp. 144-146. 
[n]	J. Frisch, E. Doyle, and K. Skarpaas VIII, “Advanced Collimator Engineering for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH012, pp. 1258-1260. 
[n]	A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172. 
[n]	L. R. Elias, “John Madey: A Short History of My Friend and Colleague”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 1-4. doi:10.18429/JACoW-FEL2017-MOA01
[n]	Y. Yamamoto et al., “Cavity diagnostic system for the vertical test of the baseline SC cavity in KEK-STF”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP13, pp. XX-XX. 
[n]	P. Gladkikh, I. Karnaukhov, A. Mytsykov, and A. Shcherbakov, “The Injection System for the ISI-800 Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP086G, pp. 2450-2452. 
[n]	Z. Chen et al., “Mechanical Design and Fabrication of a New RF Power Amplifier for LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP133, pp. 1085-1087. 
[n]	H. Kamitsubo, “Invited Paper: The RIKEN Linear Accelerator - Cyclotron System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F03, pp. 257-262. 
[n]	C. G. Pang, P. Bambade, Y. Funakoshi, and S. Uehara, “Simulation Study on Luminosity Feedback for Horizontal Beam Stabilization at Superkekb”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2250-2253. doi:10.18429/JACoW-IPAC2018-WEPAL037
[n]	J. Crisp and J. Satti, “Fermilab Linac Upgrade Side Coupled Cavity Temperature Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3189-3192. 
[n]	L. J. Mao, J. Dietrich, V. Kamerdzhiev, B. Lorentz, and H.-J. Stein, “Closed Orbit Correction in 2 MeV Electron Cooler Section at COSY-Juelich”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS03, pp. 92-94. 
[n]	H. Bongers et al., “The REX-ISOLDE Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01A, pp. 728-730. 
[n]	B. Cheo, R. Jones, and J. Shmoys, “Input Admittance Matrix of Multiport Driven DTL”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-52, pp. 176-178. 
[n]	Y. Fujita et al., “First Observation of Micro-Bunch Structure of the 100 MHz HIMAC-Injector Linac Beam by a Thin SEEM”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP32F, pp. 1503-1505. 
[n]	G. W. Kowalski, “Standarized Approach for Automatic Measurement and Application of Local  Feed-Forward Correction for Insertion Devices”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOSH3002, pp. XX-XX. 
[n]	W. Hartmann et al., “Source of Polarized Electrons”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1335-1337. 
[n]	K. N. Sjobak, H. Burkhardt, R. De Maria, and V. K. B. Olsen, “Generalised Scattering Module in SixTrack 5”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3156-3159. doi:10.18429/JACoW-IPAC2019-WEPTS026
[n]	S. W. Wang, J. Y. Li, Y. G. Wang, W. Xu, and K. Xuan, “Optimization of a Low-Alpha Lattice for the HLS-II Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3360-3362. doi:10.18429/JACoW-IPAC2019-WEPTS103
[n]	S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552. 
[n]	M. E. Hill, D. Whittum, and F. Zimmermann, “New Concepts for a Compact 5 TeV Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP22G, pp. 865-870. 
[n]	L. Popielarski et al., “SRF Highbay Technical Infrastructure for FRIB Production at Michigan State University”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP046, pp. 954-956. 
[n]	M. Sapinski et al., “Requirements of CLIC Beam Loss Monitoring System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB074, pp. 2869-2871. 
[n]	P. J. S. Barratt, A. P. Letchford, M. Perkins, and R. Sidlow, “A New Remote Control and Monitoring System for the ISIS Ion Source on the 665 kV DC Accelerating Platform”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP081L, pp. 1806-1808. 
[n]	S. Gustafsson, “A Superconducting Electromagnetic Channel for AGOR”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-07, pp. 354-357. 
[n]	E. Bulyak et al., “Present Status and Future Plans for Synchrotron Light Source ISI-800”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP075G, pp. 658-660. 
[n]	A. W. Molvik, W. R. Meier, A. Faltens, L. Reginato, and C. Smith, “Induction Core Performance”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4106, pp. 320-322. 
[n]	M. Watanabe et al., “Operation of Kicker System using Thyratron of the 3 GeV Rapid Cycling Synchrotron of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD086, pp. 3296-3298. 
[n]	J. C. Amato, D. Coulombe, J. L. Kirchgessner, and R. M. Sundelin, “Azimuthal Shaping of Cylindrical Accelerating Cavities for Improved Higher Order Mode Extraction”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3593-3596. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search