Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. S. Zisman, R. B. Yourd, and H. Hsieh, “Design of the PEP-II Low-Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA05, pp. 533-535.
[n] A. Waitz and A. Donaldson, “An Isolated Data Acquisition System for High Voltage Applications”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2056-2059.
[n] A. Peters, P. Forck, A. Weiss, and A. Bank Gesellschaft f??r Schwerionenforschung, “Transverse Beam Profile Measurements Using Optical Methods”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS09, pp. XX-XX.
[n] M. Dehghan, F. Abbasi, H. Azizi, F. Ghasemi, and A. Taghibi Khotbeh-Sara, “Basic Design of the RF Power System for IRANCYC-10 Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1972-1974. doi:10.18429/JACoW-IPAC2019-TUPTS021
[n] S. Konjeti et al., “Mechanical Stability of Open-type Quadrupole Magnets for a 2.5 GeV SRS (Indus-2)”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA014, pp. 646-648.
[n] J. Hussain, V. Gupta, and G. Mishra, “Harmonic Undulator Radiation and FEL Gain with Two-Peak Electron Beam Energy Distribution”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC17, pp. 75-78.
[n] W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WECD2, unpublished.
[n] D. Raparia, L. W. Funk, F. W. Guy, and G. T. Leifeste, “SSC Drift-Tube Linac Design”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-55, pp. 199-201.
[n] J.-Y. Choi, H. S. Kang, G. N. Kim, M. H. Cho, I. S. Ko, and W. Namkung, “100-MeV Electron Linac for Neutron Beam Facility at PAL”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D013, pp. 107-109.
[n] R. L. Gluckstern and I. Gjaja, “Longitudinal Coupling Impedance of a Cavity”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3387-3390.
[n] P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3195-3197. doi:10.18429/JACoW-IPAC2016-THOBB02
[n] A. Lasheen, H. Damerau, A. Huschauer, and B. K. Popovic, “Longitudinal Microwave Instability Study at Transition Crossing with Ion Beams in the CERN PS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3197-3200. doi:10.18429/JACoW-IPAC2021-WEPAB243
[n] M. F. Vorogushin et al., “LINEAR ELECTRON ACCELERATORS FOR RADIATION PROCESSING. CURRENT STATUS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THJO04, pp. XX-XX.
[n] H. Schönauer, M. Benedikt, P. Bryant, and M. Regler, “New Layout of the Rings for the 0.5 MW / 10 Hz /50 Hz AUSTRON Spallation Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH023, pp. 3275-3277.
[n] R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3093-3096.
[n] Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
[n] D. Kumar, G. G. Ga, M. Plesko, R. Huhmann, and S. Krepp, “Implementation of the Distributed Alarm System for the Particle Accelerator FAIR Using an Actor Concurrent Programming Model and the Concept of an Agent”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO029, pp. 102-104.
[n] J. Bernardini et al., “Final Design of the Pre-Production SSR2 Cryomodule for PIP-II Project at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 511-514. doi:10.18429/JACoW-LINAC2022-TUPOGE12
[n] A. I. Warwick, O. Fredriksson, and D. Vanecek, “A Four-Beam Cesium Injector for MBE-4”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3196-3199.
[n] F. Marti, H. G. Blosser, D. Johnson, and B. Milton, “Modifications to the Injection System of the K800 Superconducting Cyclotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2105-2108.
[n] I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834.
[n] A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
For LaTeX
Use Complete Form
For BibTeX
References
- M. S. Zisman, R. B. Yourd, and H. Hsieh, “Design of the PEP-II Low-Energy Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA05, pp. 533-535.
- A. Waitz and A. Donaldson, “An Isolated Data Acquisition System for High Voltage Applications”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2056-2059.
- A. Peters, P. Forck, A. Weiss, and A. Bank Gesellschaft f??r Schwerionenforschung, “Transverse Beam Profile Measurements Using Optical Methods”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS09, pp. XX-XX.
- M. Dehghan, F. Abbasi, H. Azizi, F. Ghasemi, and A. Taghibi Khotbeh-Sara, “Basic Design of the RF Power System for IRANCYC-10 Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1972-1974.
- S. Konjeti et al., “Mechanical Stability of Open-type Quadrupole Magnets for a 2.5 GeV SRS (Indus-2)”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA014, pp. 646-648.
- J. Hussain, V. Gupta, and G. Mishra, “Harmonic Undulator Radiation and FEL Gain with Two-Peak Electron Beam Energy Distribution”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC17, pp. 75-78.
- W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WECD2, unpublished.
- D. Raparia, L. W. Funk, F. W. Guy, and G. T. Leifeste, “SSC Drift-Tube Linac Design”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-55, pp. 199-201.
- J.-Y. Choi, H. S. Kang, G. N. Kim, M. H. Cho, I. S. Ko, and W. Namkung, “100-MeV Electron Linac for Neutron Beam Facility at PAL”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D013, pp. 107-109.
- R. L. Gluckstern and I. Gjaja, “Longitudinal Coupling Impedance of a Cavity”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3387-3390.
- P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3195-3197.
- A. Lasheen, H. Damerau, A. Huschauer, and B. K. Popovic, “Longitudinal Microwave Instability Study at Transition Crossing with Ion Beams in the CERN PS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3197-3200.
- M. F. Vorogushin et al., “LINEAR ELECTRON ACCELERATORS FOR RADIATION PROCESSING. CURRENT STATUS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THJO04, pp. XX-XX.
- H. Schönauer, M. Benedikt, P. Bryant, and M. Regler, “New Layout of the Rings for the 0.5 MW / 10 Hz /50 Hz AUSTRON Spallation Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH023, pp. 3275-3277.
- R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3093-3096.
- Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
- D. Kumar, G. G. Ga, M. Plesko, R. Huhmann, and S. Krepp, “Implementation of the Distributed Alarm System for the Particle Accelerator FAIR Using an Actor Concurrent Programming Model and the Concept of an Agent”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO029, pp. 102-104.
- J. Bernardini et al., “Final Design of the Pre-Production SSR2 Cryomodule for PIP-II Project at Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 511-514.
- A. I. Warwick, O. Fredriksson, and D. Vanecek, “A Four-Beam Cesium Injector for MBE-4”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3196-3199.
- F. Marti, H. G. Blosser, D. Johnson, and B. Milton, “Modifications to the Injection System of the K800 Superconducting Cyclotron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2105-2108.
- I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834.
- A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
Back to search