Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Christie, L. Corner, J. Henderson, and E. Snedden, “Developing a two-colour all-fibre balanced optical cross-correlator for sub-femtosecond synchronisation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4135-4138. doi:10.18429/JACoW-IPAC2023-THPA073
[n] M. Niccolini, T. P. Gharsa, F. Vaga, N. Magnin, and C. Boucly, “Real-Time control system upgrade of the CERN Linac4 pre-chopper”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 558-563. doi:10.18429/JACoW-ICALEPCS2025-TUPD017
[n] M. R. Shubaly, R. G. Maggs, and A. E. Weeden, “A High-Current Oxygen Ion Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1751-1754.
[n] G. Harris, Q. Ma, and D. R. Walters, “Coatings for the APS RF Cavity Tuners for the Reduction of Secondary Electrons”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA115, pp. 1342-1344.
[n] J. X. Chen et al., “Application of Remote Installation and Measurement Smart Vehicle in Accelerator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 217-219. doi:10.18429/JACoW-MEDSI2018-WEPH08
[n] K. Mittag and H. G. Hereward, “On Space Charge Instabilities and Emittance Growth in RF Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper D103, pp. 120-124.
[n] E. W. Blackmore, D. A. Dohan, G. H. Mackenzie, and R. Poirier, “Developments Toward Separated Turns at TRIUMF”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-29, pp. 485-487.
[n] S. Oh, W. H. Moore, and M. Yoon, “Design Study for Axial Injection of Polarized Ions into the Princeton University Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3033-3036.
[n] I. Weitman and M. Brown, “Data Acquisition and Display System (DACADS) for the 200 MeV Linac at the AGS”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper E-5, pp. 423-442.
[n] E. S. Park, H. S. Han, Y. M. Koo, and Y. G. Nah, “Engineering Design of the PLS 2 GeV Storage Ring Dipole Magnet”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2345-2348.
[n] S. M. Gierman et al., “Operating a Tungsten Dispenser Cathode in Photo-Emission Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP088, pp. 575-576.
[n] E. Colby, “A High Charge, High Duty Factor RF Photoinjector for the Next Generation Linear Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH2006, pp. 758-764.
[n] J. A. MacLachlan, “Correcting Closed-Orbit Distortion in the NAL Main Ring”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 892-895.
[n] T. E. Levens, T. Bohl, and U. Wehrle, “A Beam-Synchronous Gated Peak-Detector for the LHC Beam Observation System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC35, pp. 147-150.
[n] P. Martín-Luna, A. Bonatto, C. Bontoiu, G. Xia, J. Resta-Lopez, and J. Rodríguez Pérez, “Particle beam-driven wakefield in carbon nanotubes: hydrodynamic model vs PIC simulations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 496-499. doi:10.18429/JACoW-IPAC2024-MOPR19
[n] J. H. Han et al., “Beam Operation of the PAL-XFEL Injector Test Facility”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEB02, pp. 615-622.
[n] G. K. Brunton et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 15. doi:10.18429/JACoW-ICALEPCS2019-MOAPP04
[n] W. Pelzer, “Stability Measurements at the VICKSI RF Systems”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-20, pp. 2202-2204.
[n] S. Saminathan et al., “Commissioning of the Radioactive Ion Beam Transport System for ARIEL”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper WEXB04, unpublished.
[n] A. Arnold, M. H. Berndt, A. Hoffmann, and P. Murcek, “Application of the plasma processing technique to the ELBE SRF gun”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP02, unpublished.
[n] A. Matheisen, N. Krupka, S. Saegebarth, P. Schilling, N. Steinhau-Kuehl, and B. van der Horst, “Experiences on Retreatment of EU-XFEL Series Cavities at DESY”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB075, pp. 296-300.
[n] A. Mosnier et al., “MACSE Superconducting Cavity RF Drive System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1064-1067.
[n] J. Smith, R. Parry, G. Claborn, A. Haas, R. Landis, and W. Page, “A High Reliability Oxygen Deficiency Monitoring System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2222-2225.
[n] J. X. Wu et al., “The BPM Measurement System in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD11, pp. 309-311.
[n] J. Rodríguez Pérez et al., “Optimization of a multichannel solid state plasma for laser wakefield acceleration with realistic laser parameters using a Bayesian algorithm”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1552-1555. doi:10.18429/JACoW-IPAC2025-TUPS054
[n] J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
[n] J. J. Kritzinger, R. E. Fenemore, and M. J. van Niekerk, “Performance of the NAC RF Systems”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-04, pp. 208-211.
[n] F.-J. Decker et al., “Results on Plasma Focusing of High Energy Density Electron and Positron Beams”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC13, pp. 884-886.
[n] G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
[n] M. R. Teague and S. S. Yu, “Numerical Simulation of Secondary Electron Orbits Near an Electron Beam Propagating in a Low Pressure Gas”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3512-3515.
[n] P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
[n] G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1251-1253. doi:10.18429/JACoW-IPAC2018-TUPMF003
[n] F. Zhou, D. Dowell, P. Emma, J. F. Schmerge, C. E. Mitchell, and F. Sannibale, “LCLS-II Injector Physics Design and Beam Tuning”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1655-1658. doi:10.18429/JACoW-IPAC2017-TUPAB138
[n] B. Aune et al., “First Operation of MACSE the Saclay Pilot Superconducting Electron Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2393-2396.
[n] S. Liuzzo et al., “Exploratory tests for the design of a Python accelerator middle layer”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 224-227. doi:10.18429/JACoW-IPAC2025-MOPB088
[n] S. Banna, D. Schieber, and L. Sch, “Scaling-Laws of Wake-Fields in Optical Structures”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19017, pp. XX-XX.
[n] J. Kim et al., “Laser Wakefield Acceleration by using a Laser Produced Aluminium Plasma”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 543-546. doi:10.18429/JACoW-FEL2015-TUP079
[n] V. M. Zorina et al., “RESEARCH FACILITY FOR AUTOMATED MEASUREMENTS OF THE CYCLOTRON MAGNETIC FIELD TOPOGRAPHY”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH03, pp. XX-XX.
[n] G. Sinha, A. Kumar, A. Mishra, and G. Singh, “Effect of Magnetic Field Coupling On INDUS-2 Quadrupole Magnets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA039, pp. 378-380.
[n] G. Olry et al., “Spiral2 Cryomodules B Tests Results”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP010, pp. 95-99.
[n] P. Muggli, Y. Fang, M. J. Hogan, W. B. Mori, L. O. Silva, and J. Vieira, “Self-modulation of Long Particle Bunches in Plasmas at SLAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP052, pp. 2831-2833.
[n] M. Andorf et al., “An overview of spin-polarized photocathode research at Cornell University”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 642-645. doi:10.18429/JACoW-IPAC2024-MOPR81
[n] A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4187-4189. doi:10.18429/JACoW-IPAC2019-THPTS037
[n] D. T. Palmer, F. King, and R. E. Kirby, “An Experimental Study of the Quantum Efficiency and Topology of Copper Photocathode Due to Plasma Cleaning and Etching”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPPE057, unpublished.
[n] J. Y. Tang et al., “Spallation Neutron Source Drift Tube Linac Resonance Control Cooling System Modeling”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT068, pp. 3754-3756.
[n] V. S. Kashikhin et al., “Design of Helical Solenoid Combined with RF Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB051, pp. 382-384.
[n] B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 141-143. doi:10.18429/JACoW-RUPAC2016-THCDMH02
[n] T. Suzuki et al., “Present Status of a Multi-Bunch Electron Beam Linac Based on Cs-Te Photo-Cathode RF-Gun at Waseda University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP102, pp. 608-610.
[n] R. J. Barlow, G. Yu. Kourevlev, and A. Mercer, “Simulation of Wake Field Effects on High Energy Particle Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP028, pp. 2018-2020.
[n] W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
[n] D. E. Lobb and P. A. Reeve, “A Proposed Superferric Combined Function Magnet”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B18, pp. 85-88.
[n] J. Ruf et al., “Development of a fast pulsed magnet system for the MYRRHA collaboration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1084-1087. doi:10.18429/JACoW-IPAC2024-TUPC37
[n] M. Mizumoto et al., “High Intensity Proton Accelerator for Nuclear Waste Transmutation”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-50, pp. 749-751.
[n] K. J. Suthar, M. White, G. K. Mistri, A. K. Suthar, and S. K. Suthar, “Design and Development of AI Augmented Robot for Surveillance of High Radiation Facilities”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 192. doi:10.18429/JACoW-MEDSI2020-TUPC08
[n] S. Levenson et al., “First demonstration of spin-polarized electrons from gallium nitride photocathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1335-1338. doi:10.18429/JACoW-IPAC2023-TUODB3
[n] R. Santiago Kern et al., “Completion of Testing Series Double-spoke Cavity Cryomodules for ESS”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 932-939. doi:10.18429/JACoW-SRF2023-THIAA03
[n] R. J. Noble et al., “The ORION Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG026, pp. 1858-1860.
[n] Y. Jongen, G. A. Karamysheva, N. A. Morozov, E. Samsonov, D. Vandeplassche, and S. E. Zaremba, “Computer Modeling of Magnetic System for C400 Superconducting Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS092, pp. 2589-2591.
[n] B. G. Chidley and J. G. Bayly, “Drift Tube Adjustment in an Evacuated Alvarez Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-6, pp. 1133-1140.
[n] M. R. Shubaly, R. W. Davis, and J. G. Plato, “A Low Cost Modular Control and Instrumentation System for Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0022, pp. 148-149.
[n] B. Higuera Gonzalez, T. Overton, Y. Saveliev, T. Pacey, and G. Xia, “Detailed simulation study of wakefield induced beam dynamics in the dielectric dechirper at CLARA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2210-2213. doi:10.18429/JACoW-IPAC2024-WEPG14
[n] A. Koschik et al., “Status of Commissioning of Gantry 3 at the PSI PROSCAN Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4744-4746. doi:10.18429/JACoW-IPAC2017-THPVA125
[n] K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1513-1515. doi:10.18429/JACoW-IPAC2018-TUPMK011
[n] E. Demmel, S. Luetgert, B. Offermann, and H. Schwarz, “A New High Power Klystron for the SLAC B-Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP079L, pp. 2152-2154.
[n] D. Howard and H. Lancaster, “Loop Coupling to a Radio Frequency Quadrupole Resonator (RFQ)”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E15, pp. 194-196.
[n] J. Tang, S. Fu, and L. Ma, “High Intensity Aspects of the CSNS Proton Accelerators”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOIC02, pp. 38-42.
[n] X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 187-190. doi:10.18429/JACoW-MEDSI2016-TUPE13
[n] B. Balhan, C. Baud, C. C. M. Borburgh, and M. Hourican, “Design and Construction of the CERN PS Booster Charge Exchange Injection Chicane Bumpers”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2575-2577. doi:10.18429/JACoW-IPAC2018-WEPMF082
[n] J. Van Zeijts, “Transverse Optics Improvements for RHIC Run 4”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT191, pp. 1580-1582.
[n] N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
[n] C. Serrano et al., “Design and Implementation of the LLRF System for LCLS-II”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1969-1974. doi:10.18429/JACoW-ICALEPCS2017-THSH202
[n] Z. Liu, H. Deng, Z. Jiang, X. Li, H. Qian, and G. Shu, “The correction of beam trajectory for low energy injector”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS026, unpublished.
[n] F. Wang and P. Wangler, “A Particle-Core Study of Halo Formation for a Mismatched Beam in a Periodic-Focusing System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP151, pp. 1848-1850.
[n] A. Furman, “RAMPRF: A Program for Synchronous Acceleration”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 300-303.
[n] H. Liu et al., “Design of a High Charge CW Photocathode Injector Test Stand at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA17, pp. 942-944.
[n] V. Commichau et al., “The Slow Control System for the Alpha Magnetic Spectrometer (AMS-02) on the International Space Station”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP523, pp. XX-XX.
[n] A. Gerbershagen, A. Adelmann, R. D?â, D. Meer, V. Rizzoglio, and J. M. Schippers, “Simulations and Measurements of Proton Beam Energy Spectrum After Energy Degradation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4740-4743. doi:10.18429/JACoW-IPAC2017-THPVA124
[n] J. Pottier, “A New Structure for Heavy-Ion Linacs”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 377-380.
[n] C. Rubbia, N. Fietier, and P. Mandrillon, “A High Intensity Accelerator for Driving the Energy Amplified for Nuclear Energy Production”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 270-273.
[n] J. H. Kelly, “Experimental Modal Analysis Vibration Measurement to Inform Engineering Design”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 235-237. doi:10.18429/JACoW-MEDSI2018-WEPH15
[n] F. Liu et al., “Development of an ultrahigh dose rate radiation platform for X-ray FLASH radiotherapy research”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2549-2552. doi:10.18429/JACoW-IPAC2023-TUPM135
[n] Y. Nosochkov et al., “Design of ILC Extraction Line for 20 mrad Crossing Angle”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP030, pp. 2134-2136.
[n] P. Arcioni, K. Ko, and R. P. Pendleton, “Numerical Evaluation of Beam Coupling Impedances in Heavily Damped Accelerating Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 907-910.
[n] F. Frassetto, L. P. Poletto, M. Kuhlmann, and E. Pl?Ânjes, “Double-grating Monochromator for Ultrafast Free-electron Laser Beamlines”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP019, pp. 58-61.
[n] K. Yoshida, S. Arai, Y. Hashimoto, H. Masuda, and K. Niki, “Model Test of a Double-Coaxial lambda/4 Resonant Cavity as a Rebuncher”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-28, pp. 771-773.
[n] J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
[n] S. Barabin et al., “Multifunction Test-Bench For Heavy Ion Sources”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM27, pp. XX-XX.
[n] W. J. Leonhardt, J. R. Cullen, and P. F. Gill, “Stress Rupture Considerations in the Design of Large Aperture, Low Mass Composite Vacuum Windows”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P002, pp. 3583-3585.
[n] W. Pirkl, A. M. Lombardi, and Y. Bylinsky, “First Operating Experience with the CERN Decelerating RFQ for Antiprotons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA009, pp. 585-587.
[n] D. P. Jin, Y. L. Zhang, and P. Zhu, “Design, Implementation and Setup of the Fast Protection System for CSNS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 543-544. doi:10.18429/JACoW-ICALEPCS2015-TUC3O02
[n] T. Hellert et al., “Error Analysis and Commissioning Simulation for the PETRA-IV Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1442-1444. doi:10.18429/JACoW-IPAC2022-TUPOMS018
[n] J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 243-246.
[n] D. A. Burton, J. Gratus, and R. Tucker, “Asymptotic Analysis of Ultra-relativistic Charge”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH073, pp. 2086-2088.
[n] A. W. Maschke and W. Oleksiuk, “The NAL Booster-to-Main Ring Beam Transfer System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 989-991.
[n] M. Carl?á, G. Benedetti, Z. Mart?¡, and L. S. Nadolski, “Optimization of Turn-by-Turn Measurements at Soleil and Alba Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1686-1689. doi:10.18429/JACoW-IPAC2015-TUPJE035
[n] P. E. Gibson, A. V. Aleksandrov, M. M. Champion, G. W. Dodson, J. P. Schubert, and J. Y. Tang, “Resonance Control Cooling System Performance and Developments”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE038, pp. 2541-2543.
[n] K. Evans and M. Smith, “Experience with the EPICS PV Gateway at the APS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT064, pp. 3621-3623.
[n] I. Ander, Z. Korm?íny, P. Kov?ícs, T. Lakatos, and I. Sz??cs, “Renewal and Automation of the ATOMKI MGC-20 Cyclotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7A07, pp. 1844-1846.
[n] A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1475-1479. doi:10.18429/JACoW-ICALEPCS2023-THPDP064
[n] H. Schlarb, N. Heidbrook, H. Kapitza, F. Ludwig, and N. Nagad, “Precision RF Gun Phase Monitor System for the VUV-FEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH025, pp. 1052-1054.
[n] J. F. Schmerge et al., “The LCLS-II Injector Design”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP042, pp. 815-819.
[n] N. Simos et al., “Effects of High Proton Fluences on CZT Detectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP018, pp. 3482-3484.
[n] I. Neththikumara, G. A. Krafft, Y. Roblin, and B. Terzi, “Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 553-555. doi:10.18429/JACoW-NAPAC2019-TUPLO09
[n] E. Hoyer et al., “The U5.0 Undulator for the ALS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2721-2724.
[n] F. Caspers, J. P. Delahaye, J. C. Godot, K. Hubner, and A. Poncet, “EPA Beam-Vacuum Interaction and Ion Clearing System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1324-1327.
[n] M. Abliz, C. L. Doose, Y. Ivanyushenkov, and I. Vasserman, “Temperature-Dependent Calibration of Hall Probes at Cryogenic Temperature”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP219, pp. 1223-1225.
[n] P. Muggli et al., “Electron and Positron Bunch Self-modulation Experiments at SLAC-FACET”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC02, pp. 84-86.
[n] E. Jones, “The CERN ppBar Facility”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 215-218.
[n] S. Psoroulas, C. Bula, P. Fernandez Carmona, G. Klimpki, D. Meer, and D. C. Weber, “Challenges in Fast Beam Current Control Inside the Cyclotron for Fast Beam Delivery in Proton Therapy”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 126-129. doi:10.18429/JACoW-Cyclotrons2016-TUA02
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 474-477. doi:10.18429/JACoW-IPAC2025-MOPM066
[n] D. Bishop et al., “ISAC Control System Update”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB34, pp. 235-237.
[n] J. M. Cavedon et al., “An Accelerator for Testing Superconducting RF Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 52-54.
[n] K.Nakanishi; K.Hara; A.Honma; K.Hosoyama; A.Kabe; Y.Kojima; H.Nakai; K.Akai; K.Ebihara; T.Furuya; S.Mitsunobu; Y.Morita; M.Ono; Y.Yamamoto, “COMMISSIONING OF CRAB CAVITY SYSTEM”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH04, pp. XX-XX.
[n] P. Lee et al., “Development of Physical Processes in Geant4 for Simulation of ISOL Target-Ion-Source System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1724-1726. doi:10.18429/JACoW-IPAC2018-TUPML077
[n] R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
[n] R. Sidlow and J. W. G. Thomason, “ISIS Ion Source Operational Experience”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A07, pp. 1625-1627.
[n] C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 707-710.
[n] S. F. Mikhailov et al., “Status of the Booster Synchrotron for Duke FEL Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG006, pp. 2273-2275.
[n] R. M. Mobley, “Calculation of the Depolarization of an Initially Polarized Beam in the Los Alamos Linac”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper E-15, pp. 430-432.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Christie, L. Corner, J. Henderson, and E. Snedden, “Developing a two-colour all-fibre balanced optical cross-correlator for sub-femtosecond synchronisation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA073, pp. 4135-4138.
- M. Niccolini, T. P. Gharsa, F. Vaga, N. Magnin, and C. Boucly, “Real-Time control system upgrade of the CERN Linac4 pre-chopper”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 558-563.
- M. R. Shubaly, R. G. Maggs, and A. E. Weeden, “A High-Current Oxygen Ion Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1751-1754.
- G. Harris, Q. Ma, and D. R. Walters, “Coatings for the APS RF Cavity Tuners for the Reduction of Secondary Electrons”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA115, pp. 1342-1344.
- J. X. Chen et al., “Application of Remote Installation and Measurement Smart Vehicle in Accelerator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 217-219.
- K. Mittag and H. G. Hereward, “On Space Charge Instabilities and Emittance Growth in RF Linacs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper D103, pp. 120-124.
- E. W. Blackmore, D. A. Dohan, G. H. Mackenzie, and R. Poirier, “Developments Toward Separated Turns at TRIUMF”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-29, pp. 485-487.
- S. Oh, W. H. Moore, and M. Yoon, “Design Study for Axial Injection of Polarized Ions into the Princeton University Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3033-3036.
- I. Weitman and M. Brown, “Data Acquisition and Display System (DACADS) for the 200 MeV Linac at the AGS”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper E-5, pp. 423-442.
- E. S. Park, H. S. Han, Y. M. Koo, and Y. G. Nah, “Engineering Design of the PLS 2 GeV Storage Ring Dipole Magnet”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2345-2348.
- S. M. Gierman et al., “Operating a Tungsten Dispenser Cathode in Photo-Emission Mode”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP088, pp. 575-576.
- E. Colby, “A High Charge, High Duty Factor RF Photoinjector for the Next Generation Linear Collider”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH2006, pp. 758-764.
- J. A. MacLachlan, “Correcting Closed-Orbit Distortion in the NAL Main Ring”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 892-895.
- T. E. Levens, T. Bohl, and U. Wehrle, “A Beam-Synchronous Gated Peak-Detector for the LHC Beam Observation System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC35, pp. 147-150.
- P. Martín-Luna, A. Bonatto, C. Bontoiu, G. Xia, J. Resta-Lopez, and J. Rodríguez Pérez, “Particle beam-driven wakefield in carbon nanotubes: hydrodynamic model vs PIC simulations”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR19, pp. 496-499.
- J. H. Han et al., “Beam Operation of the PAL-XFEL Injector Test Facility”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper WEB02, pp. 615-622.
- G. K. Brunton et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 15.
- W. Pelzer, “Stability Measurements at the VICKSI RF Systems”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-20, pp. 2202-2204.
- S. Saminathan et al., “Commissioning of the Radioactive Ion Beam Transport System for ARIEL”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper WEXB04, unpublished.
- A. Arnold, M. H. Berndt, A. Hoffmann, and P. Murcek, “Application of the plasma processing technique to the ELBE SRF gun”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP02, unpublished.
- A. Matheisen, N. Krupka, S. Saegebarth, P. Schilling, N. Steinhau-Kuehl, and B. van der Horst, “Experiences on Retreatment of EU-XFEL Series Cavities at DESY”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB075, pp. 296-300.
- A. Mosnier et al., “MACSE Superconducting Cavity RF Drive System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1064-1067.
- J. Smith, R. Parry, G. Claborn, A. Haas, R. Landis, and W. Page, “A High Reliability Oxygen Deficiency Monitoring System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2222-2225.
- J. X. Wu et al., “The BPM Measurement System in HIRFL-CSR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD11, pp. 309-311.
- J. Rodríguez Pérez et al., “Optimization of a multichannel solid state plasma for laser wakefield acceleration with realistic laser parameters using a Bayesian algorithm”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS054, pp. 1552-1555.
- J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
- J. J. Kritzinger, R. E. Fenemore, and M. J. van Niekerk, “Performance of the NAC RF Systems”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-04, pp. 208-211.
- F.-J. Decker et al., “Results on Plasma Focusing of High Energy Density Electron and Positron Beams”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC13, pp. 884-886.
- G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
- M. R. Teague and S. S. Yu, “Numerical Simulation of Secondary Electron Orbits Near an Electron Beam Propagating in a Low Pressure Gas”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3512-3515.
- P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
- G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1251-1253.
- F. Zhou, D. Dowell, P. Emma, J. F. Schmerge, C. E. Mitchell, and F. Sannibale, “LCLS-II Injector Physics Design and Beam Tuning”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1655-1658.
- B. Aune et al., “First Operation of MACSE the Saclay Pilot Superconducting Electron Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2393-2396.
- S. Liuzzo et al., “Exploratory tests for the design of a Python accelerator middle layer”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB088, pp. 224-227.
- S. Banna, D. Schieber, and L. Sch, “Scaling-Laws of Wake-Fields in Optical Structures”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19017, pp. XX-XX.
- J. Kim et al., “Laser Wakefield Acceleration by using a Laser Produced Aluminium Plasma”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 543-546.
- V. M. Zorina et al., “RESEARCH FACILITY FOR AUTOMATED MEASUREMENTS OF THE CYCLOTRON MAGNETIC FIELD TOPOGRAPHY”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH03, pp. XX-XX.
- G. Sinha, A. Kumar, A. Mishra, and G. Singh, “Effect of Magnetic Field Coupling On INDUS-2 Quadrupole Magnets”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA039, pp. 378-380.
- G. Olry et al., “Spiral2 Cryomodules B Tests Results”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP010, pp. 95-99.
- P. Muggli, Y. Fang, M. J. Hogan, W. B. Mori, L. O. Silva, and J. Vieira, “Self-modulation of Long Particle Bunches in Plasmas at SLAC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP052, pp. 2831-2833.
- M. Andorf et al., “An overview of spin-polarized photocathode research at Cornell University”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR81, pp. 642-645.
- A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4187-4189.
- D. T. Palmer, F. King, and R. E. Kirby, “An Experimental Study of the Quantum Efficiency and Topology of Copper Photocathode Due to Plasma Cleaning and Etching”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE057, unpublished.
- J. Y. Tang et al., “Spallation Neutron Source Drift Tube Linac Resonance Control Cooling System Modeling”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT068, pp. 3754-3756.
- V. S. Kashikhin et al., “Design of Helical Solenoid Combined with RF Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB051, pp. 382-384.
- B. M. Sabirov, “Recent Optimized Design of ILC Cryomodule With Explosion Welding Technology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 141-143.
- T. Suzuki et al., “Present Status of a Multi-Bunch Electron Beam Linac Based on Cs-Te Photo-Cathode RF-Gun at Waseda University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP102, pp. 608-610.
- R. J. Barlow, G. Yu. Kourevlev, and A. Mercer, “Simulation of Wake Field Effects on High Energy Particle Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP028, pp. 2018-2020.
- W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
- D. E. Lobb and P. A. Reeve, “A Proposed Superferric Combined Function Magnet”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B18, pp. 85-88.
- J. Ruf et al., “Development of a fast pulsed magnet system for the MYRRHA collaboration”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC37, pp. 1084-1087.
- M. Mizumoto et al., “High Intensity Proton Accelerator for Nuclear Waste Transmutation”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-50, pp. 749-751.
- K. J. Suthar, M. White, G. K. Mistri, A. K. Suthar, and S. K. Suthar, “Design and Development of AI Augmented Robot for Surveillance of High Radiation Facilities”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 192.
- S. Levenson et al., “First demonstration of spin-polarized electrons from gallium nitride photocathodes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUODB3, pp. 1335-1338.
- R. Santiago Kern et al., “Completion of Testing Series Double-spoke Cavity Cryomodules for ESS”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper THIAA03, pp. 932-939.
- R. J. Noble et al., “The ORION Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG026, pp. 1858-1860.
- Y. Jongen, G. A. Karamysheva, N. A. Morozov, E. Samsonov, D. Vandeplassche, and S. E. Zaremba, “Computer Modeling of Magnetic System for C400 Superconducting Cyclotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS092, pp. 2589-2591.
- B. G. Chidley and J. G. Bayly, “Drift Tube Adjustment in an Evacuated Alvarez Linac”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper K-6, pp. 1133-1140.
- M. R. Shubaly, R. W. Davis, and J. G. Plato, “A Low Cost Modular Control and Instrumentation System for Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0022, pp. 148-149.
- B. Higuera Gonzalez, T. Overton, Y. Saveliev, T. Pacey, and G. Xia, “Detailed simulation study of wakefield induced beam dynamics in the dielectric dechirper at CLARA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG14, pp. 2210-2213.
- A. Koschik et al., “Status of Commissioning of Gantry 3 at the PSI PROSCAN Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4744-4746.
- K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1513-1515.
- E. Demmel, S. Luetgert, B. Offermann, and H. Schwarz, “A New High Power Klystron for the SLAC B-Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP079L, pp. 2152-2154.
- D. Howard and H. Lancaster, “Loop Coupling to a Radio Frequency Quadrupole Resonator (RFQ)”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E15, pp. 194-196.
- J. Tang, S. Fu, and L. Ma, “High Intensity Aspects of the CSNS Proton Accelerators”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOIC02, pp. 38-42.
- X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 187-190.
- B. Balhan, C. Baud, C. C. M. Borburgh, and M. Hourican, “Design and Construction of the CERN PS Booster Charge Exchange Injection Chicane Bumpers”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2575-2577.
- J. Van Zeijts, “Transverse Optics Improvements for RHIC Run 4”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT191, pp. 1580-1582.
- N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
- C. Serrano et al., “Design and Implementation of the LLRF System for LCLS-II”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1969-1974.
- Z. Liu, H. Deng, Z. Jiang, X. Li, H. Qian, and G. Shu, “The correction of beam trajectory for low energy injector”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS026, unpublished.
- F. Wang and P. Wangler, “A Particle-Core Study of Halo Formation for a Mismatched Beam in a Periodic-Focusing System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP151, pp. 1848-1850.
- A. Furman, “RAMPRF: A Program for Synchronous Acceleration”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 300-303.
- H. Liu et al., “Design of a High Charge CW Photocathode Injector Test Stand at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA17, pp. 942-944.
- V. Commichau et al., “The Slow Control System for the Alpha Magnetic Spectrometer (AMS-02) on the International Space Station”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP523, pp. XX-XX.
- A. Gerbershagen, A. Adelmann, R. D?â, D. Meer, V. Rizzoglio, and J. M. Schippers, “Simulations and Measurements of Proton Beam Energy Spectrum After Energy Degradation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4740-4743.
- J. Pottier, “A New Structure for Heavy-Ion Linacs”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 377-380.
- C. Rubbia, N. Fietier, and P. Mandrillon, “A High Intensity Accelerator for Driving the Energy Amplified for Nuclear Energy Production”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 270-273.
- J. H. Kelly, “Experimental Modal Analysis Vibration Measurement to Inform Engineering Design”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 235-237.
- F. Liu et al., “Development of an ultrahigh dose rate radiation platform for X-ray FLASH radiotherapy research”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM135, pp. 2549-2552.
- Y. Nosochkov et al., “Design of ILC Extraction Line for 20 mrad Crossing Angle”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP030, pp. 2134-2136.
- P. Arcioni, K. Ko, and R. P. Pendleton, “Numerical Evaluation of Beam Coupling Impedances in Heavily Damped Accelerating Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 907-910.
- F. Frassetto, L. P. Poletto, M. Kuhlmann, and E. Pl?Ânjes, “Double-grating Monochromator for Ultrafast Free-electron Laser Beamlines”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP019, pp. 58-61.
- K. Yoshida, S. Arai, Y. Hashimoto, H. Masuda, and K. Niki, “Model Test of a Double-Coaxial lambda/4 Resonant Cavity as a Rebuncher”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-28, pp. 771-773.
- J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
- S. Barabin et al., “Multifunction Test-Bench For Heavy Ion Sources”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM27, pp. XX-XX.
- W. J. Leonhardt, J. R. Cullen, and P. F. Gill, “Stress Rupture Considerations in the Design of Large Aperture, Low Mass Composite Vacuum Windows”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P002, pp. 3583-3585.
- W. Pirkl, A. M. Lombardi, and Y. Bylinsky, “First Operating Experience with the CERN Decelerating RFQ for Antiprotons”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA009, pp. 585-587.
- D. P. Jin, Y. L. Zhang, and P. Zhu, “Design, Implementation and Setup of the Fast Protection System for CSNS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 543-544.
- T. Hellert et al., “Error Analysis and Commissioning Simulation for the PETRA-IV Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1442-1444.
- J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 243-246.
- D. A. Burton, J. Gratus, and R. Tucker, “Asymptotic Analysis of Ultra-relativistic Charge”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH073, pp. 2086-2088.
- A. W. Maschke and W. Oleksiuk, “The NAL Booster-to-Main Ring Beam Transfer System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 989-991.
- M. Carl?á, G. Benedetti, Z. Mart?¡, and L. S. Nadolski, “Optimization of Turn-by-Turn Measurements at Soleil and Alba Light Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1686-1689.
- P. E. Gibson, A. V. Aleksandrov, M. M. Champion, G. W. Dodson, J. P. Schubert, and J. Y. Tang, “Resonance Control Cooling System Performance and Developments”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE038, pp. 2541-2543.
- K. Evans and M. Smith, “Experience with the EPICS PV Gateway at the APS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT064, pp. 3621-3623.
- I. Ander, Z. Korm?íny, P. Kov?ícs, T. Lakatos, and I. Sz??cs, “Renewal and Automation of the ATOMKI MGC-20 Cyclotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7A07, pp. 1844-1846.
- A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP064, pp. 1475-1479.
- H. Schlarb, N. Heidbrook, H. Kapitza, F. Ludwig, and N. Nagad, “Precision RF Gun Phase Monitor System for the VUV-FEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH025, pp. 1052-1054.
- J. F. Schmerge et al., “The LCLS-II Injector Design”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP042, pp. 815-819.
- N. Simos et al., “Effects of High Proton Fluences on CZT Detectors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP018, pp. 3482-3484.
- I. Neththikumara, G. A. Krafft, Y. Roblin, and B. Terzi, “Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 553-555.
- E. Hoyer et al., “The U5.0 Undulator for the ALS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2721-2724.
- F. Caspers, J. P. Delahaye, J. C. Godot, K. Hubner, and A. Poncet, “EPA Beam-Vacuum Interaction and Ion Clearing System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1324-1327.
- M. Abliz, C. L. Doose, Y. Ivanyushenkov, and I. Vasserman, “Temperature-Dependent Calibration of Hall Probes at Cryogenic Temperature”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP219, pp. 1223-1225.
- P. Muggli et al., “Electron and Positron Bunch Self-modulation Experiments at SLAC-FACET”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC02, pp. 84-86.
- E. Jones, “The CERN ppBar Facility”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 215-218.
- S. Psoroulas, C. Bula, P. Fernandez Carmona, G. Klimpki, D. Meer, and D. C. Weber, “Challenges in Fast Beam Current Control Inside the Cyclotron for Fast Beam Delivery in Proton Therapy”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 126-129.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM066, pp. 474-477.
- D. Bishop et al., “ISAC Control System Update”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB34, pp. 235-237.
- J. M. Cavedon et al., “An Accelerator for Testing Superconducting RF Structures”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 52-54.
- K.Nakanishi; K.Hara; A.Honma; K.Hosoyama; A.Kabe; Y.Kojima; H.Nakai; K.Akai; K.Ebihara; T.Furuya; S.Mitsunobu; Y.Morita; M.Ono; Y.Yamamoto, “COMMISSIONING OF CRAB CAVITY SYSTEM”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH04, pp. XX-XX.
- P. Lee et al., “Development of Physical Processes in Geant4 for Simulation of ISOL Target-Ion-Source System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1724-1726.
- R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
- R. Sidlow and J. W. G. Thomason, “ISIS Ion Source Operational Experience”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A07, pp. 1625-1627.
- C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 707-710.
- S. F. Mikhailov et al., “Status of the Booster Synchrotron for Duke FEL Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG006, pp. 2273-2275.
- R. M. Mobley, “Calculation of the Depolarization of an Initially Polarized Beam in the Los Alamos Linac”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper E-15, pp. 430-432.
Back to search