Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. R. Ader, C. C. Jensen, R. E. Reilly, D. Snee, and J. H. Wilson, “Recent Experience in the Fabrication and Brazing of Ceramic Beam Tubes for Kicker Magnets at FNAL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC139, pp. 2335-2337.
[n] J. Hagel and B. Zotter, “A New Approach to Potential Well Bunch Deformation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 488-491.
[n] S. S. Kurennoy, J. F. Power, R. J. Roybal, and D. L. Schrage, “Progress with SNS Fast Beam Chopper”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH098, pp. 1435-1437.
[n] K. Scheidt and G. A. Naylor The European Synchrotron Radiation Facility, “500 fs Streak Camera for UV-Hard X-Rays in 1 kHz Accumulating Mode with Optical 'Jitter Free' Synchronisation”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT03, pp. XX-XX.
[n] A. C. Lira, G. Monteiro, L. H. Oliveira, and A. R. Silva, “Power Supplies for the LNLS 500-MeV Booster Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH017, pp. 3702-3704.
[n] T. Lamb et al., “Design and Operation of the Integrated 1.3 GHz Optical Reference Module with Femtosecond Precision”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3963-3965. doi:10.18429/JACoW-IPAC2017-THPAB105
[n] G. Guignard and J. Hagel, “Multibunch Emittance Preservation in CLIC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP015G, pp. 1018-1020.
[n] C. E. Rufer and W. Unterlerchner, “Low Cost Vacuum Hardware Developed for the CERN PS Booster”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 649-654.
[n] R. A. Bosch, K. J. Kleman, and J. Wu, “Microbunching Gain of the Wisconsin FEL Beam Spreader”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP057, pp. 2395-2397.
[n] F. Loyer and K. Scheidt, “Project of a Beam Position Monitor for the ESRF Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1112-1115.
For LaTeX
Use Complete Form
For BibTeX
References
- C. R. Ader, C. C. Jensen, R. E. Reilly, D. Snee, and J. H. Wilson, “Recent Experience in the Fabrication and Brazing of Ceramic Beam Tubes for Kicker Magnets at FNAL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC139, pp. 2335-2337.
- J. Hagel and B. Zotter, “A New Approach to Potential Well Bunch Deformation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 488-491.
- S. S. Kurennoy, J. F. Power, R. J. Roybal, and D. L. Schrage, “Progress with SNS Fast Beam Chopper”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH098, pp. 1435-1437.
- K. Scheidt and G. A. Naylor The European Synchrotron Radiation Facility, “500 fs Streak Camera for UV-Hard X-Rays in 1 kHz Accumulating Mode with Optical 'Jitter Free' Synchronisation”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT03, pp. XX-XX.
- A. C. Lira, G. Monteiro, L. H. Oliveira, and A. R. Silva, “Power Supplies for the LNLS 500-MeV Booster Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH017, pp. 3702-3704.
- T. Lamb et al., “Design and Operation of the Integrated 1.3 GHz Optical Reference Module with Femtosecond Precision”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3963-3965.
- G. Guignard and J. Hagel, “Multibunch Emittance Preservation in CLIC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP015G, pp. 1018-1020.
- C. E. Rufer and W. Unterlerchner, “Low Cost Vacuum Hardware Developed for the CERN PS Booster”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 649-654.
- R. A. Bosch, K. J. Kleman, and J. Wu, “Microbunching Gain of the Wisconsin FEL Beam Spreader”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP057, pp. 2395-2397.
- F. Loyer and K. Scheidt, “Project of a Beam Position Monitor for the ESRF Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1112-1115.
Back to search