JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	W. Duckitt and J. K. Abraham, “React Automation Studio: A New Face to Control Large  Scientific Equipment”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 285-288. doi:10.18429/JACoW-CYCLOTRONS2019-THA03
[n]	W. P. Leemans et al., “Laser Based Sub-Picosecond Electron Bunch Characterization Using 90$^{circ}$ Thomson Scattering”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7C004, pp. 1984-1986. 
[n]	P. V. Livdahl, “The Livermore MTA Project and its Influence on Modern Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A101, pp. 5-11. 
[n]	S. M. Lidia and K. Murphy, “Error Analysis for Pepperpot Emittance Measurements Redux: Correlated Phase Spaces”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF17, pp. 579-583. 
[n]	S. J. Mills, F. M. Nortier, H. A. Smit, G. F. Steyn, and W. L. Rautenbach, “A Multi-Purpose Target Station for Radioisotope Production at Medium Energies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-06, pp. 527-530. 
[n]	M. Cornacchia, S. Di Mitri, G. Penco, and A. Zholents, “Formation of Electron Bunches for Harmonic Cascade X-ray Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOPA01, pp. 2738-2740. 
[n]	A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127. 
[n]	J. C. Herrera and M. Month, “Investigation of Gradient Corrections for the AGS”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 187-192. 
[n]	Y. Nosochkov, M. J. Hogan, and W. Wittmer, “Optics Tuning Knobs for FACET”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP090, pp. 268-270. 
[n]	A. Citron, “Compilation of Experimental Results and Operating Experience”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-1, pp. XX-XX. 
[n]	J. H. Martin, J. A. Dinkel, L. A. Klaisner, and H. Varga, “Manipulation of the ZGS Beam for Targeting”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 969-973. 
[n]	T. Yan, “Computation of Nonlinear One-Turn Maps from Measurement with Model-Independent Analysis”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL4, pp. 363-365. 
[n]	T. Yan, “Normalization of the Parameterized Courant-Snyder Matrix for Symplectic Factorization of a Parameterized Taylor Map”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1663-1666. 
[n]	T. Yan, “ZLIB: A Numerical Library for Differential Algebra and Lie Algebraic Treatment of Beam Dynamics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 333-336. 
[n]	R. Chasman, E. D. Courant, M. Month, and A. van Steenbergen, “Experimental Insertions for the ISA”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 793-796. 
[n]	A. Chirkov, N. Doinikov, Yu. Severgin, and S. Sytchevsky, “Harmonic Analysis of Elongated Rectangular Aperture Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1250-1253. 
[n]	C. Clavero, D. Beringer, R. A. Lukaszew, W. M. Roach, R. Skuza, and C. E. Reece, “Strain Effects in the Superconducting Properties of Niobium Thin Films grown on Sapphire”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO047, pp. 835-837. 
[n]	G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732. 
[n]	P. V. Livdahl, “ZGS Injector Observations”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-3, pp. 384-397. 
[n]	E. N. Zaplatine, “Better RF Cavities for HERA/PETRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP44C, pp. 1832-1836. 
[n]	N. Balal and V. L. Bratman, “Radiation and Interaction of Layers in Quasi-plane Electron Bunches Moving in Undulators”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP015, pp. 388-390. 
[n]	J. K. Abraham and W. Duckitt, “Integration of EtherCAT Hardware Into the EPICS Based Distributed Control System at iThemba LABS”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 152-155. doi:10.18429/JACoW-CYCLOTRONS2019-TUP004
[n]	R. Mariotti, W. Buxton, R. Frankel, and L. Hoff, “Generic Device Controller for Accelerator Control Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 600-603. 
[n]	J. L. Kirchgessner, “Proposed High Current Booster Synchrotron for the Princeton-Pennsylvnia Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 956-959. 
[n]	R. W. Chasman, E. D. Courant, and M. Month, “Effects in Low Periodicity Lattices Resulting from Low beta Insertions”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1429-1433. 
[n]	R. Hettel, D. Mostowfi, R. Ortiz, and J. Sebek, “Triggers and Timing System for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1478-1481. 
[n]	G. V. Dolbilov et al., “Study of 14 GHz VLEPP Klystron With RF Absorbing Drift Tubes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ34, pp. 1605-1607. 
[n]	N. I. Azorsky et al., “Experimental Study of 100 MW Wide-aperture X-band Klystron with RF Absorbing Drift Tubes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP045L, pp. 2143-2145. 
[n]	G. Bienvenu, J. C. Bourdon, P. Brunet, and J. Rodier, “Accelerating Structure Developments for the LEP Injector Linacs (LIL)”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRQ0003, pp. 463-465. 
[n]	V. N. Buldakovsky et al., “Beam Extraction System of the Synchrophasotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3015-3018. 
[n]	N. Fewell and Z. Wen, “High Order Mode Damping in the NSLS Accelerating RF Cavities by the Use of Damping Antenna”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2781-2784. 
[n]	A. H. Barnard et al., “Vertical Focussing with a Field Gradient Spiral Inflector”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 58-61. doi:10.18429/JACoW-CYCLOTRONS2019-MOP016
[n]	F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585. 
[n]	J. A. Dinkel, L. A. Klaisner, and G. S. Tool, “NAL Booster and Storage-Ring RF Systems”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 510-516. 
[n]	V. Amoskov et al., “Numerical Simulation of 3-D Field of Systems using Permanent Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP031G, pp. 2161-2163. 
[n]	K.-U. Kuehnel, A. Schempp, and C. P. Welsch, “Development of Finger Drift Tube Linacs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT028, pp. 1204-1206. 
[n]	M. Month, “Nature of the Beam-Beam Limit in Storage Rings”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1376-1381. 
[n]	T. Fanselow et al., “Operational Experience in the Treatment of Ocular Melanomas with a New Digital Low-level RF Control System”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 162-165. doi:10.18429/JACoW-CYCLOTRONS2019-TUP007
[n]	D. E. Young, “Drift Tube Structures”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 6-01, pp. 204-220. 
[n]	O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX. 
[n]	R. Zhang et al., “Initial Operation of the UCLA Plane Wave Transformer (PWT) Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA21, pp. 1102-1104. 
[n]	M. Sivertz, I.-H. Chiang, and A. Rusek, “Calibration and Performance of a Secondary Emission Chamber as a Beam Intensity Monitor”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP206, pp. 480-482. 
[n]	L. Durieu, O. Ferrando, J.-Y. Hemery, J.-P. Riunaud, and B. Williams, “The CERN PS East Area in the LHC Era”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P008, pp. 228-230. 
[n]	D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1347-1350. 
[n]	M. Nordby, E. F. Daly, N. Kurita, and J. Langton, “A Zero-Length Bellows for the PEP-II High-Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP08, pp. 2051-2053. 
[n]	S. Abbott, J. Alonso, J. Brown, J. Kalnins, G. Krebs, and R. Reimers, “Design of a Pulsed Switching Magnet for the Bevalac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 372-375. 
[n]	Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX. 
[n]	S. Prawanta et al., “Design and Construction of Sextupole Magnet Prototype for  Siam Photon Source II Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4295-4297. doi:10.18429/JACoW-IPAC2019-THPTS076
[n]	H. Lengeler, “Design of Superconducting Accelerator Cavities”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-10, pp. XX-XX. 
[n]	R. L. Witkover and N. Fewell, “Automatic Electronic Emittance Device for the BNL 200 MeV Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper B-2, pp. 125-142. 
[n]	W. S. Graves et al., “Design of the Source Development Lab Bunch Compressor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W026, pp. 1197-1199. 
[n]	S. M. Anlage, “Near-Field Microwave Microscopy of Superconducting Materials”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUOBAU02, pp. 129-129. 
[n]	S. R. Channon, J. E. Golden, B. C. Maglich, R. A. Miller, and J. R. Treglio, “Design Considerations for a Migma Advanced Fuel Fusion Reactor”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1018-1020. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search