Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Fukuda et al., “Design Studies of the K900 JAERI Superconducting AVF Cyclotron for the Research in Biotechnology and Materials Science”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-11, pp. XX-XX.
[n] T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 253-255. doi:10.18429/JACoW-NAPAC2022-MOPA87
[n] W. Hartung et al., “Performance of FRIB Production Quarter-Wave and Half-Wave Resonators in Dewar Certification Tests”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1023-1028. doi:10.18429/JACoW-SRF2019-THP061
[n] C. C. Lo, “The Phase Servo Tuner Control System of the ALS 500 MHz Cavity”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1142-1145.
[n] A. V. Tyukhtin, E. G. Doil, and A. Kanareykin, “Particle Energy Determination Technique Based on Waveguide Mode Frequency Measurement”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE044, pp. 1071-1073.
[n] F. M. Velotti et al., “Characterisation of the SPS Slow-extraction Parameters”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3918-3921. doi:10.18429/JACoW-IPAC2016-THPOR055
[n] H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
[n] M. Boyes, “Laser Heater Controls Overview at the Linac Coherent Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP069, pp. XX-XX.
[n] Q. K. Jia, “Design Consideration of New Insertion Devices of Hefei Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC166, pp. 3284-3286.
[n] C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 157-159. doi:10.18429/JACoW-ICALEPCS2015-MOPGF029
[n] K. R. Bourkland and J. A. Dinkel, “Bipolar Operation of the Main Ring Magnet Supplies”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4063-4066.
[n] S. G. Yaramyshev et al., “A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3220-3222. doi:10.18429/JACoW-IPAC2014-THPME007
For LaTeX
Use Complete Form
For BibTeX
References
- M. Fukuda et al., “Design Studies of the K900 JAERI Superconducting AVF Cyclotron for the Research in Biotechnology and Materials Science”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-11, pp. XX-XX.
- T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 253-255.
- W. Hartung et al., “Performance of FRIB Production Quarter-Wave and Half-Wave Resonators in Dewar Certification Tests”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1023-1028.
- C. C. Lo, “The Phase Servo Tuner Control System of the ALS 500 MHz Cavity”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1142-1145.
- A. V. Tyukhtin, E. G. Doil, and A. Kanareykin, “Particle Energy Determination Technique Based on Waveguide Mode Frequency Measurement”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE044, pp. 1071-1073.
- F. M. Velotti et al., “Characterisation of the SPS Slow-extraction Parameters”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3918-3921.
- H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
- M. Boyes, “Laser Heater Controls Overview at the Linac Coherent Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP069, pp. XX-XX.
- Q. K. Jia, “Design Consideration of New Insertion Devices of Hefei Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC166, pp. 3284-3286.
- C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 157-159.
- K. R. Bourkland and J. A. Dinkel, “Bipolar Operation of the Main Ring Magnet Supplies”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4063-4066.
- S. G. Yaramyshev et al., “A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3220-3222.
Back to search