Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. B. Gonz?ílez Fern?índez, S. A. McDonald, K. Nygard, and L. K. Roslund, “ForMAX Endstation - a Novel Design Combining Full-Field Tomography with Small- and Wide-Angle X-Ray Scattering”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 289. doi:10.18429/JACoW-MEDSI2020-WEPB12
[n] F. Furuta, D. J. Bice, M. Martinello, and T. J. Ring, “Extra-Cold EP Process at Fermilab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 230. doi:10.18429/JACoW-SRF2021-MOPTEV012
[n] A. Zavadtsev, “Biperiodic U-structures for Particle Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2176-2179.
[n] C. Bon et al., “An Effective-Density Model for Accelerating Fields in Laser-Graphene Interactions”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1795-1797. doi:10.18429/JACoW-IPAC2022-WEPOST043
[n] N. Akaoka et al., “Development of Superconducting Single Cell Cavity for a Proton Linac in the Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP06G, pp. 734-736.
[n] N. G. Wilson and D. Precechtel, “Mechanical Design and Fabrication of a 425-MHz H-Buncher”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1851-1854.
[n] R. Bacher, “Light-weight Web-based Control Applications with the Web2CToolkit”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP110, pp. 889-891.
[n] R. Bacher, “Enhancing the Man-Machine-Interface of Accelerator Control Applications with Modern Consumer Market Technologies”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB02, pp. 1044-1047.
[n] G. H. Gong, H. Li, T. Xue, and H. Gong, “The Global Trigger with Online Vertex Fitting for Low Energy Neutrino Research”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1107-1110. doi:10.18429/JACoW-ICALEPCS2015-THHB2O03
[n] K. Yokoya, “ILC Parameters Rationale and Challenges”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper MOZMA02, pp. XX-XX.
[n] G. S. Brown, V. P. Suller, and E. Zinin, “Measurement of Bunch Length with an Image Dissector Tube”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2348-2351.
[n] H. Pfeffer and R. J. Yarema, “A Bipolar, High Precision, Low Ripple Power Supply”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2870-2873.
[n] R. Fliller III et al., “Crystal Collimation at RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUAGB002, pp. 200-202.
[n] S. A. Kahn, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “HTS Development for 30-50 T Final Muon Cooling Solenoids”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP071, pp. 295-297.
[n] B. C. Barish and K. Yokoya, “Report on ILC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper MOZMA01, pp. XX-XX.
[n] G. Gelato, L. Magnani, N. Rasmussen, H. Schoenauer, and K. Schindl, “Progress in Space-Charge Limited Machines: Four Times the Design Intensity in the CERN Proton Synchrotron Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1298-1301.
[n] M. Ge, T. Gruber, A. T. Holic, M. Liepe, and J. Sears, “Superconducting RF Performance of Cornell 500 MHz N-Doped B-Cell SRF Cavitiy”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 764. doi:10.18429/JACoW-SRF2021-THPFDV005
[n] M. Schuett et al., “Commissioning of the RFQcb at the Isolde Offline 2 target test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1506-1509. doi:10.18429/JACoW-IPAC2023-TUPA081
[n] J. P. Gourber and C. W. Wyss, “Prototypes of LEP Bending Magnets with Steel-Concrete Cores”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2867-2870.
[n] G. Arduini et al., “Electron Cloud: Observations with LHC-Type Beams in the SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B16, pp. 939-941.
[n] F. Furuta, D. J. Bice, A. C. Crawford, and T. J. Ring, “Fermilab EP Facility Improvement”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 453-455. doi:10.18429/JACoW-SRF2019-TUP022
[n] M. W. Poole et al., “The DIAMOND Project: An Advanced Light Source for the UK”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA004, pp. 227-229.
[n] K. Mukugi et al., “Fracture Toughness and Mechanical Properties of Pure Niobium and Welded Joints for Superconducting Cavities at 4K”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP042, pp. 319-323.
[n] M. R. Cleland and P. Farrell, “Dynamitrons of the Future”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 227-235.
[n] M. Kando et al., “Performance Study of High Current Photo-Cathode RF-Gun with New Laser System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A07, pp. 1663-1665.
[n] X. L. Zhang, S. Kurokawa, H. Fukuma, and K. Yokoya, “Simulation Study of Fast Beam-Ion Instability”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D024, pp. 444-446.
[n] Y. Muroya et al., “Sub-Picosecond Pulse Radiolysis Project at NERL, Univ. of Tokyo”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP153, pp. 2602-2604.
[n] X. Liu et al., “The Design of Control System for the Optical Cavity Adjuster of a FEL-THz Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA044, pp. 1232-1234.
[n] N.-Y. Huang et al., “Study of an upgraded lattice for Taiwan Photon Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1324-1326. doi:10.18429/JACoW-IPAC2024-TUPG41
[n] R. E. Laxdal et al., “The Injector Cryomodule for the ARIEL e-Linac at TRIUMF”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB091, pp. 389-391.
[n] W. P. Dou et al., “The Prgress of the China Material Irradiation Facility RFQ”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 115-118. doi:10.18429/JACoW-SAP2017-MOPH36
[n] E. I. Simakov et al., “Update on Fabrication and Tuning of the Photonic Band Gap Accelerating Structure for the Wakefield Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC25, pp. 120-122.
[n] S. Proskin, D. Fischer, and A. V. Mishin, “New 3 MeV and 7 MeV Accelerators for Cargo Screening and NDT”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2491-2493. doi:10.18429/JACoW-IPAC2021-TUPAB412
[n] M. Wilcox, “European Industry's Potential Capabilities for High Power RF Systems for the Future IlC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI05, pp. 2693-2695.
[n] J. Yan, S. Philip, and C. Seaton, “ModBus/TCP Applications for CEBAF Accelerator Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 424-426. doi:10.18429/JACoW-ICALEPCS2017-TUPHA024
[n] R. C. McCrady, J. D. Gilpatrick, and H. A. Watkins, “Beam Position and Phase Monitors for the LANSCE Linac”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG016, pp. 59-61.
[n] A. Dehne, T. Hermes, N. Moeller, and R. Bacher, “MARWIN: A Mobile Autonomous Robot for Maintenance and Inspection”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 76-80. doi:10.18429/JACoW-ICALEPCS2017-MOCPL06
[n] F. Long, “Status and Trends in Magnet Power Converter Technology for Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2822-2827. doi:10.18429/JACoW-IPAC2014-THYB01
[n] P. Plascjak et al., “The Operational Status of the National Institutes of Health Cyclotron Complex”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-25, pp. 685-688.
[n] S. K. Tian, Y. Jiao, N. Wang, and K. Ohmi, “Ion Instability Simulation in the HEPS Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4189-4191. doi:10.18429/JACoW-IPAC2018-THPMF055
[n] F. Soubelet, ?û. Apsimon, T. H. B. Persson, R. Tom?ís Garc?¡a, and C. P. Welsch, “Supervised Machine Learning for Local Coupling Sources Detection in the LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1842-1845. doi:10.18429/JACoW-IPAC2022-WEPOPT008
[n] Yu. A. Kubyshin et al., “Current Status of the 12 MeV UPC Race-Track Microtron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP112, pp. 2775-2777.
[n] L. Fernandez et al., “Front-End Software Architecture”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA04, pp. 310-312.
[n] V. Dokutovich, A. D. Chernyakin, and D. V. Senkov, “High-Voltage Power Supply for GOG-1001”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 587-588. doi:10.18429/JACoW-RUPAC2016-THPSC022
[n] S. P. Moeller, “ASTRID, A Storage Ring for Ions and Electrons”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 112-115.
[n] Z. Segalov, M. Reiser, J. Rodgers, W. W. Destler, and K. Ramaswamy, “High Power, High Brightness Electron Beam Generation in a Pulse-Line Driven Pseudospark Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 685-688.
[n] T. Zhang et al., “Numerical Investigations of Transverse Gradient Undulator Based Novel Light Sources”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO84, pp. 152-155.
[n] J. B. Rosenzweig, X. Ding, D. T. Palmer, C. Pellegrini, L. Serafini, and D. Yu, “Beam Dynamics in an Integrated Plane Wave Transformer Photoinjector at S- and X-Band”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V033, pp. 1968-1970.
[n] M. Kelly, “Status of superconducting spoke cavity development”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE302, pp. XX-XX.
[n] R. C. Kennedy and J. L. Adamski, “Spectrograph for Free Electron Laser Experiments”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3142-3145.
[n] J. T. M. Lyles et al., “RF Design and Operating Results for a New 201.25 MHz RF Power Amplifier for LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP135, pp. 1091-1093.
[n] J. Hebling, G. Alm?ísi, J. A. F??l?Âp, M. I. Mechler, Z. Tibai, and Gy. T??th, “Simple Setups for Carrier-envelope-phase Stable Single-cycle Attosecond Pulse Generation”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO30, pp. 63-67.
[n] L. Staykov et al., “Commissioning of a New Emittance Measurement System at PITZ”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH067, pp. 474-476.
For LaTeX
Use Complete Form
For BibTeX
References
- J. B. Gonz?ílez Fern?índez, S. A. McDonald, K. Nygard, and L. K. Roslund, “ForMAX Endstation - a Novel Design Combining Full-Field Tomography with Small- and Wide-Angle X-Ray Scattering”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 289.
- F. Furuta, D. J. Bice, M. Martinello, and T. J. Ring, “Extra-Cold EP Process at Fermilab”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 230.
- A. Zavadtsev, “Biperiodic U-structures for Particle Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2176-2179.
- C. Bon et al., “An Effective-Density Model for Accelerating Fields in Laser-Graphene Interactions”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1795-1797.
- N. Akaoka et al., “Development of Superconducting Single Cell Cavity for a Proton Linac in the Neutron Science Project at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP06G, pp. 734-736.
- N. G. Wilson and D. Precechtel, “Mechanical Design and Fabrication of a 425-MHz H-Buncher”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1851-1854.
- R. Bacher, “Light-weight Web-based Control Applications with the Web2CToolkit”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP110, pp. 889-891.
- R. Bacher, “Enhancing the Man-Machine-Interface of Accelerator Control Applications with Modern Consumer Market Technologies”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB02, pp. 1044-1047.
- G. H. Gong, H. Li, T. Xue, and H. Gong, “The Global Trigger with Online Vertex Fitting for Low Energy Neutrino Research”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1107-1110.
- K. Yokoya, “ILC Parameters Rationale and Challenges”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper MOZMA02, pp. XX-XX.
- G. S. Brown, V. P. Suller, and E. Zinin, “Measurement of Bunch Length with an Image Dissector Tube”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2348-2351.
- H. Pfeffer and R. J. Yarema, “A Bipolar, High Precision, Low Ripple Power Supply”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2870-2873.
- R. Fliller III et al., “Crystal Collimation at RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUAGB002, pp. 200-202.
- S. A. Kahn, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “HTS Development for 30-50 T Final Muon Cooling Solenoids”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP071, pp. 295-297.
- B. C. Barish and K. Yokoya, “Report on ILC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper MOZMA01, pp. XX-XX.
- G. Gelato, L. Magnani, N. Rasmussen, H. Schoenauer, and K. Schindl, “Progress in Space-Charge Limited Machines: Four Times the Design Intensity in the CERN Proton Synchrotron Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1298-1301.
- M. Ge, T. Gruber, A. T. Holic, M. Liepe, and J. Sears, “Superconducting RF Performance of Cornell 500 MHz N-Doped B-Cell SRF Cavitiy”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 764.
- M. Schuett et al., “Commissioning of the RFQcb at the Isolde Offline 2 target test facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA081, pp. 1506-1509.
- J. P. Gourber and C. W. Wyss, “Prototypes of LEP Bending Magnets with Steel-Concrete Cores”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2867-2870.
- G. Arduini et al., “Electron Cloud: Observations with LHC-Type Beams in the SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B16, pp. 939-941.
- F. Furuta, D. J. Bice, A. C. Crawford, and T. J. Ring, “Fermilab EP Facility Improvement”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 453-455.
- M. W. Poole et al., “The DIAMOND Project: An Advanced Light Source for the UK”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA004, pp. 227-229.
- K. Mukugi et al., “Fracture Toughness and Mechanical Properties of Pure Niobium and Welded Joints for Superconducting Cavities at 4K”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP042, pp. 319-323.
- M. R. Cleland and P. Farrell, “Dynamitrons of the Future”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 227-235.
- M. Kando et al., “Performance Study of High Current Photo-Cathode RF-Gun with New Laser System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A07, pp. 1663-1665.
- X. L. Zhang, S. Kurokawa, H. Fukuma, and K. Yokoya, “Simulation Study of Fast Beam-Ion Instability”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D024, pp. 444-446.
- Y. Muroya et al., “Sub-Picosecond Pulse Radiolysis Project at NERL, Univ. of Tokyo”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP153, pp. 2602-2604.
- X. Liu et al., “The Design of Control System for the Optical Cavity Adjuster of a FEL-THz Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA044, pp. 1232-1234.
- N.-Y. Huang et al., “Study of an upgraded lattice for Taiwan Photon Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG41, pp. 1324-1326.
- R. E. Laxdal et al., “The Injector Cryomodule for the ARIEL e-Linac at TRIUMF”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB091, pp. 389-391.
- W. P. Dou et al., “The Prgress of the China Material Irradiation Facility RFQ”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 115-118.
- E. I. Simakov et al., “Update on Fabrication and Tuning of the Photonic Band Gap Accelerating Structure for the Wakefield Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC25, pp. 120-122.
- S. Proskin, D. Fischer, and A. V. Mishin, “New 3 MeV and 7 MeV Accelerators for Cargo Screening and NDT”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2491-2493.
- M. Wilcox, “European Industry's Potential Capabilities for High Power RF Systems for the Future IlC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIBKI05, pp. 2693-2695.
- J. Yan, S. Philip, and C. Seaton, “ModBus/TCP Applications for CEBAF Accelerator Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 424-426.
- R. C. McCrady, J. D. Gilpatrick, and H. A. Watkins, “Beam Position and Phase Monitors for the LANSCE Linac”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG016, pp. 59-61.
- A. Dehne, T. Hermes, N. Moeller, and R. Bacher, “MARWIN: A Mobile Autonomous Robot for Maintenance and Inspection”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 76-80.
- F. Long, “Status and Trends in Magnet Power Converter Technology for Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2822-2827.
- P. Plascjak et al., “The Operational Status of the National Institutes of Health Cyclotron Complex”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-25, pp. 685-688.
- S. K. Tian, Y. Jiao, N. Wang, and K. Ohmi, “Ion Instability Simulation in the HEPS Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4189-4191.
- F. Soubelet, ?û. Apsimon, T. H. B. Persson, R. Tom?ís Garc?¡a, and C. P. Welsch, “Supervised Machine Learning for Local Coupling Sources Detection in the LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1842-1845.
- Yu. A. Kubyshin et al., “Current Status of the 12 MeV UPC Race-Track Microtron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP112, pp. 2775-2777.
- L. Fernandez et al., “Front-End Software Architecture”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOPA04, pp. 310-312.
- V. Dokutovich, A. D. Chernyakin, and D. V. Senkov, “High-Voltage Power Supply for GOG-1001”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 587-588.
- S. P. Moeller, “ASTRID, A Storage Ring for Ions and Electrons”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 112-115.
- Z. Segalov, M. Reiser, J. Rodgers, W. W. Destler, and K. Ramaswamy, “High Power, High Brightness Electron Beam Generation in a Pulse-Line Driven Pseudospark Discharge”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 685-688.
- T. Zhang et al., “Numerical Investigations of Transverse Gradient Undulator Based Novel Light Sources”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO84, pp. 152-155.
- J. B. Rosenzweig, X. Ding, D. T. Palmer, C. Pellegrini, L. Serafini, and D. Yu, “Beam Dynamics in an Integrated Plane Wave Transformer Photoinjector at S- and X-Band”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V033, pp. 1968-1970.
- M. Kelly, “Status of superconducting spoke cavity development”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE302, pp. XX-XX.
- R. C. Kennedy and J. L. Adamski, “Spectrograph for Free Electron Laser Experiments”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3142-3145.
- J. T. M. Lyles et al., “RF Design and Operating Results for a New 201.25 MHz RF Power Amplifier for LANSCE”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP135, pp. 1091-1093.
- J. Hebling, G. Alm?ísi, J. A. F??l?Âp, M. I. Mechler, Z. Tibai, and Gy. T??th, “Simple Setups for Carrier-envelope-phase Stable Single-cycle Attosecond Pulse Generation”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO30, pp. 63-67.
- L. Staykov et al., “Commissioning of a New Emittance Measurement System at PITZ”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH067, pp. 474-476.
Back to search