Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. A. Maslov, M. Komel, and K. Zagar, “Device Control Database Tool (DCDB)”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO015, pp. 191-192.
[n] R. De Maria, R. Calaga, M. Giovannozzi, Y. Sun, R. Tom?ís, and F. Zimmermann, “High Beta Operation Scenarios for Crab Cavities in the Insertion Region 4 of the CERN Large Hadron Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC037, pp. 540-542.
[n] R. G. Eichhorn, N. A. Stilin, and W. Weingarten, “N-Doped Niobium Accelerating Cavities: Analyzing Model Applicability”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1014-1016. doi:10.18429/JACoW-LINAC2016-THPLR074
[n] S. H. Lee et al., “Design Study of Low-Level RF Control System for CW Superconducting Electron Linear Accelerator in KAERI”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 512-515. doi:10.18429/JACoW-NAPAC2019-TUPLH17
[n] C. Scafuri, “The FERMI@Elettra Online Modeling Toolkit”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP037, pp. 170-172.
[n] A. D. Kovalenko et al., “Design of a Fast Cycled Low Loss 6 T Model Dipole Cooling at 1.9 K”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4221-4223. doi:10.18429/JACoW-IPAC2019-THPTS053
[n] S. V. Davis, M. T. Heron, A. Oates, B. G. Martlew, and A. Quigley, “Principles of Status Control and Interlock Protection System for the SRS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP512, pp. XX-XX.
[n] H. L. Andrews et al., “An Investigation of Electron Beam Divergence from a Single DFEA Emitter Tip”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4662-4664. doi:10.18429/JACoW-IPAC2018-THPML007
[n] C. Madec et al., “Status of E-XFEL String and Cryomodule Assembly at CEA-Saclay”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB083, pp. 1017-1019.
[n] F. Zimmermann, “Precise Accelerator Models using Measurements with Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEZF102, pp. 141-145.
[n] J. L. Munoz et al., “RF Measurements and Numerical Simulations for the Model of the Bilbao Linac Double Spoke Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP042, pp. 886-888.
[n] J. Branlard et al., “LLRF Tests of XFEL Cryomodules at AMTF: First Experimental Results”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP087, pp. 1132-1134.
[n] A. H. Lumpkin, Y. L. Li, S. J. Pasky, and N. Sereno, “Observations on COTR Due to the Microbunching Instability in Compressed Beams”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC47, pp. 352-355.
[n] J. C. Guzman, “Status of the ASKAP Monitoring and Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRCAUST04, pp. 1349-1352.
[n] T. Katayama et al., “Status of Heavy Ion Cooler Synchrotron TARN II”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper C-05, pp. 76-79.
[n] M. M, K. A. Blokhina, A. M. Medvedev, and A. A. Starostenko, “FPGA-based Image Processing System for Electron Beam Welding Facility”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 239-241. doi:10.18429/JACoW-PCaPAC2018-FRCC1
[n] L. P. Sun, X. Du, Y. He, A. Shi, C. Zhang, and Z. L. Zhang, “Design of Re-Buncher Cavity for Heavy-ion LINAC in IMP”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB036, pp. 558-560.
[n] C. Reece, P. Kushnick, J. Mammosser, and T. Powers, “Production Vertical Cavity Pair Testing at CEBAF”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I12, pp. XX-XX.
[n] R. L. Sheffield, “An Electron Beam Diagnostic for the Los Alamos Free-Electron Laser Oscillator Experiment”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0039, pp. 436-438.
[n] M. Tanigaki et al., “Development of a Surveillance System with Motion Detection and Self-location Capability”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN010, pp. 257-259.
[n] B. Diviacco, R. Bracco, D. Millo, R. P. Walker, M. Zalateu, and D. Zangrando, “New Insertion Devices for ELETTRA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH011, pp. 2468-2470.
[n] J. A. Uythoven et al., “Results from the LHC Beam Dump Reliability Run”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP066, pp. 2671-2673.
[n] M. Titberidze et al., “First results on Femtosecond Level Photocathode Laser Synchronization at the SINBAD Facility”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 564-567. doi:10.18429/JACoW-IBIC2019-WEPP020
[n] E. Lecorche et al., “Overview of the Spiral2 Control System Progress”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU005, pp. 429-431.
[n] F. Hug, K. Aulenbacher, D. Simon, C. P. Stoll, and S. D. W. Thomas, “Beam Dynamics Layout of the MESA ERL”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 28-33. doi:10.18429/JACoW-ERL2019-TUCOXBS03
[n] D. Rogind, M. Boyes, and H. Shoaee, “SLAC LCLS-II Injector Source Controls and Early Injector Commissioning”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1340-1343. doi:10.18429/JACoW-ICALEPCS2017-THPHA002
[n] G. Bisoffi et al., “The Heidelberg Heavy Ion Cooler Storage Ring TSR”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 49-54.
[n] P. Emma et al., “Initial Commissioning Experience with the LCLS Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS049, pp. 1302-1304.
[n] P. K. Sigg, “A Variable, High Speed Beam-Power Absorber”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-05, pp. 212-215.
[n] B. S. C. Oswald, A. Adelmann, M. Bopp, and R. Geus, “Integration of a Large-Scale Eigenmode Solver into the ANSYS(c) Workflow Environment”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP16, pp. 122-123.
[n] J. C. Dooling, F. R. Brumwell, and G. E. McMichael, “The IPNS Accelerator 50 MeV and 500 MeV Transport Lines”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P001, pp. 156-158.
[n] C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1888-1891.
For LaTeX
Use Complete Form
For BibTeX
References
- P. A. Maslov, M. Komel, and K. Zagar, “Device Control Database Tool (DCDB)”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO015, pp. 191-192.
- R. De Maria, R. Calaga, M. Giovannozzi, Y. Sun, R. Tom?ís, and F. Zimmermann, “High Beta Operation Scenarios for Crab Cavities in the Insertion Region 4 of the CERN Large Hadron Collider”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC037, pp. 540-542.
- R. G. Eichhorn, N. A. Stilin, and W. Weingarten, “N-Doped Niobium Accelerating Cavities: Analyzing Model Applicability”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1014-1016.
- S. H. Lee et al., “Design Study of Low-Level RF Control System for CW Superconducting Electron Linear Accelerator in KAERI”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 512-515.
- C. Scafuri, “The FERMI@Elettra Online Modeling Toolkit”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP037, pp. 170-172.
- A. D. Kovalenko et al., “Design of a Fast Cycled Low Loss 6 T Model Dipole Cooling at 1.9 K”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4221-4223.
- S. V. Davis, M. T. Heron, A. Oates, B. G. Martlew, and A. Quigley, “Principles of Status Control and Interlock Protection System for the SRS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP512, pp. XX-XX.
- H. L. Andrews et al., “An Investigation of Electron Beam Divergence from a Single DFEA Emitter Tip”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4662-4664.
- C. Madec et al., “Status of E-XFEL String and Cryomodule Assembly at CEA-Saclay”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB083, pp. 1017-1019.
- F. Zimmermann, “Precise Accelerator Models using Measurements with Beam”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEZF102, pp. 141-145.
- J. L. Munoz et al., “RF Measurements and Numerical Simulations for the Model of the Bilbao Linac Double Spoke Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP042, pp. 886-888.
- J. Branlard et al., “LLRF Tests of XFEL Cryomodules at AMTF: First Experimental Results”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP087, pp. 1132-1134.
- A. H. Lumpkin, Y. L. Li, S. J. Pasky, and N. Sereno, “Observations on COTR Due to the Microbunching Instability in Compressed Beams”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC47, pp. 352-355.
- J. C. Guzman, “Status of the ASKAP Monitoring and Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRCAUST04, pp. 1349-1352.
- T. Katayama et al., “Status of Heavy Ion Cooler Synchrotron TARN II”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper C-05, pp. 76-79.
- M. M, K. A. Blokhina, A. M. Medvedev, and A. A. Starostenko, “FPGA-based Image Processing System for Electron Beam Welding Facility”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 239-241.
- L. P. Sun, X. Du, Y. He, A. Shi, C. Zhang, and Z. L. Zhang, “Design of Re-Buncher Cavity for Heavy-ion LINAC in IMP”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB036, pp. 558-560.
- C. Reece, P. Kushnick, J. Mammosser, and T. Powers, “Production Vertical Cavity Pair Testing at CEBAF”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I12, pp. XX-XX.
- R. L. Sheffield, “An Electron Beam Diagnostic for the Los Alamos Free-Electron Laser Oscillator Experiment”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0039, pp. 436-438.
- M. Tanigaki et al., “Development of a Surveillance System with Motion Detection and Self-location Capability”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN010, pp. 257-259.
- B. Diviacco, R. Bracco, D. Millo, R. P. Walker, M. Zalateu, and D. Zangrando, “New Insertion Devices for ELETTRA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH011, pp. 2468-2470.
- J. A. Uythoven et al., “Results from the LHC Beam Dump Reliability Run”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP066, pp. 2671-2673.
- M. Titberidze et al., “First results on Femtosecond Level Photocathode Laser Synchronization at the SINBAD Facility”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 564-567.
- E. Lecorche et al., “Overview of the Spiral2 Control System Progress”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU005, pp. 429-431.
- F. Hug, K. Aulenbacher, D. Simon, C. P. Stoll, and S. D. W. Thomas, “Beam Dynamics Layout of the MESA ERL”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 28-33.
- D. Rogind, M. Boyes, and H. Shoaee, “SLAC LCLS-II Injector Source Controls and Early Injector Commissioning”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1340-1343.
- G. Bisoffi et al., “The Heidelberg Heavy Ion Cooler Storage Ring TSR”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 49-54.
- P. Emma et al., “Initial Commissioning Experience with the LCLS Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS049, pp. 1302-1304.
- P. K. Sigg, “A Variable, High Speed Beam-Power Absorber”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-05, pp. 212-215.
- B. S. C. Oswald, A. Adelmann, M. Bopp, and R. Geus, “Integration of a Large-Scale Eigenmode Solver into the ANSYS(c) Workflow Environment”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP16, pp. 122-123.
- J. C. Dooling, F. R. Brumwell, and G. E. McMichael, “The IPNS Accelerator 50 MeV and 500 MeV Transport Lines”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P001, pp. 156-158.
- C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1888-1891.
Back to search