JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196. 
[n]	I. Reichel and A. Wolski, “Intrabeam Scattering Studies for the ILC Damping Rings Using a New Matlab Code”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH146, pp. 2266-2268. 
[n]	I. Reichel and A. Wolski, “Tracking Studies to Determine the Required Wiggler Aperture for the ILC Damping Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS137, pp. 879-881. 
[n]	S. Kersten et al., “Development of a Detector Control System for the ATLAS Pixel Detector”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT002, pp. XX-XX. 
[n]	A. Dhar et al., “High power RF testing of high temperature superconductors”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEAD2, unpublished. 
[n]	A. A. Vasilyev et al., “A Cyclotron Complex for Accelerating Multicharged Ions up to Relativistic Energies”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-17, pp. 2024-2029. 
[n]	M. Stirbet, J. Popielarski, T. L. Grimm, and M. Johnson, “RF Conditioning and Testing of Fundamental Power Couplers for the RIA Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP26, pp. 682-684. 
[n]	T. Bato, G. Thomas, and F. Varela, “A Model-driven Generator to Automate the Creation of HMIs for the CERN Gas Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1801-1805. doi:10.18429/JACoW-ICALEPCS2017-THPHA163
[n]	C. Matejcek, K. Aulenbacher, S. Friederich, and L. M. Hein, “Low Energy Beam Transport System for MESA”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 20-25. doi:10.18429/JACoW-ERL2017-MOPSPP008
[n]	J. H. Martin, D. Jovanovic, L. G. Lewis, E. G. Pewitt, W. Praeg, and V. J. Sevcik, “Zero Gradient Synchrotron Coil Failures in 1970-71 Analysis and Subsequent Remedial Action”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 729-731. 
[n]	J. de Lamare, A. Donaldson, A. Kulikov, and J. Lipari, “The PEP-II Abort Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P096, pp. 1316-1318. 
[n]	V. L. Granatstein et al., “Prospects for Developing Microwave Amplifiers to Drive Multi-TeV Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ17, pp. 1561-1562. 
[n]	L. M. Hein, K. Aulenbacher, V. Bechthold, M. A. Dehn, S. Friederich, and C. Matejcek, “SPOCK - a Triode DC Electron Gun With Variable Extraction Gradient”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 13-16. doi:10.18429/JACoW-ERL2017-MOPSPP006
[n]	C. S. Narug, M. Parise, and D. Passarelli, “Application of the ASME Boiler and Pressure Vessel Code in the Design of SRF Cavities at Fermilab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 460. doi:10.18429/JACoW-SRF2021-TUPCAV010
[n]	W.-D. M?Âller, P.-D. Gall, A. G?Âssel, V. Gubarev, and M. Pekeler, “The Superconducting Cavity Database for the TESLA Test Facility”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP017, pp. 207-210. 
[n]	A. J. Gonzalez and A. S. Plastun, “RF Chopper for Prebunched Radioactive Ion Beams”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 87-89. doi:10.18429/JACoW-HIAT2022-TUP08
[n]	S. C. Alverson, G. W. Brown, F.-J. Decker, S. Gilevich, and S. Vetter, “Installation of a Hot-Swappable Spare Injector Laser System for the SLAC Linac Coherent Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 163-166. doi:10.18429/JACoW-ICALEPCS2015-MOPGF032
[n]	R. Yoder and J. B. Rosenzweig, “A Slab-Symmetric Dielectric-Loaded Structure for High-Gradient Acceleration at THz”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG045, pp. 1533-1535. 
[n]	A. Dhar et al., “REBCO sample testing at high power X-band”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2772-2774. doi:10.18429/JACoW-IPAC2024-WEPS37
[n]	I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986. 
[n]	M. Awschalom, M. V. Isaila, and F. C. Shoemaker, “A Synchronization Pulse for the Princeton-Pennsylvania Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 74-76. 
[n]	N. L. Leicester et al., “Development and Testing of Split 6 GHz Cavities With Niobium Coatings”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 51-55. doi:10.18429/JACoW-SRF2023-MOPMB001
[n]	Y. Verma, M. Aggarwal, V. J. Joshi, and A. Sharma, “Characterization Study of a Button BPM with an Approach to Automated Measurements”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 233-236. doi:10.18429/JACoW-IBIC2020-THPP12
[n]	G. D'Alessandro et al., “Implementation of CERN Secondary Beam Lines T9 and T10 in BDSIM”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3746-3748. doi:10.18429/JACoW-IPAC2019-THPGW069
[n]	J. Karmakar et al., “Latest dark current studies of rf photocathode gun of Delhi Light Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM045, unpublished. 
[n]	A. Bishop, “Why Cybersecurity Should Not Be Left to the Experts”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEKPP01, pp. XX-XX. 
[n]	T. S. Mattison, R. L. Cassel, A. R. Donaldson, and G. Gross, “Fast and Reliable Kicker Magnets for the SLC Damping Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR06, pp. 1915-1917. 
[n]	R. D. Kohaupt, “Multi-Bunch Systems at DESY”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ32, pp. 2741-2741. 
[n]	K. Hwang and J. Qiang, “Numerical Shot Noise Modeling and Particle Migration Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4274-4276. doi:10.18429/JACoW-IPAC2018-THPMF084
[n]	S. A. Kahn, G. Flanagan, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “YBCO Conductor Technology for High Field Muon Cooling Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB055, pp. 394-396. 
[n]	W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 9-19. 
[n]	R. K. Jobe et al., “Position, Angle and Energy Stabilization for the SLC Positron Target and Arcs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 713-716. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search