Favourites
For Word
[n] D. H. Ha et al., “Design and Manufacture of 10 kW, 83.2 MHz 4-way Power Combiner for Solid State Amplifier”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 97-99. doi:10.18429/JACoW-CYCLOTRONS2019-MOP029
[n] J. Berg, “Choosing Cavity Voltages and Phases for the CBETA Multi-Pass Energy Recovery Linac”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL161, unpublished.
[n] S. C. Hartman, T. Shintake, and N. Akasaka, “Nanometer Resolution BPM Using Damped Slot Resonator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC29, pp. 2655-2657.
[n] M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
[n] J. Peng et al., “Beam Commissioning Results of the CSNS Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1223-1225. doi:10.18429/JACoW-IPAC2017-TUOBA1
[n] P. Piminov et al., “Y(1S)-meson rest mass measurement on the VEPP-4M collider”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 582-584. doi:10.18429/JACoW-IPAC2025-MOPM115
[n] T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318.
[n] O. Meshkov et al., “Development and testing of an autocorrelator for measuring the duration of picosecond pulses of near infrared radiation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3174-3176. doi:10.18429/JACoW-IPAC2025-THPS104
[n] J. S. L. Yap et al., “Tracking and LET Measurements with the MiniPIX-TimePIX Detector for 60 MeV Clinical Protons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1260-1263. doi:10.18429/JACoW-IPAC2021-MOPAB418
[n] V. H. Hardion, M. Lindberg, and D. P. Spruce, “The MAX IV Way of Agile Project Management for the Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1021. doi:10.18429/JACoW-ICALEPCS2019-WEMPL008
[n] A. Wrulich, “Optimization of the Accelerating Structures for the Superconducting Linear Accelerator of the Energy Amplifier”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W034, pp. 1188-1190.
[n] M. Checchin, A. Grassellino, M. Martinello, A. Romanenko, and J. Zasadzinski, “Mean Free Path Dependence of the Trapped Flux Surface Resistance”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB020, pp. 129-134.
[n] R. W. Thomae et al., “Low beta Ion Acceleration with the FOM-MEQALAC-System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3172-3175.
[n] M. Xiao, V. P. Nagaslaev, V. Sajaev, and A. Valishev, “Linear Lattice Modeling of the Recycler Ring at Fermilab”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH059, pp. 2056-2058.
[n] M. Parise, P. Duchesne, D. Longuevergne, D. Passarelli, and V. Roger, “Fabrication Experience of the Pre-Production PIP-II SSR2 Cavities at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 529-532. doi:10.18429/JACoW-LINAC2022-TUPOGE17
[n] D. E. Suddeth and G. J. Volk, “Intense Pulsed Neutron Source (IPNS-I) Accelerator 500 MeV Fast Kickers”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3024-3026.
For LaTeX
Use Complete Form
For BibTeX
References
- D. H. Ha et al., “Design and Manufacture of 10 kW, 83.2 MHz 4-way Power Combiner for Solid State Amplifier”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 97-99.
- J. Berg, “Choosing Cavity Voltages and Phases for the CBETA Multi-Pass Energy Recovery Linac”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL161, unpublished.
- S. C. Hartman, T. Shintake, and N. Akasaka, “Nanometer Resolution BPM Using Damped Slot Resonator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC29, pp. 2655-2657.
- M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
- J. Peng et al., “Beam Commissioning Results of the CSNS Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1223-1225.
- P. Piminov et al., “Y(1S)-meson rest mass measurement on the VEPP-4M collider”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM115, pp. 582-584.
- T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318.
- O. Meshkov et al., “Development and testing of an autocorrelator for measuring the duration of picosecond pulses of near infrared radiation”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS104, pp. 3174-3176.
- J. S. L. Yap et al., “Tracking and LET Measurements with the MiniPIX-TimePIX Detector for 60 MeV Clinical Protons”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1260-1263.
- V. H. Hardion, M. Lindberg, and D. P. Spruce, “The MAX IV Way of Agile Project Management for the Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1021.
- A. Wrulich, “Optimization of the Accelerating Structures for the Superconducting Linear Accelerator of the Energy Amplifier”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W034, pp. 1188-1190.
- M. Checchin, A. Grassellino, M. Martinello, A. Romanenko, and J. Zasadzinski, “Mean Free Path Dependence of the Trapped Flux Surface Resistance”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB020, pp. 129-134.
- R. W. Thomae et al., “Low beta Ion Acceleration with the FOM-MEQALAC-System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3172-3175.
- M. Xiao, V. P. Nagaslaev, V. Sajaev, and A. Valishev, “Linear Lattice Modeling of the Recycler Ring at Fermilab”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH059, pp. 2056-2058.
- M. Parise, P. Duchesne, D. Longuevergne, D. Passarelli, and V. Roger, “Fabrication Experience of the Pre-Production PIP-II SSR2 Cavities at Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 529-532.
- D. E. Suddeth and G. J. Volk, “Intense Pulsed Neutron Source (IPNS-I) Accelerator 500 MeV Fast Kickers”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3024-3026.
Back to search
