Favourites
For Word
[n] M. W. Poole et al., “Recent Developments in the DIAMOND Storage Ring Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH070, pp. 2611-2613.
[n] M. Xie, “On Analog Simulation of Ionization Cooling of Muons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH086, pp. 3879-3881.
[n] C. H. Chen et al., “Broadly Tunable THz FEL Amplifier”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP086, pp. 252-254.
[n] G. I. Batskich et al., “Proton Beam Acceleration up to 160 MeV at the Moscow Meson Factory Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3067-3070.
[n] L. T. Huang et al., “Test of the Tune Measurement System Based on BBQ at HLS-II Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4926-4928. doi:10.18429/JACoW-IPAC2018-THPML111
[n] M. E. Gruchalla, P. Chacon, J. D. Gilpatrick, D. Martinez, J. F. Power, and B. G. Smith, “LANSCE Wire Scanner AFE: Analysis, Design, and Fabrication”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM016, pp. 141-145.
[n] M.N. Sayeed, H. Elsayed-Ali, G. V. Eremeev, M. J. Kelley, C. E. Reece, and U. Pudasaini, “Magnetron Sputtering of Nb3Sn for SRF Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3946-3949. doi:10.18429/JACoW-IPAC2018-THPAL129
[n] N. R. Stevenson and W. J. Dickie, “Future Cyclotron Systems: An Industrial Perspective”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-15, pp. 581-584.
[n] I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
[n] H. Imsieke, A. Kholodnyi, and S. N. Simrock, “Time Delay Compensation for the Digital RF Control at the TESLA Test Facility”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4065, pp. 546-548.
[n] E. Gluskin et al., “The Ellipitical Multipole Wiggler Project”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ17, pp. 1426-1428.
[n] W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 64-66. doi:10.18429/JACoW-SRF2017-MOPB009
[n] L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
[n] D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
[n] M. J. Shirakata, H. Fujimori, Y. Irie, and T. Takayanagi, “BEAM TRACKING FOR J-PARC 3 GEV RCS INJECTION”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBZ02, pp. 253-255.
[n] P. Duval, P. K. Bartkiewicz, S. W. Herb, M. Lomperski, and S. Weisse, “TINE Release 4.1: Responding to the User's Needs”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOD002, pp. 31-33.
[n] P. Wanderer et al., “Study of Factors Which Affect Training in Isabelle R&D Magnets”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3208-3211.
[n] W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 366-369.
[n] Z. Mi et al., “Design and test of double spoke superconducting cavity tuner for CSNS-II”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 81-83. doi:10.18429/JACoW-LINAC2024-MOPB021
[n] W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 688-690. doi:10.18429/JACoW-LINAC2018-THPO006
[n] A. Eager and S. Doebert, “Simulations and experimental commissioning results of the AWAKE Run 2 photoinjector”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM004, unpublished.
[n] F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and A. Mj?©s, “Operation of an ECRIS Charge State Breeder at TRIUMF”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THYO01, pp. 163-166.
[n] I. Mases Solé, H. Bartosik, K. Paraschou, M. Schenk, and C. Zannini, “Bunch-by-bunch Tune Shift Studies for LHC-type Beams in the CERN SPS”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 194-198. doi:10.18429/JACoW-HB2023-WEA1C1
[n] W. Z. Gelbart and N. R. Stevenson, “Solid Targetry Systems: A Brief History”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-21, pp. 90-93.
[n] Y. E. Tan and R. B. Hogan, “Australian Synchrotron BPM Electronics Upgrade”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 297-299. doi:10.18429/JACoW-IBIC2018-TUPC01
[n] A. Febel, H. Gerke, M. Tigner, H. Wiedemann, and B. H. Wilk, “The Proposed Desy Proton-Electron Colliding Beam Experiment”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 782-786.
[n] R. H. Miller, C. H. Kim, and F. Selph, “Design of a Bunching System for a High-Intensity Electron LINAC”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 863-866.
[n] F. Willeke, “Dynamic Aperture, A Review of Theory and Experiment”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 219-224.
[n] I. J. Gillingham, T. Friedrich, S. C. Lay, and R. Mercado, “Experiences and Lessons Learned in Transitioning Beamline Front-Ends from VMEbus to Modular Distributed I/O”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 121-124. doi:10.18429/JACoW-ICALEPCS2015-MOPGF019
[n] S. I. Meigo, A. Akutsu, K. I. Ikezaki, M. Ooi, and H. Fujimori, “Beam Flattening System based on Non-linear Optics for High Power Spallation Neutron Target at J-PARC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 896-898. doi:10.18429/JACoW-IPAC2014-MOPRI116
[n] J.-K. Liao, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and S.-H. Lee, “Development of a new clock phase shifter for phase measurement at the TPS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM070, unpublished.
[n] T. Weis, “Injection Systems for High Current Ion Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 181-186.
[n] W. J. Gallagher, “High Average Beam Power Linac Waveguides”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1064-1067.
[n] H. Schieler et al., “First Experiences with the Control System for the Accelerator of ANKA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP4, pp. 658-660.
[n] V. Berland, H. Gerstenberg, D. Hagedorn, and F. Rodriguez-Mateos, “Annealing of Superconducting Magnet Protection Diodes for the LHC After Irradiation at Liquid Helium Temperatures”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP015G, pp. 2234-2236.
[n] C. Johnstone and N. Mokhov, “Shielding the Muon Collider Interaction Region”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W030, pp. 414-416.
[n] W. Bialowons et al., “Computer Simulations of the Wake Field Transformer Experiment at DESY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 902-905.
[n] F. Galluccio and F. Schmidt, “Slow Particle Loss in Hadron Colliders”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 640-643.
[n] M. Kuntzsch et al., “Upgrade of the ELBE Timing System”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 446-448. doi:10.18429/JACoW-IBIC2023-WEP043
[n] R. Bacher, P. Duval, and P. K. Bartkiewicz, “The Run-Time Customization of Java Rich Clients with the COMA Class”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA19, pp. 126-128.
[n] M. Boland et al., “Design of a new S-band 250 MeV electron linac with RF SLED compression for the CLS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1981-1984. doi:10.18429/JACoW-IPAC2023-TUPL108
[n] R. A. Erickson, E. Guerra, M. Stanek, Z. Van Hoover, and J. Warren, “A New Control Room for SLAC Accelerators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR029, pp. 4029-4031.
[n] S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
[n] J. Zhai et al., “High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB072, unpublished.
[n] H. H. Lu et al., “A Permanent Magnet Phase Shifter for the European-XFEL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH047, pp. 356-358.
[n] D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
[n] P. Miller et al., “Performance of the K1200 Cyclotron at MSU”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-17, pp. 86-89.
[n] J. L. Lemaire, A. Compant La Fontaine, A. Godefroy, D. Guilhem, P. Leclerc, and J. Y. Salmon, “A New Diagnostic for the Measurement of the Ionic Emission Generated by an Electron-Photon Conversion Target”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH087, pp. 1411-1413.
[n] P. A. Zavodszky et al., “Design, Construction and Commissioning of the SuSI ECR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB03, pp. 3766-3770.
[n] L. Wroe et al., “Accelerator design choices for a compact, electron-driven, pulsed neutron source”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 21-24. doi:10.18429/JACoW-LINAC2024-MOAA004
[n] R. R. Johnson, W. Z. Gelbart, F. M. Nortier, N. R. Stevenson, J. Orzechowski, and F. Cifarelli, “High Current Radioisotope Production with Solid Target System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3099-3102.
[n] P. Duval, P. K. Bartkiewicz, S. W. Herb, M. Lomperski, and S. Weisse, “TINE Release 4.1: Responding to the User's Needs”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP034, pp. 736-738.
[n] F. H. Tseng, H.-P. Chang, M.-S. Chiu, and S. J. Huang, “TPS Commissioning Exercise Performed on the TLS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 307-309. doi:10.18429/JACoW-IPAC2014-MOPRO094
[n] N. Fuster-Martinez et al., “Aperture Measurements with AC Dipole at the Large Hadron Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 212-215. doi:10.18429/JACoW-IPAC2018-MOPMF048
[n] D. T. Tinta et al., “Precise Generation and Distribution System of RF Reference Signal for SKIF Accelerator Complex”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper THB01, unpublished.
[n] A. P. Lee et al., “Operation of the NSRRC 2998 MHz Photo-cathode RF Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA058, pp. 2247-2249.
[n] A. J. Bevan et al., “Combined Phase Space Characterization at the PEP-II IP using Single-beam and Luminous-region Measurements”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS050, pp. 655-657.
[n] J. L. Finney, “Condensed Matter Research using Particle Beams”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 203-208.
[n] R. Geller, “ECR Source Scaling Concepts”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1088-1093.
[n] R. W. Hamm, K. R. Crandall, M. E. Hamm, L. D. Hansborough, and J. M. Potter, “A Compact Proton Linac for Positron Tomography”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-42, pp. 141-143.
[n] G. Guignard and J. Hagel, “Beam Characteristics versus Cavity Models in CLIC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B009, pp. 458-460.
[n] P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
[n] A. Piwinski, “Penetration of the Field of a Bunched Beam through a Ceramic Vacuum Chamber with Metallic Coating”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1364-1367.
[n] A. I. Drozhdin et al., “Beam Loss, Residual Radiation, and Collimation and Shielding in the Fermilab Booster”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH053, pp. 2569-2571.
[n] K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363.
For LaTeX
Use Complete Form
For BibTeX
References
- M. W. Poole et al., “Recent Developments in the DIAMOND Storage Ring Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH070, pp. 2611-2613.
- M. Xie, “On Analog Simulation of Ionization Cooling of Muons”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH086, pp. 3879-3881.
- C. H. Chen et al., “Broadly Tunable THz FEL Amplifier”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP086, pp. 252-254.
- G. I. Batskich et al., “Proton Beam Acceleration up to 160 MeV at the Moscow Meson Factory Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3067-3070.
- L. T. Huang et al., “Test of the Tune Measurement System Based on BBQ at HLS-II Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4926-4928.
- M. E. Gruchalla, P. Chacon, J. D. Gilpatrick, D. Martinez, J. F. Power, and B. G. Smith, “LANSCE Wire Scanner AFE: Analysis, Design, and Fabrication”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM016, pp. 141-145.
- M.N. Sayeed, H. Elsayed-Ali, G. V. Eremeev, M. J. Kelley, C. E. Reece, and U. Pudasaini, “Magnetron Sputtering of Nb3Sn for SRF Cavities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3946-3949.
- N. R. Stevenson and W. J. Dickie, “Future Cyclotron Systems: An Industrial Perspective”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-15, pp. 581-584.
- I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
- H. Imsieke, A. Kholodnyi, and S. N. Simrock, “Time Delay Compensation for the Digital RF Control at the TESLA Test Facility”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4065, pp. 546-548.
- E. Gluskin et al., “The Ellipitical Multipole Wiggler Project”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ17, pp. 1426-1428.
- W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 64-66.
- L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
- D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
- M. J. Shirakata, H. Fujimori, Y. Irie, and T. Takayanagi, “BEAM TRACKING FOR J-PARC 3 GEV RCS INJECTION”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBZ02, pp. 253-255.
- P. Duval, P. K. Bartkiewicz, S. W. Herb, M. Lomperski, and S. Weisse, “TINE Release 4.1: Responding to the User's Needs”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOD002, pp. 31-33.
- P. Wanderer et al., “Study of Factors Which Affect Training in Isabelle R&D Magnets”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3208-3211.
- W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 366-369.
- Z. Mi et al., “Design and test of double spoke superconducting cavity tuner for CSNS-II”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 81-83.
- W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 688-690.
- A. Eager and S. Doebert, “Simulations and experimental commissioning results of the AWAKE Run 2 photoinjector”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM004, this conference.
- F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and A. Mj?©s, “Operation of an ECRIS Charge State Breeder at TRIUMF”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper THYO01, pp. 163-166.
- I. Mases Solé, H. Bartosik, K. Paraschou, M. Schenk, and C. Zannini, “Bunch-by-bunch Tune Shift Studies for LHC-type Beams in the CERN SPS”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA1C1, pp. 194-198.
- W. Z. Gelbart and N. R. Stevenson, “Solid Targetry Systems: A Brief History”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-21, pp. 90-93.
- Y. E. Tan and R. B. Hogan, “Australian Synchrotron BPM Electronics Upgrade”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 297-299.
- A. Febel, H. Gerke, M. Tigner, H. Wiedemann, and B. H. Wilk, “The Proposed Desy Proton-Electron Colliding Beam Experiment”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 782-786.
- R. H. Miller, C. H. Kim, and F. Selph, “Design of a Bunching System for a High-Intensity Electron LINAC”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 863-866.
- F. Willeke, “Dynamic Aperture, A Review of Theory and Experiment”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 219-224.
- I. J. Gillingham, T. Friedrich, S. C. Lay, and R. Mercado, “Experiences and Lessons Learned in Transitioning Beamline Front-Ends from VMEbus to Modular Distributed I/O”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 121-124.
- S. I. Meigo, A. Akutsu, K. I. Ikezaki, M. Ooi, and H. Fujimori, “Beam Flattening System based on Non-linear Optics for High Power Spallation Neutron Target at J-PARC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 896-898.
- J.-K. Liao, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and S.-H. Lee, “Development of a new clock phase shifter for phase measurement at the TPS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM070, this conference.
- T. Weis, “Injection Systems for High Current Ion Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 181-186.
- W. J. Gallagher, “High Average Beam Power Linac Waveguides”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1064-1067.
- H. Schieler et al., “First Experiences with the Control System for the Accelerator of ANKA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP4, pp. 658-660.
- V. Berland, H. Gerstenberg, D. Hagedorn, and F. Rodriguez-Mateos, “Annealing of Superconducting Magnet Protection Diodes for the LHC After Irradiation at Liquid Helium Temperatures”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP015G, pp. 2234-2236.
- C. Johnstone and N. Mokhov, “Shielding the Muon Collider Interaction Region”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W030, pp. 414-416.
- W. Bialowons et al., “Computer Simulations of the Wake Field Transformer Experiment at DESY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 902-905.
- F. Galluccio and F. Schmidt, “Slow Particle Loss in Hadron Colliders”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 640-643.
- M. Kuntzsch et al., “Upgrade of the ELBE Timing System”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP043, pp. 446-448.
- R. Bacher, P. Duval, and P. K. Bartkiewicz, “The Run-Time Customization of Java Rich Clients with the COMA Class”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA19, pp. 126-128.
- M. Boland et al., “Design of a new S-band 250 MeV electron linac with RF SLED compression for the CLS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL108, pp. 1981-1984.
- R. A. Erickson, E. Guerra, M. Stanek, Z. Van Hoover, and J. Warren, “A New Control Room for SLAC Accelerators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR029, pp. 4029-4031.
- S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
- J. Zhai et al., “High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB072, unpublished.
- H. H. Lu et al., “A Permanent Magnet Phase Shifter for the European-XFEL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH047, pp. 356-358.
- D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
- P. Miller et al., “Performance of the K1200 Cyclotron at MSU”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-17, pp. 86-89.
- J. L. Lemaire, A. Compant La Fontaine, A. Godefroy, D. Guilhem, P. Leclerc, and J. Y. Salmon, “A New Diagnostic for the Measurement of the Ionic Emission Generated by an Electron-Photon Conversion Target”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH087, pp. 1411-1413.
- P. A. Zavodszky et al., “Design, Construction and Commissioning of the SuSI ECR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRXAB03, pp. 3766-3770.
- L. Wroe et al., “Accelerator design choices for a compact, electron-driven, pulsed neutron source”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 21-24.
- R. R. Johnson, W. Z. Gelbart, F. M. Nortier, N. R. Stevenson, J. Orzechowski, and F. Cifarelli, “High Current Radioisotope Production with Solid Target System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3099-3102.
- P. Duval, P. K. Bartkiewicz, S. W. Herb, M. Lomperski, and S. Weisse, “TINE Release 4.1: Responding to the User's Needs”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP034, pp. 736-738.
- F. H. Tseng, H.-P. Chang, M.-S. Chiu, and S. J. Huang, “TPS Commissioning Exercise Performed on the TLS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 307-309.
- N. Fuster-Martinez et al., “Aperture Measurements with AC Dipole at the Large Hadron Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 212-215.
- D. T. Tinta et al., “Precise Generation and Distribution System of RF Reference Signal for SKIF Accelerator Complex”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper THB01, unpublished.
- A. P. Lee et al., “Operation of the NSRRC 2998 MHz Photo-cathode RF Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA058, pp. 2247-2249.
- A. J. Bevan et al., “Combined Phase Space Characterization at the PEP-II IP using Single-beam and Luminous-region Measurements”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS050, pp. 655-657.
- J. L. Finney, “Condensed Matter Research using Particle Beams”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 203-208.
- R. Geller, “ECR Source Scaling Concepts”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1088-1093.
- R. W. Hamm, K. R. Crandall, M. E. Hamm, L. D. Hansborough, and J. M. Potter, “A Compact Proton Linac for Positron Tomography”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-42, pp. 141-143.
- G. Guignard and J. Hagel, “Beam Characteristics versus Cavity Models in CLIC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5B009, pp. 458-460.
- P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
- A. Piwinski, “Penetration of the Field of a Bunched Beam through a Ceramic Vacuum Chamber with Metallic Coating”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1364-1367.
- A. I. Drozhdin et al., “Beam Loss, Residual Radiation, and Collimation and Shielding in the Fermilab Booster”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH053, pp. 2569-2571.
- K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 360-363.
Back to search