Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
[n] C. Bloomer, L. Bobb, W. Freund, J. Gr??nert, J. Liu, and M. E. Newton, “XFEL Photon Pulse Measurement Using an All-Carbon Diamond Detector”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 416-420. doi:10.18429/JACoW-IBIC2022-WEP15
[n] P. Li et al., “Beam Loss Simulation and Gas Desorption Measurement for HIAF”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 159-161. doi:10.18429/JACoW-SAP2017-TUPH23
[n] W. Fischer and F. Schmidt, “Precise Determination and Comparision of the SPS Dynamic Aperture in Experiment and Simulation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG07, pp. 2768-2770.
[n] X. Wang, Y. Sun, G. Su, and Y. Ma and Sh, “DESIGN AND CONSTRUCTION OF A 7MW HIGH POWER CIRCULATOR”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP066, pp. XX-XX.
[n] H. Schmickler, “Beam Position Measurement System Design”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 618-624. doi:10.18429/JACoW-IBIC2015-THALA01
[n] R. G. Jacobsen and T. Mattison, “Beam-Loss Monitors in the SLC Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1539-1542.
[n] C. Bloomer, L. Bobb, and M. E. Newton, “100Hz X-ray Beam Profile Measurements from a Transmissive CVD Diamond Detector”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 387-391. doi:10.18429/JACoW-IBIC2023-WEP021
[n] M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1163-1166.
[n] S. K. Esin et al., “Linear Accelerator for Production of Radioactive Beams”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-70, pp. 808-810.
[n] H. D. Lancaster, S. B. Magyary, and R. C. Sah, “A High Performance Control System for a Heavy Ion Medical Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2311-2314.
[n] H. Yoshikawa et al., “Design of High Current Injector for SPring-8”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-59, pp. 775-777.
[n] J. Kewisch et al., “Accelerator Simulation and Operation Via Identical Operational Interfaces”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1443-1446.
[n] S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
[n] L. W. Lai, F. Z. Chen, Y. B. Leng, Y. B. Yan, N. Zhang, and J. Chen, “Design and Performance of Digital BPM Processor for DCLS and SXFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 338-340. doi:10.18429/JACoW-IPAC2017-MOPAB092
[n] V. V. Parkhomchuk et al., “Status of the 2.5 MeV Electron Cooling System for NICA Collider”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 35-38. doi:10.18429/JACoW-RUPAC2018-TUCBMH02
[n] V. Zakutin, A. Dovbnya, and N. G. Reshetnyak, “Modes of Electron Beam Generation in a Magnetron Diode with a Secondary-Emission Cathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP028, pp. 2027-2028.
[n] A. H. Lumpkin and B. X. Yang, “Commissioning Results of the APS Storage Ring Photon Monitor Systems”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO04A, pp. 343-345.
[n] K.-J. Kim, “Analysis of Optical Stochastic Cooling Including Transverse Effects”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG13, pp. 2786-2788.
[n] G. K. Sahoo, F. Brinker, and F. Wedtstein, “Orbitkorrektur, a Java Client for Transverse Orbit Correction in PETRA-III”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 120-122. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO22
[n] K. P. Mondal et al., “Epitaxial growth of cesium potassium antimonide photocathode”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC44, unpublished.
[n] A. Marsili, R. Bruce, F. Cerutti, L. S. Esposito, and S. Redaelli, “Multi-turn Tracking of Collision Products at the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 166-169. doi:10.18429/JACoW-IPAC2014-MOPRO041
[n] U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1257-1260.
For LaTeX
Use Complete Form
For BibTeX
References
- B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
- C. Bloomer, L. Bobb, W. Freund, J. Gr??nert, J. Liu, and M. E. Newton, “XFEL Photon Pulse Measurement Using an All-Carbon Diamond Detector”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 416-420.
- P. Li et al., “Beam Loss Simulation and Gas Desorption Measurement for HIAF”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 159-161.
- W. Fischer and F. Schmidt, “Precise Determination and Comparision of the SPS Dynamic Aperture in Experiment and Simulation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG07, pp. 2768-2770.
- X. Wang, Y. Sun, G. Su, and Y. Ma and Sh, “DESIGN AND CONSTRUCTION OF A 7MW HIGH POWER CIRCULATOR”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP066, pp. XX-XX.
- H. Schmickler, “Beam Position Measurement System Design”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 618-624.
- R. G. Jacobsen and T. Mattison, “Beam-Loss Monitors in the SLC Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1539-1542.
- C. Bloomer, L. Bobb, and M. E. Newton, “100Hz X-ray Beam Profile Measurements from a Transmissive CVD Diamond Detector”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP021, pp. 387-391.
- M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1163-1166.
- S. K. Esin et al., “Linear Accelerator for Production of Radioactive Beams”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-70, pp. 808-810.
- H. D. Lancaster, S. B. Magyary, and R. C. Sah, “A High Performance Control System for a Heavy Ion Medical Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2311-2314.
- H. Yoshikawa et al., “Design of High Current Injector for SPring-8”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-59, pp. 775-777.
- J. Kewisch et al., “Accelerator Simulation and Operation Via Identical Operational Interfaces”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1443-1446.
- S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
- L. W. Lai, F. Z. Chen, Y. B. Leng, Y. B. Yan, N. Zhang, and J. Chen, “Design and Performance of Digital BPM Processor for DCLS and SXFEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 338-340.
- V. V. Parkhomchuk et al., “Status of the 2.5 MeV Electron Cooling System for NICA Collider”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 35-38.
- V. Zakutin, A. Dovbnya, and N. G. Reshetnyak, “Modes of Electron Beam Generation in a Magnetron Diode with a Secondary-Emission Cathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP028, pp. 2027-2028.
- A. H. Lumpkin and B. X. Yang, “Commissioning Results of the APS Storage Ring Photon Monitor Systems”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEO04A, pp. 343-345.
- K.-J. Kim, “Analysis of Optical Stochastic Cooling Including Transverse Effects”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG13, pp. 2786-2788.
- G. K. Sahoo, F. Brinker, and F. Wedtstein, “Orbitkorrektur, a Java Client for Transverse Orbit Correction in PETRA-III”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 120-122.
- K. P. Mondal et al., “Epitaxial growth of cesium potassium antimonide photocathode”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC44, unpublished.
- A. Marsili, R. Bruce, F. Cerutti, L. S. Esposito, and S. Redaelli, “Multi-turn Tracking of Collision Products at the LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 166-169.
- U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1257-1260.
Back to search