Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Bassato et al., “A Beam Profiler and Emittance Meter for the SPES Project at INFN-LNL”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS035, pp. 412-414.
[n] R. Nagaoka, “Impact of Resistive-Wall Wake Fields Generated by Low-Gap Chambers on the Beam at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH126, pp. 3531-3533.
[n] S. B. van der Geer, M. J. de Loos, A. D. Brynes, P. H. Williams, I. D. Setija, and P. W. Smorenburg, “GPT-CSR: a New Simulation Code for CSR Effects”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3414-3417. doi:10.18429/JACoW-IPAC2018-THPAK078
[n] P. Kneisel, “Progress on large grain and single grain niobium - ingots and sheet and review of progress on large grain and single grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TH102, pp. XX-XX.
[n] A. Galat?á et al., “Towards the First Beams from the ADIGE Injector for the SPES Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3647-3649. doi:10.18429/JACoW-IPAC2019-THPGW030
[n] A. D. Palczewski et al., “Rework Recipe Development, Analysis and Results of Select 9-Cell Cavities for LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3968-3971. doi:10.18429/JACoW-IPAC2018-THPAL140
[n] M. G. Giacchini et al., “The Control System of SPES Target: Current Status and Perspectives.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP086, pp. 278-280.
[n] K. Artoos et al., “Study of the Stabilization to the Nanometer Level of Mechanical Vibrations of the CLIC Main Beam Quadrupoles”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP080, pp. 3633-3635.
[n] D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3517-3520. doi:10.18429/JACoW-IPAC2017-WEPVA108
[n] E. Malandain and P. Skarek, “An Expert System for Accelerator Fault Diagnosis”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 559-562.
[n] E. Laface, Y. I. Levinsen, and T. A. Pelaia II, “Comparing the Transverse Dynamics of the ESS Linac Simulator and the Spallation Neutron Source Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3314-3316. doi:10.18429/JACoW-IPAC2016-THPMB037
[n] B. Salvachua et al., “Handling 1 MW Losses with the LHC Collimation System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 174-177. doi:10.18429/JACoW-IPAC2014-MOPRO043
[n] J.-L. Bouly et al., “Recent Developments in ECR Ion Sources”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-3, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Bassato et al., “A Beam Profiler and Emittance Meter for the SPES Project at INFN-LNL”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS035, pp. 412-414.
- R. Nagaoka, “Impact of Resistive-Wall Wake Fields Generated by Low-Gap Chambers on the Beam at the ESRF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH126, pp. 3531-3533.
- S. B. van der Geer, M. J. de Loos, A. D. Brynes, P. H. Williams, I. D. Setija, and P. W. Smorenburg, “GPT-CSR: a New Simulation Code for CSR Effects”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3414-3417.
- P. Kneisel, “Progress on large grain and single grain niobium - ingots and sheet and review of progress on large grain and single grain niobium cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TH102, pp. XX-XX.
- A. Galat?á et al., “Towards the First Beams from the ADIGE Injector for the SPES Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3647-3649.
- A. D. Palczewski et al., “Rework Recipe Development, Analysis and Results of Select 9-Cell Cavities for LCLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3968-3971.
- M. G. Giacchini et al., “The Control System of SPES Target: Current Status and Perspectives.”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP086, pp. 278-280.
- K. Artoos et al., “Study of the Stabilization to the Nanometer Level of Mechanical Vibrations of the CLIC Main Beam Quadrupoles”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP080, pp. 3633-3635.
- D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3517-3520.
- E. Malandain and P. Skarek, “An Expert System for Accelerator Fault Diagnosis”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 559-562.
- E. Laface, Y. I. Levinsen, and T. A. Pelaia II, “Comparing the Transverse Dynamics of the ESS Linac Simulator and the Spallation Neutron Source Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3314-3316.
- B. Salvachua et al., “Handling 1 MW Losses with the LHC Collimation System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 174-177.
- J.-L. Bouly et al., “Recent Developments in ECR Ion Sources”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper G-3, pp. XX-XX.
Back to search