Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Yunn, “A Beam Breakup Instability in a Recirculating Linac Caused by a Quadrupole Mode”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG033, pp. 3246-3248.
[n] C. Ekdahl et al., “First Beam at DARHT-II”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC008, pp. 558-562.
[n] G. R. Murdoch et al., “An Overview of the SNS Accelerator Mechanical Engineering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS140, pp. 1831-1833.
[n] F. M. Bieniosek et al., “Charge Stripper and MEBT for the $^3$He RFQ Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P111, pp. 3837-3839.
[n] C. H. Chang et al., “The Commissioning Results of 1 m Prototype EPU5.6 in SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP33G, pp. 2225-2227.
[n] C. L. Bohn, D. R. Douglas, G. A. Krafft, R. Li, Ph. Piot, and B. C. Yunn, “Emittance and Energy Spread Studies in the Jefferson Lab Free-electron Laser”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B14, pp. 1546-1548.
[n] B. Dehning et al., “First Experience with the LHC Beam Loss Monitoring System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP034, pp. 3522-3524.
[n] M. Burns et al., “A Flat-Cathode Thermionic Injector for the PHERMEX Radiographic Facility”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3055-3058.
[n] A. O. Borga, R. De Monte, M. Ferianis, L. Pavlovic, and M. Predonzani, “The Diagnostics' Back-End Platform Based on the In House Developed A|D|A And A|D|O Boards”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM025, pp. 163-167.
[n] W. Lin et al., “AGS booster beam-based main quadrupole transfer function measurements”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4436-4439. doi:10.18429/JACoW-IPAC2023-THPL009
[n] F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
[n] D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
[n] C. Adolphsen et al., “Pulse to Pulse Stability Issues in the SLC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG11, pp. 646-648.
[n] F.-Z. Hsiao et al., “The Liquid Helium Cryogenic System for the Superconducting Cavity in SRRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH162, pp. 1604-1606.
[n] R. J. Burke, “Telescoping Beams for Heavy Ion Fusion”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3092-3095.
[n] M. Fakhari, Y.-K. Kan, F. X. K?ñrtner, N. H. Matlis, and M. Vahdani, “Start-to-End Simulations of a THz-Driven ICS Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 631-633. doi:10.18429/JACoW-IPAC2022-MOPOMS005
[n] K. Hanawa et al., “RADIOACTIVE BEAM PROJECT AT HIMAC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THAU04, pp. XX-XX.
[n] K. A. Brown et al., “Coulomb Crystals in Storage Rings for Quantum Information Science”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 296-301. doi:10.18429/JACoW-NAPAC2022-TUYE1
[n] R. Holtzapple, F.-J. Decker, A. S. Fisher, and M. Sullivan, “Observation of Beam Size Flip-Flop in PEP-II”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI011, pp. 410-412.
[n] R. Gerig, C. Moore, and S. Pruss, “Measurement and Compensation of Coherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2486-2488.
[n] H. Huang et al., “A p-Carbon CNI Polarimeter for RHIC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAR5, pp. 471-473.
[n] D. Xu, B. Podobedov, Y.-K. Kan, and Y. Luo, “Impact of electron beam size ripple on proton emittance growth for EIC”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 467-471. doi:10.18429/JACoW-NAPAC2025-TUP050
[n] J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
[n] F.-J. Decker, Y. Cai, M. Sullivan, J. L. Turner, U. Wienands, and W. Kozanecki, “bit Distortions and Bumps in the PEP-II LER Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI009, pp. 389-391.
[n] S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2206-2209.
[n] M. Ferianis et al., “The Fermi@Elettra Cavity BPM System: Description and Commissioning Results”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOOC03, pp. 26-28.
[n] T. Limberg, Ph. Piot, and F. Stulle, “Design and Performance Simulation of the TTF-FEL II Bunch Compression System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI049, pp. 811-813.
[n] F.-J. Decker, R. Holtzapple, A. Kulikov, and M. Sullivan, “Increasing the Number of Bunches in PEP-II”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI010, pp. 392-394.
[n] A. S. Fisher et al., “Design of an X-ray Imaging System for the Low-Energy Ring of PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT154, pp. 2819-2821.
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, M. Harvey, J. Morris, and R. H. Olsen, “A New Simulation Timing System for Software Testing in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 306. doi:10.18429/JACoW-ICALEPCS2019-MOPHA046
[n] R. Gerig, C. Moore, and S. Pruss, “Measurement of Incoherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2488-2491.
[n] T. Winkler et al., “Status of the Quadrupole Doublet Module Series Manfacturing”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2388-2390. doi:10.18429/JACoW-IPAC2021-TUPAB372
[n] A. Aslam, M. Babzien, and S. Biedron, “Applications of Machine Learning in Photo-Cathode Injectors”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 441-442. doi:10.18429/JACoW-NAPAC2022-TUPA41
[n] Y.-K. Kan and D. Xu, “A GPU-parallelized weak-strong beam-beam simulation code in Julia programming language”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP005, unpublished.
[n] N. Stapley and W. Sliwinski, “Applying Agile Project Management for Accelerator Controls Software”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB05, pp. 612-614.
[n] D. Wang et al., “Impedance analysis for the ALS-U kickers”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1139-1142. doi:10.18429/JACoW-IPAC2025-TUPB090
[n] D. J. Wang, S. Y. Perng, H. C. Ho, T. C. Tseng, and C. K. Kuan, “New Magnet Girder Design in the NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14003, pp. XX-XX.
[n] P. Lv et al., “The FORTRESS Beamline at Tsinghua University”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1990-1992. doi:10.18429/JACoW-IPAC2024-WEPC16
[n] Y.-K. Kan and D. Xu, “Beam-beam fields with full six-dimensional coupling: Theory and computational methods”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP013, unpublished.
[n] A. Aslam, M. Babzien, S. Biedron, and T. Bolin, “Applications of machine learning in ultrafast laser control”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1862-1864. doi:10.18429/JACoW-IPAC2024-TUPS77
[n] A. Kechler, E. Feldmeier, Th. Haberer, A. Peters, and C. Sch?Âmers, “An Intensity Measurement Method based on Inorganic Scintillators and Optoelectronic Sensors”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3518-3520. doi:10.18429/JACoW-IPAC2014-THPME120
For LaTeX
Use Complete Form
For BibTeX
References
- B. Yunn, “A Beam Breakup Instability in a Recirculating Linac Caused by a Quadrupole Mode”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG033, pp. 3246-3248.
- C. Ekdahl et al., “First Beam at DARHT-II”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC008, pp. 558-562.
- G. R. Murdoch et al., “An Overview of the SNS Accelerator Mechanical Engineering”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS140, pp. 1831-1833.
- F. M. Bieniosek et al., “Charge Stripper and MEBT for the $^3$He RFQ Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P111, pp. 3837-3839.
- C. H. Chang et al., “The Commissioning Results of 1 m Prototype EPU5.6 in SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP33G, pp. 2225-2227.
- C. L. Bohn, D. R. Douglas, G. A. Krafft, R. Li, Ph. Piot, and B. C. Yunn, “Emittance and Energy Spread Studies in the Jefferson Lab Free-electron Laser”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B14, pp. 1546-1548.
- B. Dehning et al., “First Experience with the LHC Beam Loss Monitoring System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP034, pp. 3522-3524.
- M. Burns et al., “A Flat-Cathode Thermionic Injector for the PHERMEX Radiographic Facility”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3055-3058.
- A. O. Borga, R. De Monte, M. Ferianis, L. Pavlovic, and M. Predonzani, “The Diagnostics' Back-End Platform Based on the In House Developed A|D|A And A|D|O Boards”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM025, pp. 163-167.
- W. Lin et al., “AGS booster beam-based main quadrupole transfer function measurements”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL009, pp. 4436-4439.
- F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
- D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
- C. Adolphsen et al., “Pulse to Pulse Stability Issues in the SLC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG11, pp. 646-648.
- F.-Z. Hsiao et al., “The Liquid Helium Cryogenic System for the Superconducting Cavity in SRRC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH162, pp. 1604-1606.
- R. J. Burke, “Telescoping Beams for Heavy Ion Fusion”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3092-3095.
- M. Fakhari, Y.-K. Kan, F. X. K?ñrtner, N. H. Matlis, and M. Vahdani, “Start-to-End Simulations of a THz-Driven ICS Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 631-633.
- K. Hanawa et al., “RADIOACTIVE BEAM PROJECT AT HIMAC”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THAU04, pp. XX-XX.
- K. A. Brown et al., “Coulomb Crystals in Storage Rings for Quantum Information Science”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 296-301.
- R. Holtzapple, F.-J. Decker, A. S. Fisher, and M. Sullivan, “Observation of Beam Size Flip-Flop in PEP-II”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI011, pp. 410-412.
- R. Gerig, C. Moore, and S. Pruss, “Measurement and Compensation of Coherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2486-2488.
- H. Huang et al., “A p-Carbon CNI Polarimeter for RHIC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAR5, pp. 471-473.
- D. Xu, B. Podobedov, Y.-K. Kan, and Y. Luo, “Impact of electron beam size ripple on proton emittance growth for EIC”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 467-471.
- J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
- F.-J. Decker, Y. Cai, M. Sullivan, J. L. Turner, U. Wienands, and W. Kozanecki, “bit Distortions and Bumps in the PEP-II LER Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI009, pp. 389-391.
- S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2206-2209.
- M. Ferianis et al., “The Fermi@Elettra Cavity BPM System: Description and Commissioning Results”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOOC03, pp. 26-28.
- T. Limberg, Ph. Piot, and F. Stulle, “Design and Performance Simulation of the TTF-FEL II Bunch Compression System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI049, pp. 811-813.
- F.-J. Decker, R. Holtzapple, A. Kulikov, and M. Sullivan, “Increasing the Number of Bunches in PEP-II”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI010, pp. 392-394.
- A. S. Fisher et al., “Design of an X-ray Imaging System for the Low-Energy Ring of PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT154, pp. 2819-2821.
- Y. Gao, T. G. Robertazzi, K. A. Brown, M. Harvey, J. Morris, and R. H. Olsen, “A New Simulation Timing System for Software Testing in Collider-Accelerator Control Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 306.
- R. Gerig, C. Moore, and S. Pruss, “Measurement of Incoherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2488-2491.
- T. Winkler et al., “Status of the Quadrupole Doublet Module Series Manfacturing”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2388-2390.
- A. Aslam, M. Babzien, and S. Biedron, “Applications of Machine Learning in Photo-Cathode Injectors”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 441-442.
- Y.-K. Kan and D. Xu, “A GPU-parallelized weak-strong beam-beam simulation code in Julia programming language”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUP005, unpublished.
- N. Stapley and W. Sliwinski, “Applying Agile Project Management for Accelerator Controls Software”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB05, pp. 612-614.
- D. Wang et al., “Impedance analysis for the ALS-U kickers”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB090, pp. 1139-1142.
- D. J. Wang, S. Y. Perng, H. C. Ho, T. C. Tseng, and C. K. Kuan, “New Magnet Girder Design in the NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14003, pp. XX-XX.
- P. Lv et al., “The FORTRESS Beamline at Tsinghua University”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC16, pp. 1990-1992.
- Y.-K. Kan and D. Xu, “Beam-beam fields with full six-dimensional coupling: Theory and computational methods”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUP013, unpublished.
- A. Aslam, M. Babzien, S. Biedron, and T. Bolin, “Applications of machine learning in ultrafast laser control”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS77, pp. 1862-1864.
- A. Kechler, E. Feldmeier, Th. Haberer, A. Peters, and C. Sch?Âmers, “An Intensity Measurement Method based on Inorganic Scintillators and Optoelectronic Sensors”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3518-3520.
Back to search