Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 274-277. doi:10.18429/JACoW-Cyclotrons2016-THA02
[n] E. C. Raka, “Damping Bunch Shape Oscillations in the Brookhaven AGS”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 182-187.
[n] Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1592-1595.
[n] E. D. van Garderen et al., “Newly Installed Beam Diagnostics at the Australian Synchrotron”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD07, pp. 47-49.
[n] M. Guijarro et al., “BLISS - Experiments Control for ESRF EBS Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1060-1066. doi:10.18429/JACoW-ICALEPCS2017-WEBPL05
[n] G. Lopez, “Constant of Motion and Dynamic Equations for One Dimensional Autonomous System, and Radiation Damping”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 392-395.
[n] R. E. Pollock, “IUCF Cooler Ring Status 1989”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 17-22.
[n] J. Staples et al., “A Wider?Âe Pre-Accelerator for the Superhilac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B05, pp. 81-85.
[n] R. E. Laxdal et al., “First Beam Test with the ISAC Separated Function DTL”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD16, pp. 244-246.
[n] M. J. Lee, “Transient Beam Loading in Standing Wave Linacs”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper B-7, pp. 108-113.
[n] R. Wang and B. Shao, “A Diagnostic System for Measuring Profile of the Beam Lines”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-07, pp. 298-300.
[n] Y. S. Cho, J. M. Han, W. S. Park, B. H. Choi, B. S. Han, and K. H. Chung, “Conceptual Design Study of KOMAC DTL”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D008, pp. 92-94.
[n] R. Ainsworth, P. Adamson, K. J. Hazelwood, I. Kourbanis, and E. G. Stern, “Simulations and Measurements of Stopbands in the Fermilab Recycler”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 864-866. doi:10.18429/JACoW-IPAC2016-MOPOY010
[n] C. Rubbia, “The 'Future' in High-Energy Physics”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 290-300.
[n] A. Y. Murokh et al., “Development of High Resolution Beam Profile Imaging Diagnostics”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF12, pp. 526-526.
[n] R. Nagaoka et al., “Transverse Feedback Development at SOLEIL”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC04, pp. 316-318.
[n] N. Simos et al., “Concept Design of the Target/Horn System for the BNL Neutrino Oscillation Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB044, pp. 1709-1711.
[n] H. Jiang et al., “Macroparticle Simulation Studies of a Beam-core Matching Experiment”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO042, pp. 3860-3862.
[n] N. Krupka, K. Escherich, M. Habermann, K. Harries, A. Matheisen, and B. Petersen, “Quality Control Update of the Cleanroom for Superconducting Multi Cell Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP13, pp. 483-485.
[n] B. S. Han, W. G. Kang, S. M. Kim, N. K. Kuksanov, and R. A. Salimov, “High Voltage ELV Accelerators for Industrial Application (Family of Accelerators and Tendency of Development)”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRBCH03, pp. 227-229.
[n] M. R. Kraimer, M. Rivers, and E. Norum, “EPICS Asynchronous Driver Support”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_074.
[n] Ph. Gayet et al., “First Operational Experience in Running a New 6 kW Cryoplant Cooling Superconducting Cavities in LEP at 4.5 K”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I17, pp. XX-XX.
[n] J. Bahrdt, A. Gaupp, G. Ingold, M. Scheer, and G. Wuestefeld, “A Double Undulator for the Production of Circularly Polarized Light at BESSY II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP003G, pp. 2538-2540.
[n] W. Joho, M. Olivo, T. Stammbach, and H. Willax, “The SIN Accelerators, Operational Experience, and Improvement Programs”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1618-1622.
[n] C. P. Sargent, W. Turchinetz, and J. N. Weaver, “Bates Linac Operational Experience”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1341-1343.
[n] J. O'Hara et al., “Intense Proton Core and Halo Beam Profile Measurement: Beam Line Component Mechanical Design”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC14, pp. 181-183.
[n] T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
[n] S. Schaller et al., “The LANSCE RICE Control System Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE013, pp. 2354-2356.
[n] M. Vadai, A. Alomainy, and H. Damerau, “Barrier Bucket Studies in the CERN PS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1128-1131. doi:10.18429/JACoW-IPAC2019-MOPTS106
[n] P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_002.
[n] T. K. Yang et al., “Status of Beam Diagnostics at KHIMA Facility”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 126-130. doi:10.18429/JACoW-IBIC2015-MOPB038
[n] N. Simos, K. Brown, H. G. Kirk, R. Prigl, and K. T. McDonald, “Thermal Shock Analysis of Windows Interacting with Energetic, Focused Beam of the BNL Muon Target Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH085, pp. 1408-1410.
[n] T. Junquera, N. R. Chevalier, J. P. Thermeau, L. Medeiros-Romao, D. Vandeplassche, and H. Saugnac, “Preliminary Studies of the Cryogenic Refrigerator and Distribution Systems for the MYRRHA Proton Linac”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP081, pp. 331-333.
[n] R. S. Livingston, “Introductory Comments”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 787-788.
[n] R. J. Nawrocky, M. Li, O. V. Singh, and L. H. Yu, “An Automatic Beam Steering System for the NSLS X-17T Beam Line Using Closed Orbit Feedback”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 512-515.
[n] R. F. Lambiase, B. Oerter, S. Peng, and J. Smith, “Power Supply Control and Monitoring for the SNS Ring and Transport System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH005, pp. 3666-3668.
[n] H. H. Lee et al., “A Simulation for the Optimization of Bremsstrahlung Radiation for Nuclear Applications Using Laser Accelerated Electron Beam”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB13, pp. 618-621.
[n] S. Chen and G. Lopez, “Simulation of the Transverse Dipole Mode Multibunch Instability for the SSC Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3255-3258.
[n] R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 848-851. doi:10.18429/JACoW-IPAC2019-MOPTS006
[n] D. El Khechen, P. Bambade, D. Jehanno, and C. Rimbault, “Fast Luminosity Monitoring using Diamond Sensors for the Super Flavor Factory SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3442-3444. doi:10.18429/JACoW-IPAC2014-THPME090
[n] M. Dehnel and T. Stewart, “AN INDUSTRIAL CYCLOTRON ION SOURCE & INJECTION SYSTEM”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P18, pp. XX-XX.
[n] M. Battiaz, M. Harold, G. Suberlucq, and H. H. Umstuetter, “A Strong Focusing Bending Magnet for the CERN Antiproton Collector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1532-1535.
[n] K. Siemek et al., “Realization of Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 496-498. doi:10.18429/JACoW-RUPAC2016-WEPSB059
[n] M. Stampfer and P. Elleaume, “A 4T Superconducting Wiggler for the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2316-2319.
[n] R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 500-503.
[n] P. Mandrillon et al., “Progress of the Feasibility Studies of the European Light Ion Medical Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1790-1793.
[n] N. Tsoupas et al., “Uniform Beam Distributions at the Target of the NSRL Beam Transfer Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS102, pp. 3720-3722.
[n] J. H. Lee, J. H. Han, J. H. Hong, C. H. Kim, I. S. Ko, and S. J. Lee, “Laser Heater System Test at PAL-XFEL ITF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3048-3050. doi:10.18429/JACoW-IPAC2016-WEPOY028
[n] Y. Wang, A. H. Regan, T. S. Rohlev, M. Prokop, and D. Thomson, “SNS Superconducting Cavity Modeling: Iterative Learning Control”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC13, pp. 521-523.
[n] R. Grewe et al., “Nitrogen Bake-out Procedures at the Vertical High-Temperature UHV-Furnace of the S-DALINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3937-3939. doi:10.18429/JACoW-IPAC2018-THPAL126
[n] D. A. Dohan and N. D. Arnold, “Connection-Oriented Relational Database of the APS Control System Hardware”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE001, pp. 2327-2329.
[n] L. Celona et al., “Commissioning of the AISHa Ion Source at INFN-LNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 570-572. doi:10.18429/JACoW-IPAC2017-MOPIK032
[n] D. Fernandez, M. Ounsy, and C. Scafuri, “The Tango collaboration Status and some of the latest developments”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_006.
[n] J. M. Vogt, J. C. Bergstrom, and S. Hu, “Accurate Measurement of the Beam Energy in the CLS Storage Ring”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL004, pp. 36-37.
[n] M. Poelker et al., “Status of High Polarization DC High Voltage GaAs Photoguns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB01, pp. 3756-3760.
[n] J. A. Rodriguez et al., “30 GHz High-Gradient Accelerating Structure Test Results”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC01, pp. 3818-3820.
[n] L. P. Robertson, E. G. Auld, G. H. Mackenzie, and A. J. Otter, “Extraction of Multiple Beams of Various Energies from the TRIUMF Negative Ion Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C10, pp. XX-XX.
[n] D. K. Olsen et al., “Invited Paper: Status Report for the Holifield Radioactive Ion Beam Facility”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper M-02, pp. 634-643.
[n] D. B. Hopkins et al., “Design and Fabrication of 33 GHz High-Gradient Accelerator Sections”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1157-1160.
For LaTeX
Use Complete Form
For BibTeX
References
- J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 274-277.
- E. C. Raka, “Damping Bunch Shape Oscillations in the Brookhaven AGS”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 182-187.
- Y. Chung et al., “Closed Orbit Feedback with Digital Signal Processing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1592-1595.
- E. D. van Garderen et al., “Newly Installed Beam Diagnostics at the Australian Synchrotron”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD07, pp. 47-49.
- M. Guijarro et al., “BLISS - Experiments Control for ESRF EBS Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1060-1066.
- G. Lopez, “Constant of Motion and Dynamic Equations for One Dimensional Autonomous System, and Radiation Damping”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 392-395.
- R. E. Pollock, “IUCF Cooler Ring Status 1989”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 17-22.
- J. Staples et al., “A Wider?Âe Pre-Accelerator for the Superhilac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B05, pp. 81-85.
- R. E. Laxdal et al., “First Beam Test with the ISAC Separated Function DTL”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD16, pp. 244-246.
- M. J. Lee, “Transient Beam Loading in Standing Wave Linacs”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper B-7, pp. 108-113.
- R. Wang and B. Shao, “A Diagnostic System for Measuring Profile of the Beam Lines”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-07, pp. 298-300.
- Y. S. Cho, J. M. Han, W. S. Park, B. H. Choi, B. S. Han, and K. H. Chung, “Conceptual Design Study of KOMAC DTL”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D008, pp. 92-94.
- R. Ainsworth, P. Adamson, K. J. Hazelwood, I. Kourbanis, and E. G. Stern, “Simulations and Measurements of Stopbands in the Fermilab Recycler”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 864-866.
- C. Rubbia, “The 'Future' in High-Energy Physics”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 290-300.
- A. Y. Murokh et al., “Development of High Resolution Beam Profile Imaging Diagnostics”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF12, pp. 526-526.
- R. Nagaoka et al., “Transverse Feedback Development at SOLEIL”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC04, pp. 316-318.
- N. Simos et al., “Concept Design of the Target/Horn System for the BNL Neutrino Oscillation Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB044, pp. 1709-1711.
- H. Jiang et al., “Macroparticle Simulation Studies of a Beam-core Matching Experiment”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO042, pp. 3860-3862.
- N. Krupka, K. Escherich, M. Habermann, K. Harries, A. Matheisen, and B. Petersen, “Quality Control Update of the Cleanroom for Superconducting Multi Cell Cavities at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP13, pp. 483-485.
- B. S. Han, W. G. Kang, S. M. Kim, N. K. Kuksanov, and R. A. Salimov, “High Voltage ELV Accelerators for Industrial Application (Family of Accelerators and Tendency of Development)”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRBCH03, pp. 227-229.
- M. R. Kraimer, M. Rivers, and E. Norum, “EPICS Asynchronous Driver Support”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_074.
- Ph. Gayet et al., “First Operational Experience in Running a New 6 kW Cryoplant Cooling Superconducting Cavities in LEP at 4.5 K”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I17, pp. XX-XX.
- J. Bahrdt, A. Gaupp, G. Ingold, M. Scheer, and G. Wuestefeld, “A Double Undulator for the Production of Circularly Polarized Light at BESSY II”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP003G, pp. 2538-2540.
- W. Joho, M. Olivo, T. Stammbach, and H. Willax, “The SIN Accelerators, Operational Experience, and Improvement Programs”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1618-1622.
- C. P. Sargent, W. Turchinetz, and J. N. Weaver, “Bates Linac Operational Experience”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1341-1343.
- J. O'Hara et al., “Intense Proton Core and Halo Beam Profile Measurement: Beam Line Component Mechanical Design”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC14, pp. 181-183.
- T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
- S. Schaller et al., “The LANSCE RICE Control System Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE013, pp. 2354-2356.
- M. Vadai, A. Alomainy, and H. Damerau, “Barrier Bucket Studies in the CERN PS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1128-1131.
- P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O1_002.
- T. K. Yang et al., “Status of Beam Diagnostics at KHIMA Facility”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 126-130.
- N. Simos, K. Brown, H. G. Kirk, R. Prigl, and K. T. McDonald, “Thermal Shock Analysis of Windows Interacting with Energetic, Focused Beam of the BNL Muon Target Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH085, pp. 1408-1410.
- T. Junquera, N. R. Chevalier, J. P. Thermeau, L. Medeiros-Romao, D. Vandeplassche, and H. Saugnac, “Preliminary Studies of the Cryogenic Refrigerator and Distribution Systems for the MYRRHA Proton Linac”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP081, pp. 331-333.
- R. S. Livingston, “Introductory Comments”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 787-788.
- R. J. Nawrocky, M. Li, O. V. Singh, and L. H. Yu, “An Automatic Beam Steering System for the NSLS X-17T Beam Line Using Closed Orbit Feedback”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 512-515.
- R. F. Lambiase, B. Oerter, S. Peng, and J. Smith, “Power Supply Control and Monitoring for the SNS Ring and Transport System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH005, pp. 3666-3668.
- H. H. Lee et al., “A Simulation for the Optimization of Bremsstrahlung Radiation for Nuclear Applications Using Laser Accelerated Electron Beam”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPB13, pp. 618-621.
- S. Chen and G. Lopez, “Simulation of the Transverse Dipole Mode Multibunch Instability for the SSC Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3255-3258.
- R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 848-851.
- D. El Khechen, P. Bambade, D. Jehanno, and C. Rimbault, “Fast Luminosity Monitoring using Diamond Sensors for the Super Flavor Factory SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3442-3444.
- M. Dehnel and T. Stewart, “AN INDUSTRIAL CYCLOTRON ION SOURCE & INJECTION SYSTEM”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P18, pp. XX-XX.
- M. Battiaz, M. Harold, G. Suberlucq, and H. H. Umstuetter, “A Strong Focusing Bending Magnet for the CERN Antiproton Collector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1532-1535.
- K. Siemek et al., “Realization of Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 496-498.
- M. Stampfer and P. Elleaume, “A 4T Superconducting Wiggler for the ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2316-2319.
- R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 500-503.
- P. Mandrillon et al., “Progress of the Feasibility Studies of the European Light Ion Medical Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1790-1793.
- N. Tsoupas et al., “Uniform Beam Distributions at the Target of the NSRL Beam Transfer Line”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS102, pp. 3720-3722.
- J. H. Lee, J. H. Han, J. H. Hong, C. H. Kim, I. S. Ko, and S. J. Lee, “Laser Heater System Test at PAL-XFEL ITF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3048-3050.
- Y. Wang, A. H. Regan, T. S. Rohlev, M. Prokop, and D. Thomson, “SNS Superconducting Cavity Modeling: Iterative Learning Control”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUC13, pp. 521-523.
- R. Grewe et al., “Nitrogen Bake-out Procedures at the Vertical High-Temperature UHV-Furnace of the S-DALINAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3937-3939.
- D. A. Dohan and N. D. Arnold, “Connection-Oriented Relational Database of the APS Control System Hardware”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE001, pp. 2327-2329.
- L. Celona et al., “Commissioning of the AISHa Ion Source at INFN-LNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 570-572.
- D. Fernandez, M. Ounsy, and C. Scafuri, “The Tango collaboration Status and some of the latest developments”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_006.
- J. M. Vogt, J. C. Bergstrom, and S. Hu, “Accurate Measurement of the Beam Energy in the CLS Storage Ring”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL004, pp. 36-37.
- M. Poelker et al., “Status of High Polarization DC High Voltage GaAs Photoguns”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRXAB01, pp. 3756-3760.
- J. A. Rodriguez et al., “30 GHz High-Gradient Accelerating Structure Test Results”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBC01, pp. 3818-3820.
- L. P. Robertson, E. G. Auld, G. H. Mackenzie, and A. J. Otter, “Extraction of Multiple Beams of Various Energies from the TRIUMF Negative Ion Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C10, pp. XX-XX.
- D. K. Olsen et al., “Invited Paper: Status Report for the Holifield Radioactive Ion Beam Facility”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper M-02, pp. 634-643.
- D. B. Hopkins et al., “Design and Fabrication of 33 GHz High-Gradient Accelerator Sections”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1157-1160.
Back to search