Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Mayoral, M. Garc?¡a, D. L??pez, F. Ogando, J. Sanz, and P. Sauvan, “Beam Stop of Spiral2 Facility: Activation and Residual Dose Rate Calculations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP003, pp. 811-813.
[n] Ph. Gayet et al., “First Operational Experience in Running a New 6 kW Cryoplant Cooling Superconducting Cavities in LEP at 4.5 K”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I17, pp. XX-XX.
[n] N. Simos et al., “Concept Design of the Target/Horn System for the BNL Neutrino Oscillation Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB044, pp. 1709-1711.
[n] M. W. Poole et al., “4GLS - a New Type of Fourth Generation Light Source Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC004, pp. 189-191.
[n] N. Krupka, K. Escherich, M. Habermann, K. Harries, A. Matheisen, and B. Petersen, “Quality Control Update of the Cleanroom for Superconducting Multi Cell Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP13, pp. 483-485.
[n] M. Takao, S. Hashimoto, S. Sasaki, and Y. Miyahara, “Analytical Formulation of a Quasi-periodic Undulator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ21, pp. 1438-1440.
[n] D. M. Dykes and B. Taylor, “Development of a High Power RF System for the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3475-3478.
[n] M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
[n] D. Walsh, W. Okell, T. Pacey, and E. Snedden, “Demonstration of an electro-optic spectral interferometry longitudinal profile monitor at Clara”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4855-4858. doi:10.18429/JACoW-IPAC2023-THPL171
[n] Q. Qin et al., “Luminosity Enhancement and Performance in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ012, pp. 3708-3710.
[n] R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 500-503.
[n] T. Junquera, N. R. Chevalier, J. P. Thermeau, L. Medeiros-Romao, D. Vandeplassche, and H. Saugnac, “Preliminary Studies of the Cryogenic Refrigerator and Distribution Systems for the MYRRHA Proton Linac”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP081, pp. 331-333.
[n] E. Vogel et al., “SRF Gun Development at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 105-108. doi:10.18429/JACoW-LINAC2018-MOPO037
[n] H. Tanaka, “Beam Dynamics in a CW Microtron for Industrial Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A01, pp. 1005-1007.
[n] A. D. Alarcon, “The Development of the Undulator Controls Module at the Linac Coherent Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP092, pp. 293-294.
[n] T. Lefevre, “Overview of the CLIC Beam Instrumentation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC139, pp. 1350-1352.
[n] E. Rossa, N. Adams, J.-M. Roth, and F. Tomasini, “Double Sweep Streak Camera for LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 783-786.
[n] G. Moreno et al., “Effect of High-Magnetic Field Region Geometry on the Efficiency of a 750 MHz IH Structure”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 150-153. doi:10.18429/JACoW-LINAC2022-MOPOGE05
[n] H. J. Choi et al., “About BPMS to be Used for PAL-XFEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC25, pp. 112-115.
[n] D. M. Dykes, A. Jackson, and B. Taylor, “Breakdown and Resonance Behaviour of the SRS Waveguide”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3481-3484.
[n] M. Takao, “Impact of Betatron Motion on Path Lengthening and Momentum Aperture in a Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC072, pp. 3152-3154.
[n] M. A. Plum, A. A. Browman, D. Brown, D. M. Lee, and C. W. McCabe, “Fail-Safe Ion Chamber Errant Beam Detector Tailored for Personnel Protection”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1556-1559.
[n] B. Fernandez Adiego, E. Blanco Vinuela, and I. Prieto Barreiro, “UNICOS CPC6: Automated Code Generation for Process Control Applications”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS033, pp. 871-874.
[n] A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1007-1011. doi:10.18429/JACoW-ICALEPCS2017-TUSH303
[n] G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 931-934.
[n] N. Nishimori, H. Tanaka, and T. Watanabe, “A Highly Brilliant Compact 3 GeV Light Source Project in Japan”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1478-1481. doi:10.18429/JACoW-IPAC2019-TUPGW035
[n] K. Foraz et al., “Scheduling the Powering Tests”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP010, pp. 2545-2547.
[n] M. Zerlauth et al., “The LHC Post Mortem Analysis Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP021, pp. 131-133.
[n] A. Jakob, K. Reidelbach, J. Pozimski, R. D, and H. Klein, “Diagnostic of the Compensation Process of Ion Beams with a Time-Resolving Ion Energy Spectrometer”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P016, pp. 246-248.
[n] R. P. Johnson, R. J. Abrams, M. A. Cummings, and T. J. Roberts, “Production and Collection of He-3 and Other Valuable Isotopes using Mu*STAR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 527-529. doi:10.18429/JACoW-IPAC2018-MOPML054
[n] H. R. Schneider and H. Lancaster, “Improved Field Stability in RFQ Structures with Vane Coupling Rings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3007-3010.
[n] W. Butcher et al., “Experimental investigation into supersonic gas jet induced beam perturbation”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 399-403. doi:10.18429/JACoW-IBIC2025-TUPCO18
[n] N. Tsoupas, E. Rodger, J. Claus, H. W. Foelsche, and P. Wanderer, “Design and B-field Measurements of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP11, pp. 1352-1354.
[n] J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
[n] K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
[n] J. P. Holzbauer, D. Passarelli, and Y. M. Pischalnikov, “Testing of SSR1 Production Tuner for PIP-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2681-2683. doi:10.18429/JACoW-IPAC2018-WEPML005
[n] Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864.
[n] O. Gal, M. Abs, J.-M. Capdevila, F. Genin, Y. Jongen, and A. Nguyen, “Optical Properties of the Rhodotron Bending Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1048-1051.
[n] C. Eckardt et al., “The S-DALINAC Polarized Injector SPIN - Performance and Results”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP019, pp. 853-855.
[n] P. Chu et al., “XAL Adoption Experience at LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP012, pp. 117-119.
[n] E. E. Schmidt et al., “Magnetic Field Data on Fermilab Energy Saver Quadrupoles”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3384-3387.
[n] S. H. Kim et al., “The Fast Interlock Controller for High Power Pulse Modulator at PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3561-3563. doi:10.18429/JACoW-IPAC2016-THPMW012
[n] C. Benvenuti et al., “Niobium Sputter-Coated Copper Resonators”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D24, pp. 1028-1037.
[n] J. M. Mosthaf, Th. Haberer, S. Hanke, K. H?â, and A. Peters, “Status Update for the HIT Accelerator Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1409-1411. doi:10.18429/JACoW-ICALEPCS2017-THPHA028
[n] J. I. M. Botman, T. A. M. Derksen, H. Fiedler, H. L. Hagedoorn, C. J. Timmermans, and Y. J. E. Wintraecken, “An Irradiation Production Unit for Polymer Research”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP048G, pp. 2699-2701.
[n] P. A. Lin, K. H. Hsu, C. K. Kuan, C.-S. Lin, H. Y. Lin, and I. C. Sheng, “Manufacturing and Inspecting Supporting Tables for Front End in Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4031-4033. doi:10.18429/JACoW-IPAC2014-THPRI108
[n] M. E. Read, V. Granatstein, L. Ives, W. Lawson, G. Miram, and G. Nusinovich, “A Magnetron Injection Gun with Inverted Geometry for an 80 MW Gyroklystron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE027, pp. 1140-1141.
[n] A. Chan et al., “The PEP-II Project-Wide Database”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR18, pp. 840-842.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Mayoral, M. Garc?¡a, D. L??pez, F. Ogando, J. Sanz, and P. Sauvan, “Beam Stop of Spiral2 Facility: Activation and Residual Dose Rate Calculations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP003, pp. 811-813.
- Ph. Gayet et al., “First Operational Experience in Running a New 6 kW Cryoplant Cooling Superconducting Cavities in LEP at 4.5 K”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I17, pp. XX-XX.
- N. Simos et al., “Concept Design of the Target/Horn System for the BNL Neutrino Oscillation Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB044, pp. 1709-1711.
- M. W. Poole et al., “4GLS - a New Type of Fourth Generation Light Source Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC004, pp. 189-191.
- N. Krupka, K. Escherich, M. Habermann, K. Harries, A. Matheisen, and B. Petersen, “Quality Control Update of the Cleanroom for Superconducting Multi Cell Cavities at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP13, pp. 483-485.
- M. Takao, S. Hashimoto, S. Sasaki, and Y. Miyahara, “Analytical Formulation of a Quasi-periodic Undulator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ21, pp. 1438-1440.
- D. M. Dykes and B. Taylor, “Development of a High Power RF System for the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3475-3478.
- M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566.
- D. Walsh, W. Okell, T. Pacey, and E. Snedden, “Demonstration of an electro-optic spectral interferometry longitudinal profile monitor at Clara”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL171, pp. 4855-4858.
- Q. Qin et al., “Luminosity Enhancement and Performance in BEPCII”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ012, pp. 3708-3710.
- R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 500-503.
- T. Junquera, N. R. Chevalier, J. P. Thermeau, L. Medeiros-Romao, D. Vandeplassche, and H. Saugnac, “Preliminary Studies of the Cryogenic Refrigerator and Distribution Systems for the MYRRHA Proton Linac”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP081, pp. 331-333.
- E. Vogel et al., “SRF Gun Development at DESY”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 105-108.
- H. Tanaka, “Beam Dynamics in a CW Microtron for Industrial Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A01, pp. 1005-1007.
- A. D. Alarcon, “The Development of the Undulator Controls Module at the Linac Coherent Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP092, pp. 293-294.
- T. Lefevre, “Overview of the CLIC Beam Instrumentation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC139, pp. 1350-1352.
- E. Rossa, N. Adams, J.-M. Roth, and F. Tomasini, “Double Sweep Streak Camera for LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 783-786.
- G. Moreno et al., “Effect of High-Magnetic Field Region Geometry on the Efficiency of a 750 MHz IH Structure”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 150-153.
- H. J. Choi et al., “About BPMS to be Used for PAL-XFEL”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC25, pp. 112-115.
- D. M. Dykes, A. Jackson, and B. Taylor, “Breakdown and Resonance Behaviour of the SRS Waveguide”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3481-3484.
- M. Takao, “Impact of Betatron Motion on Path Lengthening and Momentum Aperture in a Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC072, pp. 3152-3154.
- M. A. Plum, A. A. Browman, D. Brown, D. M. Lee, and C. W. McCabe, “Fail-Safe Ion Chamber Errant Beam Detector Tailored for Personnel Protection”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1556-1559.
- B. Fernandez Adiego, E. Blanco Vinuela, and I. Prieto Barreiro, “UNICOS CPC6: Automated Code Generation for Process Control Applications”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS033, pp. 871-874.
- A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1007-1011.
- G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 931-934.
- N. Nishimori, H. Tanaka, and T. Watanabe, “A Highly Brilliant Compact 3 GeV Light Source Project in Japan”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1478-1481.
- K. Foraz et al., “Scheduling the Powering Tests”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP010, pp. 2545-2547.
- M. Zerlauth et al., “The LHC Post Mortem Analysis Framework”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP021, pp. 131-133.
- A. Jakob, K. Reidelbach, J. Pozimski, R. D, and H. Klein, “Diagnostic of the Compensation Process of Ion Beams with a Time-Resolving Ion Energy Spectrometer”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P016, pp. 246-248.
- R. P. Johnson, R. J. Abrams, M. A. Cummings, and T. J. Roberts, “Production and Collection of He-3 and Other Valuable Isotopes using Mu*STAR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 527-529.
- H. R. Schneider and H. Lancaster, “Improved Field Stability in RFQ Structures with Vane Coupling Rings”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3007-3010.
- W. Butcher et al., “Experimental investigation into supersonic gas jet induced beam perturbation”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 399-403.
- N. Tsoupas, E. Rodger, J. Claus, H. W. Foelsche, and P. Wanderer, “Design and B-field Measurements of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP11, pp. 1352-1354.
- J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
- K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
- J. P. Holzbauer, D. Passarelli, and Y. M. Pischalnikov, “Testing of SSR1 Production Tuner for PIP-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2681-2683.
- Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864.
- O. Gal, M. Abs, J.-M. Capdevila, F. Genin, Y. Jongen, and A. Nguyen, “Optical Properties of the Rhodotron Bending Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1048-1051.
- C. Eckardt et al., “The S-DALINAC Polarized Injector SPIN - Performance and Results”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP019, pp. 853-855.
- P. Chu et al., “XAL Adoption Experience at LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP012, pp. 117-119.
- E. E. Schmidt et al., “Magnetic Field Data on Fermilab Energy Saver Quadrupoles”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3384-3387.
- S. H. Kim et al., “The Fast Interlock Controller for High Power Pulse Modulator at PAL-XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3561-3563.
- C. Benvenuti et al., “Niobium Sputter-Coated Copper Resonators”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D24, pp. 1028-1037.
- J. M. Mosthaf, Th. Haberer, S. Hanke, K. H?â, and A. Peters, “Status Update for the HIT Accelerator Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1409-1411.
- J. I. M. Botman, T. A. M. Derksen, H. Fiedler, H. L. Hagedoorn, C. J. Timmermans, and Y. J. E. Wintraecken, “An Irradiation Production Unit for Polymer Research”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP048G, pp. 2699-2701.
- P. A. Lin, K. H. Hsu, C. K. Kuan, C.-S. Lin, H. Y. Lin, and I. C. Sheng, “Manufacturing and Inspecting Supporting Tables for Front End in Taiwan Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4031-4033.
- M. E. Read, V. Granatstein, L. Ives, W. Lawson, G. Miram, and G. Nusinovich, “A Magnetron Injection Gun with Inverted Geometry for an 80 MW Gyroklystron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE027, pp. 1140-1141.
- A. Chan et al., “The PEP-II Project-Wide Database”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR18, pp. 840-842.
Back to search