Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. A. Sahai et al., “Nanoplasmonic Accelerators Towards Tens of TeraVolts per Meter Gradients Using Nanomaterials”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 574-577. doi:10.18429/JACoW-IPAC2021-MOPAB168
[n] A. De Santis et al., “DANE Luminosity Monitor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 338-340. doi:10.18429/JACoW-IPAC2018-MOPMF089
[n] J. M. Byrd et al., “Broadband Self-amplified Spontaneous Coherent Synchrotron Radiation in a Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI019, pp. 659-661.
[n] F. Becker, “Beam Induced Fluorescence Monitors”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOD01, pp. 575-579.
[n] A. V. Smirnov, “Far-Field Acceleration Scheme”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP17G, pp. 824-826.
[n] M. A. Green et al., “Lessons Learned for the MICE Coupling Solenoid from the MICE Spectrometer Solenoids”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB060, pp. 406-408.
[n] C. Omet, P. J. Spiller, and J. Stadlmann, “Simulation of Dynamic Vacuum Induced Beam Loss”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH078, pp. 211-213.
[n] T. Romano et al., “Post-processing of additively manufactured pure copper RFQ elements”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7172, unpublished.
[n] R. Ricci, C. Sanelli, and A. Stecchi, “DAFNE Magnet Power Supply System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04G, pp. 2076-2078.
[n] D. Giove et al., “Dosimetry and first radiobiological assay of multi-Gy, multi-MeV TNSA proton beam with ultrahigh dose-rate”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2131-2134. doi:10.18429/JACoW-IPAC2023-TUPL165
[n] M. Boscolo and H. Burkhardt, “Lost Particles in the IR and Issues for Beam Induced Backgrounds in Higgs Factories”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SAT1B2, pp. 169-173.
[n] W. Wittmer et al., “Polarized Beams in the SuperB High Energy Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP054, pp. 2619-2621.
[n] S. Bartalucci, R. Boni, A. Gallo, H. Hsieh, G. Raffone, and B. Spataro, “Design Criteria and Measurements of Prototype of the DAPhiNE Accumulator Cavity”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1260-1263.
[n] L. H. Harwood, H. G. Blosser, J. A. Nolen, and R. F. Resmini, “Design of the NSCL Coupling Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2806-2809.
[n] D. Noelle, “Status of the Standard Diagnostic Systems of the European XFEL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF15, pp. 569-573.
[n] T. Cabanel et al., “SPIRAL 2 coupler preparation and RF conditioning”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP06, pp. XX-XX.
[n] R. M. Seraphim et al., “Installation and Commissioning of the Sirius Vacuum System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3455-3458. doi:10.18429/JACoW-IPAC2021-WEPAB333
[n] J. E. Dusatko, J. M. Cesaratto, J. D. Fox, J. J. Olsen, C. H. Rivetta, and W. H?Âfle, “The Hardware Implementation of the CERN SPS Ultrafast Feedback Processor Demonstrator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC28, pp. 124-127.
[n] A. V. Smirnov, D. Yu, and E. S. Masunov, “Long-Range Resonant Wakefields at High Group Velocity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH086, pp. 1868-1870.
[n] S. M. Liuzzo, M. E. Biagini, M. H. Donald, and P. Raimondi, “Low Emittance Tuning Studies for SuperB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB007, pp. 1530-1532.
[n] J. E. Spencer, “ESamp;H Issues for Design and Operation of Linear Colliders”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS144, pp. 0-3645.
[n] F. Sannibale et al., “Commissioning of BL 7.2, the New Diagnostic Beamline at the ALS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT140, pp. 2783-2785.
[n] K. Kawase and S. Matsuba, “Upgrade Plan of Synchrotron Radiation Source at Hiroshima Synchrotron Center, Hiroshima University”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2670-2671. doi:10.18429/JACoW-IPAC2017-WEPAB040
[n] A. V. Bubley et al., “Compass for Measuring the Magnetic Lines Straightness at the Cooling Section in Vacuum”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO12, pp. 121-123.
[n] A. M. Tron, T. V. Gorlov, and I. G. Merinov, “New Generation Streak Camera Design and Investigation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH072, pp. 1175-1177.
[n] A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800.
[n] S. Tazzari, “The ARES Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 317-320.
For LaTeX
Use Complete Form
For BibTeX
References
- A. A. Sahai et al., “Nanoplasmonic Accelerators Towards Tens of TeraVolts per Meter Gradients Using Nanomaterials”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 574-577.
- A. De Santis et al., “DANE Luminosity Monitor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 338-340.
- J. M. Byrd et al., “Broadband Self-amplified Spontaneous Coherent Synchrotron Radiation in a Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI019, pp. 659-661.
- F. Becker, “Beam Induced Fluorescence Monitors”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper WEOD01, pp. 575-579.
- A. V. Smirnov, “Far-Field Acceleration Scheme”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP17G, pp. 824-826.
- M. A. Green et al., “Lessons Learned for the MICE Coupling Solenoid from the MICE Spectrometer Solenoids”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB060, pp. 406-408.
- C. Omet, P. J. Spiller, and J. Stadlmann, “Simulation of Dynamic Vacuum Induced Beam Loss”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH078, pp. 211-213.
- T. Romano et al., “Post-processing of additively manufactured pure copper RFQ elements”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7172, this conference.
- R. Ricci, C. Sanelli, and A. Stecchi, “DAFNE Magnet Power Supply System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04G, pp. 2076-2078.
- D. Giove et al., “Dosimetry and first radiobiological assay of multi-Gy, multi-MeV TNSA proton beam with ultrahigh dose-rate”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL165, pp. 2131-2134.
- M. Boscolo and H. Burkhardt, “Lost Particles in the IR and Issues for Beam Induced Backgrounds in Higgs Factories”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SAT1B2, pp. 169-173.
- W. Wittmer et al., “Polarized Beams in the SuperB High Energy Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP054, pp. 2619-2621.
- S. Bartalucci, R. Boni, A. Gallo, H. Hsieh, G. Raffone, and B. Spataro, “Design Criteria and Measurements of Prototype of the DAPhiNE Accumulator Cavity”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1260-1263.
- L. H. Harwood, H. G. Blosser, J. A. Nolen, and R. F. Resmini, “Design of the NSCL Coupling Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2806-2809.
- D. Noelle, “Status of the Standard Diagnostic Systems of the European XFEL”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF15, pp. 569-573.
- T. Cabanel et al., “SPIRAL 2 coupler preparation and RF conditioning”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP06, pp. XX-XX.
- R. M. Seraphim et al., “Installation and Commissioning of the Sirius Vacuum System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3455-3458.
- J. E. Dusatko, J. M. Cesaratto, J. D. Fox, J. J. Olsen, C. H. Rivetta, and W. H?Âfle, “The Hardware Implementation of the CERN SPS Ultrafast Feedback Processor Demonstrator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC28, pp. 124-127.
- A. V. Smirnov, D. Yu, and E. S. Masunov, “Long-Range Resonant Wakefields at High Group Velocity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH086, pp. 1868-1870.
- S. M. Liuzzo, M. E. Biagini, M. H. Donald, and P. Raimondi, “Low Emittance Tuning Studies for SuperB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB007, pp. 1530-1532.
- J. E. Spencer, “ESamp;H Issues for Design and Operation of Linear Colliders”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS144, pp. 0-3645.
- F. Sannibale et al., “Commissioning of BL 7.2, the New Diagnostic Beamline at the ALS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT140, pp. 2783-2785.
- K. Kawase and S. Matsuba, “Upgrade Plan of Synchrotron Radiation Source at Hiroshima Synchrotron Center, Hiroshima University”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2670-2671.
- A. V. Bubley et al., “Compass for Measuring the Magnetic Lines Straightness at the Cooling Section in Vacuum”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO12, pp. 121-123.
- A. M. Tron, T. V. Gorlov, and I. G. Merinov, “New Generation Streak Camera Design and Investigation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH072, pp. 1175-1177.
- A. C. de Lira and P. Bellomo, “SPEAR3 INTERMEDIATE DC MAGNET POWER SUPPLIES”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF083, pp. 1798-1800.
- S. Tazzari, “The ARES Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 317-320.
Back to search