Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. D. Isbarn, S. Koetter, B. Riemann, M. Sommer, and T. Weis, “Cavity Characterization Studies With the Latest Revision of YACS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3503-3506. doi:10.18429/JACoW-IPAC2018-THPAK113
[n] Yu. Ya. Golub, “Ion Beam Undulator with Electron and Ion Beams with Different Radii”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1A09, pp. 1298-1299.
[n] J. Dabrowski, C. Nielson, W. Rambo, E. Zitvogel, and J. Kulesza, “NSLS Control System Interface to Parker 6K Motion Controller System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_040.
[n] H. Sugimoto, H. Koiso, K. Mori, A. Morita, Y. Ohnishi, and M. Tejima, “Optics Measurements at SuperKEKB Using Beam Based Calibration for BPM and BBA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1198-1202. doi:10.18429/JACoW-IPAC2019-TUZPLM2
[n] R. M Bryant, R. W. Carey, R. V. Claybourn, G. Pavel, and W. J. Schaefer, “National Ignition Facility Control Network Design and Analysis”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THDT004, pp. XX-XX.
[n] B. D. Isbarn, B. Riemann, M. Sommer, and T. Weis, “Parameter Studies and Geometry Optimization on Superconducting Multicell RF Cavity Resonators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2496-2498. doi:10.18429/JACoW-IPAC2014-WEPRI009
[n] J. DiMarco et al., “A Fast-sampling, Planar Array for Measuring the AC Field of Fermilab Pulsed Extraction Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC145, pp. 2350-2352.
[n] J. P. Woodruff, D. D. Casavant, B. D. Cline, and M. R. Gorvad, “Quality Control, Testing and Deployment Results in NIF ICCS”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT001, pp. XX-XX.
[n] J. Sheehan, W. Rambo, and O. Singh, “A Single Bunch Transfer System for the National Synchrotron Light Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2225-2228.
[n] J. Szumega, L. Bougueroua, B. Gkotse, P. Jouvelot, N. Minafra, and F. Ravotti, “Autoencoder Architectures For Beam Anomaly Detection And Statistical Distribution Characterization”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6022, unpublished.
[n] J. O. Hill, K. U. Kasimer, and J. B. Kowalkowski, “Integrating Commercial and Legacy Control Systems With EPICS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P044, pp. 2461-2463.
[n] T. Goto, “Development of organic solvent electropolishing method for Nb cavity”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 440-443. doi:10.18429/JACoW-SRF2025-TUP56
[n] Noriichi Kanaya, Seiji Asaoka, Hideki Maezawa, “Operation Logging System Using the Database for Synchrotron Radiation Beam Lines at the Photon Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P043, pp. 2458-2460.
[n] ?à. Andersson, O. V. Chubar, M. Rohrer, V. Schlott, and A. Streun, “Electron Beam Profile Measurements with Visible and X-ray Synchrotron Radiation at the Swiss Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH090, pp. 1223-1225.
For LaTeX
Use Complete Form
For BibTeX
References
- B. D. Isbarn, S. Koetter, B. Riemann, M. Sommer, and T. Weis, “Cavity Characterization Studies With the Latest Revision of YACS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3503-3506.
- Yu. Ya. Golub, “Ion Beam Undulator with Electron and Ion Beams with Different Radii”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1A09, pp. 1298-1299.
- J. Dabrowski, C. Nielson, W. Rambo, E. Zitvogel, and J. Kulesza, “NSLS Control System Interface to Parker 6K Motion Controller System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_040.
- H. Sugimoto, H. Koiso, K. Mori, A. Morita, Y. Ohnishi, and M. Tejima, “Optics Measurements at SuperKEKB Using Beam Based Calibration for BPM and BBA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1198-1202.
- R. M Bryant, R. W. Carey, R. V. Claybourn, G. Pavel, and W. J. Schaefer, “National Ignition Facility Control Network Design and Analysis”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THDT004, pp. XX-XX.
- B. D. Isbarn, B. Riemann, M. Sommer, and T. Weis, “Parameter Studies and Geometry Optimization on Superconducting Multicell RF Cavity Resonators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2496-2498.
- J. DiMarco et al., “A Fast-sampling, Planar Array for Measuring the AC Field of Fermilab Pulsed Extraction Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC145, pp. 2350-2352.
- J. P. Woodruff, D. D. Casavant, B. D. Cline, and M. R. Gorvad, “Quality Control, Testing and Deployment Results in NIF ICCS”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUDT001, pp. XX-XX.
- J. Sheehan, W. Rambo, and O. Singh, “A Single Bunch Transfer System for the National Synchrotron Light Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2225-2228.
- J. Szumega, L. Bougueroua, B. Gkotse, P. Jouvelot, N. Minafra, and F. Ravotti, “Autoencoder Architectures For Beam Anomaly Detection And Statistical Distribution Characterization”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6022, this conference.
- J. O. Hill, K. U. Kasimer, and J. B. Kowalkowski, “Integrating Commercial and Legacy Control Systems With EPICS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P044, pp. 2461-2463.
- T. Goto, “Development of organic solvent electropolishing method for Nb cavity”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP56, pp. 440-443.
- Noriichi Kanaya, Seiji Asaoka, Hideki Maezawa, “Operation Logging System Using the Database for Synchrotron Radiation Beam Lines at the Photon Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P043, pp. 2458-2460.
- ?à. Andersson, O. V. Chubar, M. Rohrer, V. Schlott, and A. Streun, “Electron Beam Profile Measurements with Visible and X-ray Synchrotron Radiation at the Swiss Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH090, pp. 1223-1225.
Back to search