Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Galonska et al., “Data Supply of Accelerator Devices - Data Management of Device Process Data at a Medical Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 477-480. doi:10.18429/JACoW-IPAC2018-MOPML033
[n] T. Tanabe et al., “Electron Cooling Device for TARN II”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2412-2415.
[n] I. Pogorelsky et al., “Laser Energy Conversion to Solitons and Monoenergetic Protons in Near-critical Hydrogen Plasma”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD072, pp. 4446-4448.
[n] S. P. Jamison et al., “Phase Space Manipulation with Laser-generated Terahertz Pulses”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD66, pp. 523-526.
[n] T. Murakami, K. Noda, K. Ohtomo, S. Shibuya, and S. Yamada, “Simulation of Short Bunched and Accelerated Beam by an Un-tuned Cavity”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A13, pp. 1540-1542.
[n] A. Navitski, E. Elsen, V. Myronenko, J. Schaffran, O. Turkot, and Y. Tamashevich, “Characterization of Surface Defects on EXFEL Series and ILC-Higrade Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB072, pp. 281-285.
[n] A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
[n] C. Steier et al., “Commissioning Results of the Fast Orbit Feedback at the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB037, pp. 3374-3376.
[n] D. Brandt, W. Herr, J. M. Jowett, M. Lamont, M. Meddahi, and A. Verdier, “A Candidate Low Emittance Lattice for LEP at its Highest Energies”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP09H, pp. 394-396.
[n] F. Brinker and O. Kaul, “Improvements of the Orbit Stability at DORIS III”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF020, pp. 2305-2307.
[n] H. Vera Ruiz and R. M. Lambrecht, “Trends in Cyclotrons for Radionuclide Production”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-05, pp. 28-30.
[n] K. Tian et al., “Fast Imaging of Time-dependent Distributions of Intense Electron Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS034, pp. 3573-3575.
[n] V. Sabaiduc, G. Gold, B. A. Versteeg, and J. Panama, “Resonator System for the BEST 70 MeV Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU2PB04, pp. 153-155.
[n] C. S. Derrez et al., “Initial Performance of the Beam Instrumentation for the ESS IS & LEBT”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2650-2653. doi:10.18429/JACoW-IPAC2019-WEPGW076
[n] T. K. Charles, M. J. Boland, R. T. Dowd, M. J. Spencer, and Y. E. Tan, “Time Resolved Tune Measurements and Stability Analysis of the Australian Synchrotron Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA003, pp. 2472-2474.
[n] Y. Wang et al., “Status of PNC High Power CW Electron Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E201, pp. 289-291.
[n] V. Litvinenko et al., “R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC057, pp. 193-195.
[n] M. Oriunno, T. W. Markiewicz, G. R. L. Collette, and D. Tshilumba, “A Simplified Model of the International Linear Collider Final Focus System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC120, pp. 1341-1344.
[n] D. Boussard and Y. Mizumachi, “Production of Beams with High Line-Density by Azimuthal Combination of Bunches in a Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3623-3626.
[n] V. V. Bezuglov et al., “High-Power Industrial Accelerator ILU-14 for E-Beam and X-Ray Processing”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOA05, pp. 409-412.
[n] S. A. Cherenshchykov, “Novel Modes of Vacuum Discharge in Magnetic Field as the Base for Effective Ion Generation”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-04, pp. 331-335.
[n] S. Pioli et al., “The Real-Time Waveform Mask Interlock System for the RF Gun Conditioning of the ELI-NP Gamma Beam System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1822-1823. doi:10.18429/JACoW-IPAC2017-TUPIK057
[n] P. Duval and S. W. Herb, “The TINE Control System Protocol: How to Achieve High Scalability and Performance”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA02, pp. 19-21.
[n] J. Emery, B. Dehning, E. Effinger, A. Nordt, and C. Zamantzas, “Self Testing Functionality of the LHC BLM System”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD44, pp. 152-154.
[n] Z. Reszela, G. Cuni, C. M. Falc??n Torres, D. Fernandez-Carreiras, C. Pascual-Izarra, and M. Rosanes Siscart, “Iterative Development of the Generic Continuous Scans in Sardana”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 524-528. doi:10.18429/JACoW-ICALEPCS2015-TUB3O02
[n] Y. E. Tan, M. J. Boland, R. T. Dowd, G. LeBlanc, and M. J. Spencer, “Storage Ring Turn-By-Turn BPMs At The Australian Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN004, pp. 3865-3867.
[n] M. R. Kraimer, J. B. Anderson, J. O. Hill, and W. E. Norum, “EPICS: A Retrospective on Porting iocCore to Multiple Operating Systems”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEBT002, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Galonska et al., “Data Supply of Accelerator Devices - Data Management of Device Process Data at a Medical Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 477-480.
- T. Tanabe et al., “Electron Cooling Device for TARN II”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2412-2415.
- I. Pogorelsky et al., “Laser Energy Conversion to Solitons and Monoenergetic Protons in Near-critical Hydrogen Plasma”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD072, pp. 4446-4448.
- S. P. Jamison et al., “Phase Space Manipulation with Laser-generated Terahertz Pulses”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD66, pp. 523-526.
- T. Murakami, K. Noda, K. Ohtomo, S. Shibuya, and S. Yamada, “Simulation of Short Bunched and Accelerated Beam by an Un-tuned Cavity”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A13, pp. 1540-1542.
- A. Navitski, E. Elsen, V. Myronenko, J. Schaffran, O. Turkot, and Y. Tamashevich, “Characterization of Surface Defects on EXFEL Series and ILC-Higrade Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB072, pp. 281-285.
- A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
- C. Steier et al., “Commissioning Results of the Fast Orbit Feedback at the ALS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB037, pp. 3374-3376.
- D. Brandt, W. Herr, J. M. Jowett, M. Lamont, M. Meddahi, and A. Verdier, “A Candidate Low Emittance Lattice for LEP at its Highest Energies”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP09H, pp. 394-396.
- F. Brinker and O. Kaul, “Improvements of the Orbit Stability at DORIS III”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF020, pp. 2305-2307.
- H. Vera Ruiz and R. M. Lambrecht, “Trends in Cyclotrons for Radionuclide Production”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-05, pp. 28-30.
- K. Tian et al., “Fast Imaging of Time-dependent Distributions of Intense Electron Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS034, pp. 3573-3575.
- V. Sabaiduc, G. Gold, B. A. Versteeg, and J. Panama, “Resonator System for the BEST 70 MeV Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU2PB04, pp. 153-155.
- C. S. Derrez et al., “Initial Performance of the Beam Instrumentation for the ESS IS & LEBT”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2650-2653.
- T. K. Charles, M. J. Boland, R. T. Dowd, M. J. Spencer, and Y. E. Tan, “Time Resolved Tune Measurements and Stability Analysis of the Australian Synchrotron Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA003, pp. 2472-2474.
- Y. Wang et al., “Status of PNC High Power CW Electron Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E201, pp. 289-291.
- V. Litvinenko et al., “R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC057, pp. 193-195.
- M. Oriunno, T. W. Markiewicz, G. R. L. Collette, and D. Tshilumba, “A Simplified Model of the International Linear Collider Final Focus System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC120, pp. 1341-1344.
- D. Boussard and Y. Mizumachi, “Production of Beams with High Line-Density by Azimuthal Combination of Bunches in a Synchrotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3623-3626.
- V. V. Bezuglov et al., “High-Power Industrial Accelerator ILU-14 for E-Beam and X-Ray Processing”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOA05, pp. 409-412.
- S. A. Cherenshchykov, “Novel Modes of Vacuum Discharge in Magnetic Field as the Base for Effective Ion Generation”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-04, pp. 331-335.
- S. Pioli et al., “The Real-Time Waveform Mask Interlock System for the RF Gun Conditioning of the ELI-NP Gamma Beam System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1822-1823.
- P. Duval and S. W. Herb, “The TINE Control System Protocol: How to Achieve High Scalability and Performance”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOAA02, pp. 19-21.
- J. Emery, B. Dehning, E. Effinger, A. Nordt, and C. Zamantzas, “Self Testing Functionality of the LHC BLM System”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD44, pp. 152-154.
- Z. Reszela, G. Cuni, C. M. Falc??n Torres, D. Fernandez-Carreiras, C. Pascual-Izarra, and M. Rosanes Siscart, “Iterative Development of the Generic Continuous Scans in Sardana”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 524-528.
- Y. E. Tan, M. J. Boland, R. T. Dowd, G. LeBlanc, and M. J. Spencer, “Storage Ring Turn-By-Turn BPMs At The Australian Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN004, pp. 3865-3867.
- M. R. Kraimer, J. B. Anderson, J. O. Hill, and W. E. Norum, “EPICS: A Retrospective on Porting iocCore to Multiple Operating Systems”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEBT002, pp. XX-XX.
Back to search