Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Raubenheimer et al., “Parameters for the SLAC Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC01, pp. 698-700.
[n] Y. Wei et al., “Beam Dynamics Studies into Grating-based Dielectric Laser-driven Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1970-1972. doi:10.18429/JACoW-IPAC2016-TUPOY027
[n] O. V. Singh, J. Flannigan, and R. Nawrocky, “Automatic Local Beam Steering Systems for NSLS X-Ray Storage Ring - Design and Implementation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1528-1531.
[n] F. Zimmermann et al., “Performance Issues, Downtime Recovery and Tuning in the Next Linear Collider (NLC)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W018, pp. 608-632.
[n] Y. Luo et al., “Weak-strong beam-beam simulation with crab cavity noises for the hadron storage ring of the Electron-Ion Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 250-253. doi:10.18429/JACoW-IPAC2024-MOPC78
[n] R. L. Martin, “Performance Characteristics of the ZGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 740-743.
[n] A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662.
[n] P. Gu, Z. Geng, G. Pei, S. H. Wang, M. Hou, and Y. Cui, “RF Phasing System for BEPCII Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11006, pp. XX-XX.
[n] G. W. Wheeler et al., “Roundtable on Performance of New Linacs”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper A-9, pp. 99-105.
[n] I. Borchardt et al., “Installation of the Superconducting Magnets in the HERA Tunnel”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 857-860.
[n] R. D. Hay, “The Design of Beam Inflector Magnets for Ultrhigh Vacuum Operation”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 746-750.
[n] W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
[n] Y. M. Li, K. Hanahoe, O. Mete Apsimon, T. H. Pacey, and G. X. Xia, “Proton-Driven Electron Acceleration in Hollow Plasma”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1601-1603. doi:10.18429/JACoW-IPAC2016-TUPMY025
[n] K. Capobianco-Hogan and J. Berg, “Lattice design of a pulsed synchrotron for a muon collider fitting within the Fermilab site boundary”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 448-451. doi:10.18429/JACoW-IPAC2024-MOPR01
[n] Y. Cho, E. F. Parker, A. Rauchas, and V. Stipp, “New Injection Scheme at the ZGS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1426-1428.
[n] G. H. Wei et al., “Beam Fast Extraction Tuning of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB016, pp. 3918-3920.
[n] J. Berg, “Calibration of the Main Linac Cryomodule Cavities for the CBETA Energy Recovery Linac”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL155, unpublished.
[n] D. Giove et al., “A High Voltage Extractor with Photocathodes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP02F, pp. 1133-1135.
[n] M. Li and T. J. Zhang, “Investigation of Emittance Growth in a Small PET Cyclotron CYCIAE-14”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA011, pp. 1745-1747.
[n] S. D. Ecklund, “The Status of SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1592-1596.
[n] S. Machida, Y. Mori, and T. Uesugi, “Experimental Study of Resonances in a High Intensity Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5A10, pp. 1333-1335.
[n] M. B?Âge, M. Aiba, A. L??deke, N. Milas, and A. Streun, “The Swiss Light Source a Test-bed" for Damping Ring Optimization"”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE091, pp. 3560-3562.
[n] R. L. Witkover et al., “Beam Instrumentation for the BNL Heavy Ion Transfer Line”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 567-570.
[n] E. Syresin et al., “Electron Cooling in NICA Acceleration Complex”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 109-113. doi:10.18429/JACoW-COOL2023-FRPAM1R2
[n] W. Wang and X. He, “The pre-alignment strategy of Hefei Advanced Light Facility storage ring magnet unit”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG39, unpublished.
[n] A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
[n] D. Beltran and J. A. Perlas, “Power Converters for the LLS Synchrotron Accelerator Magnet System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP25C, pp. 2070-2072.
[n] L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
[n] L. M. Hovhannisyan, S. T. Hakobyan, D. K. Kalantaryan, A. Streun, and V. M. Tsakanov, “The Acceptance and Photon Beam Formation in SLS FEMTO Beamline”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC112, pp. 2264-2266.
[n] W. Wang, K. Z. Ding, F. Jiang, S. Xu, and J. Zhou, “The Beam Dynamics Simulation of a Variable Energy Cyclotron for Isotope Production”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO014, pp. 334-337. doi:10.18429/JACoW-CYCLOTRONS2022-THPO014
[n] Y. C. Liao, X. Liu, R. Y. Luo, B. Qin, and W. Wang, “Design of a Large Momentum Acceptance Gantry Based on AG-CCT for Lightweight Proton Therapy Facility”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 111-113. doi:10.18429/JACoW-SAP2023-TUPB014
[n] K. Hanahoe, O. Mete, G. X. Xia, D. Angal-Kalinin, J. K. Jones, and J. D. A. Smith, “Particle-in-cell Simulations of a Plasma Lens at Daresbury Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 518-520. doi:10.18429/JACoW-IPAC2015-MOPJE084
[n] J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3679-3681. doi:10.18429/JACoW-IPAC2019-THPGW043
[n] G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2271-2274.
[n] J. Grillenberger, J. M. Humbel, A. C. Mezger, M. Seidel, and W. Tron, “Status and Further Development of the PSI High Intensity Proton Facility”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT004, pp. 37-39.
[n] W. Schnell, “High Frequency Linear Colliders”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 368-373.
[n] S. Rubio-Manrique and G. Cuni, “Dynamic Control Systems: Advantages and Challenges”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 46. doi:10.18429/JACoW-ICALEPCS2019-MOBPP05
[n] S. Hartman, V. N. Litvinenko, I. Pinayev, G. Swift, and Y. Wu, “Control System Design and Upgrade Considerations for the Duke Free Electron Laser Laboratory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH009, pp. 785-787.
[n] J. Berg, “A Fixed Field Alternating Gradient Lattice Design for Acceleration to energies as high as 5 TeV”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL160, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Raubenheimer et al., “Parameters for the SLAC Next Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC01, pp. 698-700.
- Y. Wei et al., “Beam Dynamics Studies into Grating-based Dielectric Laser-driven Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1970-1972.
- O. V. Singh, J. Flannigan, and R. Nawrocky, “Automatic Local Beam Steering Systems for NSLS X-Ray Storage Ring - Design and Implementation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1528-1531.
- F. Zimmermann et al., “Performance Issues, Downtime Recovery and Tuning in the Next Linear Collider (NLC)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W018, pp. 608-632.
- Y. Luo et al., “Weak-strong beam-beam simulation with crab cavity noises for the hadron storage ring of the Electron-Ion Collider”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC78, pp. 250-253.
- R. L. Martin, “Performance Characteristics of the ZGS”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 740-743.
- A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1659-1662.
- P. Gu, Z. Geng, G. Pei, S. H. Wang, M. Hou, and Y. Cui, “RF Phasing System for BEPCII Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11006, pp. XX-XX.
- G. W. Wheeler et al., “Roundtable on Performance of New Linacs”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper A-9, pp. 99-105.
- I. Borchardt et al., “Installation of the Superconducting Magnets in the HERA Tunnel”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 857-860.
- R. D. Hay, “The Design of Beam Inflector Magnets for Ultrhigh Vacuum Operation”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 746-750.
- W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
- Y. M. Li, K. Hanahoe, O. Mete Apsimon, T. H. Pacey, and G. X. Xia, “Proton-Driven Electron Acceleration in Hollow Plasma”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1601-1603.
- K. Capobianco-Hogan and J. Berg, “Lattice design of a pulsed synchrotron for a muon collider fitting within the Fermilab site boundary”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR01, pp. 448-451.
- Y. Cho, E. F. Parker, A. Rauchas, and V. Stipp, “New Injection Scheme at the ZGS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1426-1428.
- G. H. Wei et al., “Beam Fast Extraction Tuning of the J-PARC Main Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB016, pp. 3918-3920.
- J. Berg, “Calibration of the Main Linac Cryomodule Cavities for the CBETA Energy Recovery Linac”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL155, unpublished.
- D. Giove et al., “A High Voltage Extractor with Photocathodes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP02F, pp. 1133-1135.
- M. Li and T. J. Zhang, “Investigation of Emittance Growth in a Small PET Cyclotron CYCIAE-14”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA011, pp. 1745-1747.
- S. D. Ecklund, “The Status of SLC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1592-1596.
- S. Machida, Y. Mori, and T. Uesugi, “Experimental Study of Resonances in a High Intensity Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5A10, pp. 1333-1335.
- M. B?Âge, M. Aiba, A. L??deke, N. Milas, and A. Streun, “The Swiss Light Source a Test-bed" for Damping Ring Optimization"”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE091, pp. 3560-3562.
- R. L. Witkover et al., “Beam Instrumentation for the BNL Heavy Ion Transfer Line”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 567-570.
- E. Syresin et al., “Electron Cooling in NICA Acceleration Complex”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper FRPAM1R2, pp. 109-113.
- W. Wang and X. He, “The pre-alignment strategy of Hefei Advanced Light Facility storage ring magnet unit”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG39, unpublished.
- A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
- D. Beltran and J. A. Perlas, “Power Converters for the LLS Synchrotron Accelerator Magnet System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP25C, pp. 2070-2072.
- L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
- L. M. Hovhannisyan, S. T. Hakobyan, D. K. Kalantaryan, A. Streun, and V. M. Tsakanov, “The Acceptance and Photon Beam Formation in SLS FEMTO Beamline”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC112, pp. 2264-2266.
- W. Wang, K. Z. Ding, F. Jiang, S. Xu, and J. Zhou, “The Beam Dynamics Simulation of a Variable Energy Cyclotron for Isotope Production”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO014, pp. 334-337.
- Y. C. Liao, X. Liu, R. Y. Luo, B. Qin, and W. Wang, “Design of a Large Momentum Acceptance Gantry Based on AG-CCT for Lightweight Proton Therapy Facility”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 111-113.
- K. Hanahoe, O. Mete, G. X. Xia, D. Angal-Kalinin, J. K. Jones, and J. D. A. Smith, “Particle-in-cell Simulations of a Plasma Lens at Daresbury Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 518-520.
- J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3679-3681.
- G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2271-2274.
- J. Grillenberger, J. M. Humbel, A. C. Mezger, M. Seidel, and W. Tron, “Status and Further Development of the PSI High Intensity Proton Facility”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT004, pp. 37-39.
- W. Schnell, “High Frequency Linear Colliders”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 368-373.
- S. Rubio-Manrique and G. Cuni, “Dynamic Control Systems: Advantages and Challenges”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 46.
- S. Hartman, V. N. Litvinenko, I. Pinayev, G. Swift, and Y. Wu, “Control System Design and Upgrade Considerations for the Duke Free Electron Laser Laboratory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH009, pp. 785-787.
- J. Berg, “A Fixed Field Alternating Gradient Lattice Design for Acceleration to energies as high as 5 TeV”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL160, unpublished.
Back to search