Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. M. Baldin et al., “Nuclotron Status Report”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3247-3250.
[n] D. Wu, W. Bai, M. Li, H. B. Wang, and J. Wang, “A 54.167MHz Laser Wire System for Free Electron Laser in CAEP”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA13, pp. 493-495.
[n] J. S. Przybyla and E. Radcliffe, “RF Amplifier for Next Generation Light Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH154, pp. 1385-1387.
[n] D. W. Storm, I. Ben-Zvi, and J. M. Brennan, “Superconducting Resonators for the University of Washington Booster Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3607-3610.
[n] E. A. Perelstein, L. V. Bobyleva, A. V. Elzhov, and V. I. Kazacha, “Theoretical Study of Power Relativistic Amplifiers for Electron Beam Bunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W020, pp. 488-490.
[n] H. Lutz and D. Anicic, “Database Driven Control System Configuration for the PSI Proton Accelerator Facilities”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN022, pp. 289-291.
[n] K. Casarin et al., “The Personnel Safety System of the Elettra Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD039, pp. 538-540.
[n] J. P. Blaser and H. A. Willax, “Progress Report on the 500 - MeV Isochronous Cyclotron Meson Factory of ETH Zurich”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper D-001, pp. XX-XX.
[n] G. Reinhold, R. Gleyvod, and K. Trumpy, “High Power Cockroft-Walton Generator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 92-94.
[n] Y. Chen, M. Li, H. B. Wang, D. Wu, and X. Yang, “The Driving Laser for FEL-THz”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA12, pp. 349-351.
[n] S. N. Atutov et al., “Generation of a Frequency Comb for White-light Laser Cooling of Ions in a Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP039L, pp. 1188-1189.
[n] E. D. van Garderen, A. C. Starritt, Y. E. Tan, and K. Zingre, “Upgrade of the Booster Beam Position Monitors at the Australian Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD080, pp. 882-884.
[n] H. Kraft and L. Perrot, “Beam Dynamics and Diagnostics for the High Energy Beam Transport Line of MINERVA Project at SCKÔÇóCEN”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2304-2306. doi:10.18429/JACoW-IPAC2019-WEPMP003
[n] M. M. Holland and S. E. Metelits, “Final Design and Initial Performance of the Nevis Secondary Beam Channel”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-20, pp. 299-305.
[n] A. M. Baldin et al., “Present-Day Status of the Synchrophasotron as a Nuclear Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2043-2046.
[n] V. N. Buldakovsky et al., “Beam Injection into the Nuclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P011, pp. 184-186.
[n] W. Bai, Y. Chen, M. Li, L. J. Shan, X. M. Shen, and H. B. Wang, “DEVELOPMENT OF AN ITC-RF GUN FOR COMPACT THz FEL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA23, pp. 385-386.
[n] M. Schwarz et al., “Advanced Beam Dynamics Design for the Superconducting Heavy Ion Accelerator HELIAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 928-931. doi:10.18429/JACoW-IPAC2019-MOPTS034
[n] S. Lamprecht et al., “Conditioning of the Frontline Cavities of the MYRRHA Injector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 895-897. doi:10.18429/JACoW-IPAC2019-MOPTS023
[n] N. N. Agapov et al., “Rapid Cycling Superconducting Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A17, pp. 560-562.
[n] N. Bazin et al., “Design of the PIP-II 650 MHz Low Beta Cryomodule”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 841. doi:10.18429/JACoW-SRF2021-THPTEV006
[n] T. Tajima, M. J. Borden, A. Canabal, T. A. Harden, and P. C. Pittman, “Pre-conceptual Design of Automated Systems for SRF Cavity Assembly and Optical Inspection”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS032, pp. 2409-2411.
[n] Y. E. Tan, D. J. Peake, and D. O. Tavares, “Fast Orbit Feedback with Linux PREEMPT_RT”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 630-633. doi:10.18429/JACoW-IBIC2016-WEPG08
[n] Y. Kawase and M. Inoue, “Neutron Factory Project at KURRI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D012, pp. 104-106.
[n] W. F. Eaton, W. S. Gilbert, R. A. Kilpatrick, R. B. Meuser, F. L. Toby, and F. Voelker, “Superconducting Pulsed Synchrotron Dipole and DC Beam Transport Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 674-677.
[n] J.-C. Chapuis, J. P. A. Arnoul, A. Hurst, and M. G. Manson, “The Laser M?®gaJoule Facility: Personnel Security and Safety Interlocks”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU009, pp. 1070-1072.
[n] T. Tajima et al., “Full Temperature Mapping System for Standard 1.3 GHz 9-Cell Elliptical SRF Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP036, pp. 2073-2075.
[n] P. M??ller et al., “Surface Preparation and Optimization of SC CH Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 71-73. doi:10.18429/JACoW-SRF2019-MOP019
[n] J. Ding, D. L. Hall, and M. Liepe, “Simulations of RF Field-induced Thermal Feedback in Niobium and Nb3Sn Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 920-924. doi:10.18429/JACoW-SRF2017-THPB079
[n] P. Sichta, J. Dong, G. Oliaro, and P. Roney, “Overview of the NSTX Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUBT004, pp. XX-XX.
[n] H. A. Willax, “Proposal for a 500 MeV Isochronous Cyclotron with Ring Magnet”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H04, pp. XX-XX.
[n] W. Coosemans et al., “Determination of the Accuracy of Wire Position Sensors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B08, pp. 406-408.
[n] F. Banfi et al., “Monte Carlo Transverse Emittance Study on Cs2Te”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP046, pp. XX-XX.
[n] M. M. Holland, J. M. Brennan, R. C. Cohen, I. S. Hammerman, and E. J. Martin, “Design of Secondary Beam Channels for the Nevis Synchrocyclotroyn Conversion Program”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 787-792.
[n] T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
[n] G. Reinhold, “Highly Stabilized Electron Accelerators for Electron Microscopy at Extra-High Voltages”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 134-139.
[n] D. W. Storm et al., “Nevis Synchrocyclotron Beam Status Report”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1408-1411.
[n] C. Saunders, D. A. Dohan, and N. D. Arnold, “The IRMIS Object Model and Services API”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_007.
For LaTeX
Use Complete Form
For BibTeX
References
- A. M. Baldin et al., “Nuclotron Status Report”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3247-3250.
- D. Wu, W. Bai, M. Li, H. B. Wang, and J. Wang, “A 54.167MHz Laser Wire System for Free Electron Laser in CAEP”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA13, pp. 493-495.
- J. S. Przybyla and E. Radcliffe, “RF Amplifier for Next Generation Light Sources”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH154, pp. 1385-1387.
- D. W. Storm, I. Ben-Zvi, and J. M. Brennan, “Superconducting Resonators for the University of Washington Booster Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3607-3610.
- E. A. Perelstein, L. V. Bobyleva, A. V. Elzhov, and V. I. Kazacha, “Theoretical Study of Power Relativistic Amplifiers for Electron Beam Bunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W020, pp. 488-490.
- H. Lutz and D. Anicic, “Database Driven Control System Configuration for the PSI Proton Accelerator Facilities”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN022, pp. 289-291.
- K. Casarin et al., “The Personnel Safety System of the Elettra Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD039, pp. 538-540.
- J. P. Blaser and H. A. Willax, “Progress Report on the 500 - MeV Isochronous Cyclotron Meson Factory of ETH Zurich”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper D-001, pp. XX-XX.
- G. Reinhold, R. Gleyvod, and K. Trumpy, “High Power Cockroft-Walton Generator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 92-94.
- Y. Chen, M. Li, H. B. Wang, D. Wu, and X. Yang, “The Driving Laser for FEL-THz”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA12, pp. 349-351.
- S. N. Atutov et al., “Generation of a Frequency Comb for White-light Laser Cooling of Ions in a Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP039L, pp. 1188-1189.
- E. D. van Garderen, A. C. Starritt, Y. E. Tan, and K. Zingre, “Upgrade of the Booster Beam Position Monitors at the Australian Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD080, pp. 882-884.
- H. Kraft and L. Perrot, “Beam Dynamics and Diagnostics for the High Energy Beam Transport Line of MINERVA Project at SCKÔÇóCEN”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2304-2306.
- M. M. Holland and S. E. Metelits, “Final Design and Initial Performance of the Nevis Secondary Beam Channel”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-20, pp. 299-305.
- A. M. Baldin et al., “Present-Day Status of the Synchrophasotron as a Nuclear Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2043-2046.
- V. N. Buldakovsky et al., “Beam Injection into the Nuclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P011, pp. 184-186.
- W. Bai, Y. Chen, M. Li, L. J. Shan, X. M. Shen, and H. B. Wang, “DEVELOPMENT OF AN ITC-RF GUN FOR COMPACT THz FEL”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA23, pp. 385-386.
- M. Schwarz et al., “Advanced Beam Dynamics Design for the Superconducting Heavy Ion Accelerator HELIAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 928-931.
- S. Lamprecht et al., “Conditioning of the Frontline Cavities of the MYRRHA Injector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 895-897.
- N. N. Agapov et al., “Rapid Cycling Superconducting Booster Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A17, pp. 560-562.
- N. Bazin et al., “Design of the PIP-II 650 MHz Low Beta Cryomodule”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 841.
- T. Tajima, M. J. Borden, A. Canabal, T. A. Harden, and P. C. Pittman, “Pre-conceptual Design of Automated Systems for SRF Cavity Assembly and Optical Inspection”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS032, pp. 2409-2411.
- Y. E. Tan, D. J. Peake, and D. O. Tavares, “Fast Orbit Feedback with Linux PREEMPT_RT”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 630-633.
- Y. Kawase and M. Inoue, “Neutron Factory Project at KURRI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D012, pp. 104-106.
- W. F. Eaton, W. S. Gilbert, R. A. Kilpatrick, R. B. Meuser, F. L. Toby, and F. Voelker, “Superconducting Pulsed Synchrotron Dipole and DC Beam Transport Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 674-677.
- J.-C. Chapuis, J. P. A. Arnoul, A. Hurst, and M. G. Manson, “The Laser M?®gaJoule Facility: Personnel Security and Safety Interlocks”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU009, pp. 1070-1072.
- T. Tajima et al., “Full Temperature Mapping System for Standard 1.3 GHz 9-Cell Elliptical SRF Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP036, pp. 2073-2075.
- P. M??ller et al., “Surface Preparation and Optimization of SC CH Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 71-73.
- J. Ding, D. L. Hall, and M. Liepe, “Simulations of RF Field-induced Thermal Feedback in Niobium and Nb3Sn Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 920-924.
- P. Sichta, J. Dong, G. Oliaro, and P. Roney, “Overview of the NSTX Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUBT004, pp. XX-XX.
- H. A. Willax, “Proposal for a 500 MeV Isochronous Cyclotron with Ring Magnet”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H04, pp. XX-XX.
- W. Coosemans et al., “Determination of the Accuracy of Wire Position Sensors”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B08, pp. 406-408.
- F. Banfi et al., “Monte Carlo Transverse Emittance Study on Cs2Te”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP046, pp. XX-XX.
- M. M. Holland, J. M. Brennan, R. C. Cohen, I. S. Hammerman, and E. J. Martin, “Design of Secondary Beam Channels for the Nevis Synchrocyclotroyn Conversion Program”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 787-792.
- T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
- G. Reinhold, “Highly Stabilized Electron Accelerators for Electron Microscopy at Extra-High Voltages”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 134-139.
- D. W. Storm et al., “Nevis Synchrocyclotron Beam Status Report”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1408-1411.
- C. Saunders, D. A. Dohan, and N. D. Arnold, “The IRMIS Object Model and Services API”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_007.
Back to search