JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. D?Âbert et al., “Beam Diagnostics using Transition Radiation”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F33, pp. 719-722. 
[n]	S. A. Pande, R. Bartolini, R. T. Fielder, and M. Jensen, “Impedance Estimation of Diamond Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP058, pp. 1673-1675. 
[n]	J. Marroncle, P. Abbon, E. Delagnes, F. Jeanneau, J.-Ph. Mols, and J. Pancin, “Beam Transverse Profile Monitor Prototype for IFMIF-EVEDA Accelerator”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF064, pp. 268-269. 
[n]	R. C. McCrady and H. A. Watkins, “Reference Signal Distribution for Beam Position and Phase Monitors at LANSCE”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 235-237. doi:10.18429/JACoW-IBIC2015-MOPB074
[n]	Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX. 
[n]	S. Gustafsson et al., “Influence of Electroplating Parameters on Quality of Lead Coatings on Copper”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F11, pp. 589-593. 
[n]	Y. Arimoto et al., “Construction of Six-sector FFAG Ring for Muon Phase Rotation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP071, pp. 3524-3526. 
[n]	P. V. Logatchev et al., “Measurement of Time Response of Laser-Triggered GaAs Photocathode”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1480-1483. 
[n]	C. Prados and T. Fleck, “FEC in Deterministic Control Systems over Gigabit Ethernet”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL011, pp. 147-149. 
[n]	M. Carl?á, A. Alekou, H. Bartosik, and L. R. Carver, “Beam-Based Measurement of the Skew-Sextupolar Component of the Radio Frequency Field of a HL-LHC-Type Crab-Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1066-1069. doi:10.18429/JACoW-IPAC2019-MOPTS090
[n]	J. P. Aknin et al., “Status Report in Rejuvenating SATURNE and Future Aspects”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3138-3143. 
[n]	S. Adam, M. Humbel, and W. Joho, “Beam Dynamical Aspects of the SIN Injector II”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B01, pp. 20-23. 
[n]	R. Erickson, T. Fieguth, and J. J. Murray, “Superconducting Quadrupoles for the SLC Final Focus”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 142-145. 
[n]	T. Karasawa et al., “Heavy Ion Acceleration in the IPCR 160cm Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E07, pp. XX-XX. 
[n]	G. A. Loew, “The SLAC Linear Collider and a Few Ideas on Future Linear Colliders”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0002, pp. 282-287. 
[n]	G. Turemen, B. Yasatekin, A. Alacakir, G. Unel, and H. Yildiz, “Status of the SPP RFQ Project”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP067, pp. 1004-1006. 
[n]	S. Smith, “The Status of the Daresbury Energy Recovery Linac Prototype (ERLP)”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 20, pp. 6-10. 
[n]	K. Cummings, J. M. De Baca, J. Harrison, M. Rodrigiuez, P. A. Torrez, and D. K. Warner, “High Power Testing of the 402.5 MHz and 805 MHz RF Windows for the Spallation Neutron Source Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB022, pp. 1237-1239. 
[n]	K. Halbach, “Effect of Drift Tube Tolerances on the Electric Field Distribution along the Length of an Alvarez Cavity”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-7, pp. 1141-1149. 
[n]	A. Rost, J. Adamczewski-Musch, T. Galatyuk, S. Linev, J. Pietraszko, and M. Traxler, “Beam Quality Monitoring System in the HADES Experiment at GSI Using CVD Diamond Material”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 300-302. doi:10.18429/JACoW-IBIC2018-TUPC03

For LaTeX

Use Complete Form

For BibTeX

References

Back to search