Favourites
For Word
[n] J. Chen, Y. B. Leng, L. Y. Yu, and N. Zhang, “The Removal of Interference Noise of ICT using the PCA Method”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 22-25. doi:10.18429/JACoW-IBIC2018-MOOC03
[n] G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974.
[n] M. Vidmar, “Noise in Radio/Optical Communications”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 1-5. doi:10.18429/JACoW-IBIC2018-MOOA02
[n] C. Kwankasem and S. Chunjarean, “Storage Ring Beam Dynamics Modeling with Limited Instrumentation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP029, pp. 4369-4371.
[n] M. Cargnelutti and K. B. Scheidt, “Commissioning Results of the New BPM Electronics of the ESRF Booster Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 24-27. doi:10.18429/JACoW-IPAC2015-MOAB3
[n] J. Pfingstner, E. Adli, C. A. Lindstrom, E. Marin, and D. Schulte, “Considerations for a Drive Beam Scheme for a Plasma Wakefield Linear Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2565-2568. doi:10.18429/JACoW-IPAC2016-WEPMY010
[n] G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
[n] F. Bulos et al., “Design of a High Yield Position Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1832-1835.
[n] J. B. Strait et al., “Towards a New LHC Interaction Region Design for a Luminosity Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPA006, pp. 42-44.
[n] N. Pichoff et al., “The SARAF-LINAC Project Status”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 38-40. doi:10.18429/JACoW-LINAC2016-MOOP01
[n] S. Chunjarean and S. Shin, “Insertion Devices and Beam Dynamics in the PLS-II Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC072, pp. 2187-2189.
[n] D. Chirpaz-Cerbat et al., “Status of the ESS RFQ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 974-976. doi:10.18429/JACoW-IPAC2016-MOPOY054
[n] C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n] K. Noda et al., “New Treatment Research Facility Project at HIMAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOCRA01, pp. 1324-1326.
[n] J. Bae et al., “Multi-photon Photoemission and Ultrafast Electron Heating in Cu Photocathodes at Threshold”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1593-1596. doi:10.18429/JACoW-IPAC2018-TUPML026
[n] J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n] E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 196-199. doi:10.18429/JACoW-IPAC2018-MOPMF043
[n] S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
[n] N. Pichoff et al., “Discussion on SARAF-LINAC Cryomodules”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 80-82. doi:10.18429/JACoW-HB2018-TUA2WC01
[n] I. Haber et al., “Computer Simulation of the UMER Electron Gun”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH045, pp. 2952-2954.
[n] Y. Iwata et al., “Superconducting Gantry and Other Developments at HIMAC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper FRXB1, pp. 1463-1467.
[n] T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110.
[n] J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n] S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452.
[n] A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280.
[n] E. Colby, C. D. Barnes, and C. M. Sears, “An Electron Source for a Laser Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB026, pp. 2101-2103.
[n] N. Fuster-Martinez et al., “Realistic Beam Halo Model study in the Extraction Line of ATF2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2038-2041. doi:10.18429/JACoW-IPAC2015-TUPTY019
[n] Y. Hashimoto et al., “Development of a Beam Profile Monitor using a Nitrogen-Molecular Jet for the J-PARC MR”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF17, pp. 848-851.
[n] B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3321-3323. doi:10.18429/JACoW-IPAC2015-WEPTY026
[n] D. J. Butler and J. H. Kelly, “Design of the Diamond Light Source DMM for the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 420-424. doi:10.18429/JACoW-MEDSI2016-FRBA03
[n] A. Shkvarunets, D. W. Feldman, J. Harris, J. Neumann, P. G. O'Shea, and R. Fiorito, “The Application of OTR-ODR Interferometry to the Measurement of the Divergence of Low Energy Electron Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH028, pp. 1285-1287.
[n] D. T. Palmer et al., “ORION: An Advanced Accelerator Facility at SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH068, pp. 2251-2253.
[n] A. D. McInturff et al., “The Fermilab Collider DOslash Low /beta System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1264-1267.
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
[n] J. D. O et al., “BART: Development of a Sample Exchange System for MX Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1919-1922. doi:10.18429/JACoW-ICALEPCS2017-THPHA200
[n] Y. Hashimoto et al., “Development of a Nondestructive Beam Profile Monitor using a Sheeted Nitrogen-molecular Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE014, pp. 987-989.
[n] A. Gotz et al., “TANGO Heads for Industry”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1195-1200. doi:10.18429/JACoW-ICALEPCS2017-THCPL05
[n] T. Chanwattana et al., “Update on Injector for the New Synchrotron Light Source in Thailand”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 435-437. doi:10.18429/JACoW-IPAC2021-MOPAB120
[n] Y. Hashimoto et al., “Multi-Ribbon Profile Monitor Using Carbon Graphite Foil for J-PARC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A01, pp. 429-433.
[n] R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 412-414. doi:10.18429/JACoW-IPAC2018-MOPML010
[n] N. V. Mokhov and J. B. Strait, “Towards the Optimal LHC Interaction Region: Beam-Induced Energy Deposition”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P019, pp. 124-126.
[n] N. V. Mokhov, J. S. Kerby, I. L. Rakhno, and J. B. Strait, “Mitigation of Effects of Beam-Induced Energy Deposition in the LHC High-Luminosity Interaction Regions”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB064, pp. 1745-1747.
[n] F.-J. Decker et al., “Performance Improvements of the SLAC Linac for the FACET Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO068, pp. 2021-2023.
[n] Y. Arakida et al., “H- Painting Injection for the JHF 3-GeV Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23C, pp. 2103-2105.
[n] R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
[n] K. Noda et al., “Recent Progress on HIMAC for Carbon Therapy”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GAI02, pp. 3137-3141.
[n] N. Simos, H. G. Kirk, K. T. McDonald, N. V. Mokhov, J. G. O Conor, and L. P. Trung, “Experimental Studies of Targets and Collimators for High Intensity Beams”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBZ04, pp. 143-149.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Chen, Y. B. Leng, L. Y. Yu, and N. Zhang, “The Removal of Interference Noise of ICT using the PCA Method”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 22-25.
- G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974.
- M. Vidmar, “Noise in Radio/Optical Communications”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 1-5.
- C. Kwankasem and S. Chunjarean, “Storage Ring Beam Dynamics Modeling with Limited Instrumentation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP029, pp. 4369-4371.
- M. Cargnelutti and K. B. Scheidt, “Commissioning Results of the New BPM Electronics of the ESRF Booster Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 24-27.
- J. Pfingstner, E. Adli, C. A. Lindstrom, E. Marin, and D. Schulte, “Considerations for a Drive Beam Scheme for a Plasma Wakefield Linear Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2565-2568.
- G. Sterbini, S. Doebert, R. L. Lillestol, E. Marin, D. Schulte, and E. Adli, “Beam-based Alignment in CTF3 Test Beam Line”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR034, pp. 1894-1896.
- F. Bulos et al., “Design of a High Yield Position Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1832-1835.
- J. B. Strait et al., “Towards a New LHC Interaction Region Design for a Luminosity Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MOPA006, pp. 42-44.
- N. Pichoff et al., “The SARAF-LINAC Project Status”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 38-40.
- S. Chunjarean and S. Shin, “Insertion Devices and Beam Dynamics in the PLS-II Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC072, pp. 2187-2189.
- D. Chirpaz-Cerbat et al., “Status of the ESS RFQ”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 974-976.
- C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2561-2564.
- K. Noda et al., “New Treatment Research Facility Project at HIMAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOCRA01, pp. 1324-1326.
- J. Bae et al., “Multi-photon Photoemission and Ultrafast Electron Heating in Cu Photocathodes at Threshold”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1593-1596.
- J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 304-308.
- E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 196-199.
- S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
- N. Pichoff et al., “Discussion on SARAF-LINAC Cryomodules”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 80-82.
- I. Haber et al., “Computer Simulation of the UMER Electron Gun”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH045, pp. 2952-2954.
- Y. Iwata et al., “Superconducting Gantry and Other Developments at HIMAC”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper FRXB1, pp. 1463-1467.
- T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110.
- J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 152-155.
- S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452.
- A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280.
- E. Colby, C. D. Barnes, and C. M. Sears, “An Electron Source for a Laser Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB026, pp. 2101-2103.
- N. Fuster-Martinez et al., “Realistic Beam Halo Model study in the Extraction Line of ATF2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2038-2041.
- Y. Hashimoto et al., “Development of a Beam Profile Monitor using a Nitrogen-Molecular Jet for the J-PARC MR”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF17, pp. 848-851.
- B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3321-3323.
- D. J. Butler and J. H. Kelly, “Design of the Diamond Light Source DMM for the VMXi Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 420-424.
- A. Shkvarunets, D. W. Feldman, J. Harris, J. Neumann, P. G. O'Shea, and R. Fiorito, “The Application of OTR-ODR Interferometry to the Measurement of the Divergence of Low Energy Electron Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH028, pp. 1285-1287.
- D. T. Palmer et al., “ORION: An Advanced Accelerator Facility at SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH068, pp. 2251-2253.
- A. D. McInturff et al., “The Fermilab Collider DOslash Low /beta System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1264-1267.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
- J. D. O et al., “BART: Development of a Sample Exchange System for MX Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1919-1922.
- Y. Hashimoto et al., “Development of a Nondestructive Beam Profile Monitor using a Sheeted Nitrogen-molecular Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE014, pp. 987-989.
- A. Gotz et al., “TANGO Heads for Industry”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1195-1200.
- T. Chanwattana et al., “Update on Injector for the New Synchrotron Light Source in Thailand”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 435-437.
- Y. Hashimoto et al., “Multi-Ribbon Profile Monitor Using Carbon Graphite Foil for J-PARC”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A01, pp. 429-433.
- R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 412-414.
- N. V. Mokhov and J. B. Strait, “Towards the Optimal LHC Interaction Region: Beam-Induced Energy Deposition”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P019, pp. 124-126.
- N. V. Mokhov, J. S. Kerby, I. L. Rakhno, and J. B. Strait, “Mitigation of Effects of Beam-Induced Energy Deposition in the LHC High-Luminosity Interaction Regions”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB064, pp. 1745-1747.
- F.-J. Decker et al., “Performance Improvements of the SLAC Linac for the FACET Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO068, pp. 2021-2023.
- Y. Arakida et al., “H- Painting Injection for the JHF 3-GeV Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23C, pp. 2103-2105.
- R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
- K. Noda et al., “Recent Progress on HIMAC for Carbon Therapy”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GAI02, pp. 3137-3141.
- N. Simos, H. G. Kirk, K. T. McDonald, N. V. Mokhov, J. G. O Conor, and L. P. Trung, “Experimental Studies of Targets and Collimators for High Intensity Beams”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBZ04, pp. 143-149.
Back to search