Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. L. Fu et al., “400 MHz Frequency/phase Detector and Counter”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3481-3483. doi:10.18429/JACoW-IPAC2018-THPAK106
[n] Y. Lei et al., “The Design and Testing of an Automatic RF Conditioning System for the Compact Medical Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT026, pp. 209-211.
[n] Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611.
[n] H. Nishimura et al., “ALS Control System Upgrade in C#”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP015, pp. 4803-4804.
[n] T. Kamps et al., “Operational Experience with the Nb/Pb SRF Photoelectron Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD051, pp. 1518-1520.
[n] D. L. Cook, “Progress in Light Ion Fusion”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 537-542.
[n] M. E. Thuot, “The Success and the Future of EPICS”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH203, pp. 611-615.
[n] M. K?Ârfer Deutsches Elektronen-Synchrotron, H. Henschel, J. Kuhnhenn Fraunhofer-INT, and F. Wulf Hahn-Meitner Institut, “Optical Fibre Dosimeter for SASE FEL Undulators”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT31, pp. XX-XX.
[n] L. Ristori and W. F. Toter, “Development at ANL of a Copper-brazed Joint for the Coupling of the Niobium Cavity End Wall to the Stainless Steel Helium Vessel in the Fermilab SSR1 Resonator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC058, pp. 2345-2347.
[n] N. Bidault, “Transverse Emittance Measurements of the Beams Produced by the ISOLDE Target Ion Sources”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 144-147. doi:10.18429/JACoW-IPAC2022-MOPOST036
[n] C. D. Nantista, I. E. Campisi, V. A. Dolgashev, R. Siemann, S. G. Tantawi, and J. Weisend, “Test Bed for Superconducting Materials”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT089, pp. 4227-4229.
[n] V. Previtali, G. Stancari, A. Valishev, and S. Redaelli, “Numerical Simulations of a Hollow Electron Lens as a Scraping Device for the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO044, pp. 993-995.
For LaTeX
Use Complete Form
For BibTeX
References
- X. L. Fu et al., “400 MHz Frequency/phase Detector and Counter”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3481-3483.
- Y. Lei et al., “The Design and Testing of an Automatic RF Conditioning System for the Compact Medical Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT026, pp. 209-211.
- Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611.
- H. Nishimura et al., “ALS Control System Upgrade in C#”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP015, pp. 4803-4804.
- T. Kamps et al., “Operational Experience with the Nb/Pb SRF Photoelectron Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD051, pp. 1518-1520.
- D. L. Cook, “Progress in Light Ion Fusion”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 537-542.
- M. E. Thuot, “The Success and the Future of EPICS”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TH203, pp. 611-615.
- M. K?Ârfer Deutsches Elektronen-Synchrotron, H. Henschel, J. Kuhnhenn Fraunhofer-INT, and F. Wulf Hahn-Meitner Institut, “Optical Fibre Dosimeter for SASE FEL Undulators”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT31, pp. XX-XX.
- L. Ristori and W. F. Toter, “Development at ANL of a Copper-brazed Joint for the Coupling of the Niobium Cavity End Wall to the Stainless Steel Helium Vessel in the Fermilab SSR1 Resonator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC058, pp. 2345-2347.
- N. Bidault, “Transverse Emittance Measurements of the Beams Produced by the ISOLDE Target Ion Sources”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 144-147.
- C. D. Nantista, I. E. Campisi, V. A. Dolgashev, R. Siemann, S. G. Tantawi, and J. Weisend, “Test Bed for Superconducting Materials”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT089, pp. 4227-4229.
- V. Previtali, G. Stancari, A. Valishev, and S. Redaelli, “Numerical Simulations of a Hollow Electron Lens as a Scraping Device for the LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO044, pp. 993-995.
Back to search