Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Di Carlo et al., “CI-CD Practices with the TANGO-controls Framework in the Context of the Square Kilometre Array (SKA) Telescope Project”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 114. doi:10.18429/JACoW-ICALEPCS2019-MOCPR05
[n] M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2616-2619. doi:10.18429/JACoW-IPAC2025-THPB052
[n] M. Ivanyan, L. V. Aslyan, K. Fl?Âttmann, and F. Lemery, “Transverse Impedance of Lossy Circular Metal-Dielectric Waveguides”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2093-2096. doi:10.18429/JACoW-IPAC2021-TUPAB269
[n] A. Zaltsman et al., “Commissioning of the EBIS-Based Heavy Ion Preinjector at Brookhaven”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper FR103, pp. 1033-1037.
[n] C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA059, unpublished.
[n] M. Syphers et al., “Helical Dipole Magnets for Polarized Protons in RHIC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P009, pp. 3359-3361.
[n] S. Williams, R. Dowd, R. Rassool, S. Sheehy, G. Taylor, and M. Volpi, “Evaluation of a compact electron preinjector using a low beta acceptance X-band accelerating structure”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2089-2092. doi:10.18429/JACoW-IPAC2023-TUPL151
[n] R. Barillère, J.-M. Le Goff, H. Milcent, and R. Stampfli, “Ideas on a Generic Control Systems Based on the Experience on the 4 LEP Experiments Control System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 246-253. doi:10.18429/JACoW-ICALEPCS1991-S06SA02
[n] A. I. Agueev et al., “Magnet Test Facility Control System for Superconducting Magnets of UNK”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 171-173. doi:10.18429/JACoW-ICALEPCS1991-S04SRS04
[n] D. Raparia et al., “A New Medium Energy Beam Transport Line for the Proton Injector of AGS-RHIC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP027, pp. 458-460.
[n] M. G. Mazarakis et al., “Transport Experiments with Neutralized and Space Charge Dominated Denutralized 2 mA 80 keV Xe! Beams”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3042-3045.
[n] I. S. Lehrman, J. Krishnaswamy, R. A. Hartley, and R. H. Austin, “The Northrop Grumman Compact Infrared FEL (CIRFEL)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA31, pp. 260-262.
[n] A. Zaltsman et al., “EBIS Preinjector Construction Status”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP120, pp. 685-687.
[n] J. G. Alessi et al., “Low and Medium Energy Beam Trasport Upgrade at BNL 200 MeV Linac”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP026, pp. 455-457.
[n] V. P. Yakovlev et al., “Nonlinear Effects in Ferrite Tuned Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 877-880.
[n] M. A. Allen, L. G. Karvonen, R. A. McConnell, and H. Schwarz, “Operation of PEP Longitudinal Feedback System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2317-2320.
[n] A. Ratti et al., “Test Results of the AGS Booster Low Frequency RF System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1166-1169.
[n] K. B. Mallory, “Some Effects of (Now Having) Computer Control for the Stanford Linear Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 541-544.
[n] M. Popovic et al., “Novel injection locked coaxial magnetrons”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1489-1491. doi:10.18429/JACoW-IPAC2024-TUPR29
[n] A. Asoyan et al., “Beam-based alignment of magnetic system in AREAL linear accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2978-2981. doi:10.18429/JACoW-IPAC2024-THPC08
[n] J. Hetzel et al., “Algorithmic access to beam control and beam diagnostics at COSY Jülich”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2638-2641. doi:10.18429/JACoW-IPAC2024-WEPR60
[n] J. Choi, T. Lee, K. Nam, and M. Yoon, “Magnet Lattice of the Pohang Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2673-2676.
[n] T. J. Shea et al., “SNS Accelerator Diagnostics: Progress and Challenges”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB001, pp. 512-516.
[n] L. Walling, F. Brandeberry, Y. Goren, and N. Spayd, “Eddy Current Analysis for the SSC Low Energy Booster Cavity”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 880-883.
[n] J. Sheehan, I. S. Lehrman, M. F. Reusch, R. L. Heuer, J. Krishnaswamy, and R. Hartley, “Design and Construction of a Compact Infra Red Free Electron Laser CIRFEL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1527-1530.
[n] N. Us Saqib et al., “ALS storage ring RF control system upgrade plan and status”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 590-594. doi:10.18429/JACoW-ICALEPCS2025-TUPD031
[n] M. A. Allen and R. A. McConnell, “Operation of the Spear RF System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 373-378.
[n] F. Lemery and P. Piot, “Temporal Electron-bunch Shaping from a Photoinjector for Advanced Accelerator Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1454-1456. doi:10.18429/JACoW-IPAC2014-TUPME043
[n] B. Rusnak and A. Shapiro, “Test Results for a Heat-Treated 4-Cell 805-MHz Superconducting Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP10, pp. 1636-1638.
[n] D. Walz, R. Helm, J. Irwin, and W. R. Nelson, “Conventional Collimation and Linac Protection”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 185-188.
[n] R. Galan Muñoz, J. Casas, C. Colldelram, and M. Quispe, “CFD thermal studies of the air inside the storage ring tunnel of the ALBA synchrotron light source for the 3rd and 4th generation designs”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2576-2579. doi:10.18429/JACoW-IPAC2025-THPB030
[n] L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2961-2964.
[n] C. Bruni et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH048, pp. 146-149.
[n] G. Kazakevich, G. Romanov, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Derbenev, “On forced RF generation of CW magnetrons for superconducting accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 310-313. doi:10.18429/JACoW-LINAC2024-TUAA009
[n] R. Follath, U. Flechsig, L. Patthey, and U. H. Wagner, “The Athos Soft X-Ray Beamlines at SwissFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 535-537. doi:10.18429/JACoW-FEL2019-WEP095
[n] S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1315-1318. doi:10.18429/JACoW-IPAC2025-TUPM068
[n] S. S. Basak et al., “Analysis of redundancy design and reliability estimation of 60 kW CW RF HPA for ALS-U project at LBNL”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 506-508. doi:10.18429/JACoW-LINAC2024-TUPB089
[n] A. Schempp et al., “High current RFQ using laser ion source”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP11, pp. 315-317.
[n] S. Richter et al., “New compact modular in-vacuum undulators for SLS 2.0”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM069, unpublished.
[n] S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2206-2209.
[n] N. Marks and E. A. Hughes, “Plotting of Beam Variation with Q Value on the 5 GeV Electron Syhnchrotron Nina”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 555-558.
[n] J. Vàzquez i Mas et al., “Exploring convective heat transfer coefficients in fully developed flows: a combined CFD analysis and experimental validation for common geometries in particle accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1593-1596. doi:10.18429/JACoW-IPAC2024-TUPR76
[n] G. Danby et al., “Window Frame or Superferric" Magnet Design for Low B (
[n] C. Jamet et al., “Failure Mode and Effects Analysis of the Beam Intensity Control for the SPIRAL2 Accelerator”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF28, pp. 613-616.
[n] D. Paulic et al., “Preliminary design for beam charge monitoring interlock system for Advanced Light Source at Lawrence Berkeley National Lab”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD031, unpublished.
[n] G. Vandoni et al., “Project management structures, processes, and tools for the HL-LHC project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1656-1659. doi:10.18429/JACoW-IPAC2023-TUPA154
[n] I. Ben-Zvi et al., “Design and Construction of a High-Duty-Factor Photocathode Electron Gun”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3012-3015.
[n] M. Br?ñger et al., “Improving Alarm Handling for the TI Operators by Integrating Different Sources in One Alarm Management and Information System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 503. doi:10.18429/JACoW-ICALEPCS2019-MOPHA118
[n] J. M. Brennan et al., “On the High Intensity Aspects of AGS Booster Proton Operation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3763-3766.
[n] C. M. Lyneis, M. S. McAshan, R. E. Rand, H. A. Schwettman, T. I. Smith, and J. P. Turneaure, “The Stanford Superconducting Recyclotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3246-3249.
[n] M. Mayerhofer, V. Bencini, G. Dollinger, and M. A. Sammer, “A Carbon Minibeam Irradiation Facility Concept”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2947-2950. doi:10.18429/JACoW-IPAC2022-THPOMS006
[n] S. W. Mosko, “A New RF System for ORIC”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 416-418.
[n] A. J. Green, K. Zagar, L. Zambon, and M. Pelko, “Canone -- A Highly-Interactive Web-Based Control System Interface”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA20, pp. 129-131.
[n] R. S. Lord et al., “Energy Boosting of a Tandem Beam with the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1679-1682.
[n] M. T. Lynch et al., “Results of Adaptive Feedforward on GTA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2391-2394.
[n] G. A. Krafft et al., “Coherent Synchrotron Radiation Detector for a Non-Invasive Subpicosecond Bunch Length Monitor”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC04, pp. 2601-2603.
[n] M. Mayerhofer and G. Dollinger, “Support structures and their removal improve performance of additively manufactured RF cavities”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS67, unpublished.
[n] P. C. Burkimsher, “JCOP Experience with a Commercial SCADA Product, PVSS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU201, pp. XX-XX.
[n] R. L. Gluckstern, R. Chasman, and K. Crandall, “Stability of Phase Space Distributions in Two Dimensional Beams”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper H-6, pp. 823-849.
[n] M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4967-4970. doi:10.18429/JACoW-IPAC2023-THPM035
[n] J. Krishnaswamy, I. S. Lehrman, R. Hartley, and R. H. Austin, “Electron Transport and Emittance Diagnostics in CIRFEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA19, pp. 234-236.
[n] T. J. Shea et al., “Overview and Status of Diagnostics for the ESS Project”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 8-15. doi:10.18429/JACoW-IBIC2017-MO2AB2
[n] Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
[n] D. Sánchez-Herranz et al., “Configuration and engineering integration in the IFMIF-DONES project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2234-2236. doi:10.18429/JACoW-IPAC2023-TUPM019
[n] M. A. Goldman, P. Cameron, R. T. Sanders, and J. Tuozzolo, “Studies of Ferrite Materials for the AGS Booster Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 165-168.
[n] D. Oshatz, A. DeMello, L. Doolittle, P. Luft, J. W. Staples, and A. Zachoszcz, “Mechanical Design of the SNS MEBT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH152, pp. 1574-1576.
[n] M. Pezzetti, A. Onufrena, K. Buch, and T. Barbe, “Study design of a model-based controller for time varying delay compensation in a cryogenics process”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1266-1271. doi:10.18429/JACoW-ICALEPCS2025-WEPD109
[n] G. Biallas et al., “Making Dipoles to Spectrometer Quality using Adjustments during Measurement”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP145, pp. 3306-3308.
[n] G. Mulhollan et al., “A Derivative Standard for Polarimeter Calibration”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC21, pp. 1043-1045.
[n] I. Zilberter, B. Cowan, and S. Veitzer, “High-performance magnet simulation software”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 778-781. doi:10.18429/JACoW-IPAC2024-MOPS30
[n] A. Yue, J. Leddy, J. Cary, I. Gonin, V. Yakovlev, and J. Petillo, “Multiphysics modeling of accelerators through code integration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 775-777. doi:10.18429/JACoW-IPAC2024-MOPS29
[n] F. Zimmermann et al., “Performance of the 1994/95 SLC Final Focus System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB01, pp. 656-658.
[n] C. Steier et al., “Manufacturing, assembly and construction progress of the ALS-U project to create a soft x-ray diffraction limited light source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS058, unpublished.
[n] S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Di Carlo et al., “CI-CD Practices with the TANGO-controls Framework in the Context of the Square Kilometre Array (SKA) Telescope Project”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 114.
- M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB052, pp. 2616-2619.
- M. Ivanyan, L. V. Aslyan, K. Fl?Âttmann, and F. Lemery, “Transverse Impedance of Lossy Circular Metal-Dielectric Waveguides”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2093-2096.
- A. Zaltsman et al., “Commissioning of the EBIS-Based Heavy Ion Preinjector at Brookhaven”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper FR103, pp. 1033-1037.
- C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA059, unpublished.
- M. Syphers et al., “Helical Dipole Magnets for Polarized Protons in RHIC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P009, pp. 3359-3361.
- S. Williams, R. Dowd, R. Rassool, S. Sheehy, G. Taylor, and M. Volpi, “Evaluation of a compact electron preinjector using a low beta acceptance X-band accelerating structure”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL151, pp. 2089-2092.
- R. Barillère, J.-M. Le Goff, H. Milcent, and R. Stampfli, “Ideas on a Generic Control Systems Based on the Experience on the 4 LEP Experiments Control System”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S06SA02, pp. 246-253.
- A. I. Agueev et al., “Magnet Test Facility Control System for Superconducting Magnets of UNK”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S04SRS04, pp. 171-173.
- D. Raparia et al., “A New Medium Energy Beam Transport Line for the Proton Injector of AGS-RHIC”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP027, pp. 458-460.
- M. G. Mazarakis et al., “Transport Experiments with Neutralized and Space Charge Dominated Denutralized 2 mA 80 keV Xe! Beams”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3042-3045.
- I. S. Lehrman, J. Krishnaswamy, R. A. Hartley, and R. H. Austin, “The Northrop Grumman Compact Infrared FEL (CIRFEL)”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA31, pp. 260-262.
- A. Zaltsman et al., “EBIS Preinjector Construction Status”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP120, pp. 685-687.
- J. G. Alessi et al., “Low and Medium Energy Beam Trasport Upgrade at BNL 200 MeV Linac”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP026, pp. 455-457.
- V. P. Yakovlev et al., “Nonlinear Effects in Ferrite Tuned Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 877-880.
- M. A. Allen, L. G. Karvonen, R. A. McConnell, and H. Schwarz, “Operation of PEP Longitudinal Feedback System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2317-2320.
- A. Ratti et al., “Test Results of the AGS Booster Low Frequency RF System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1166-1169.
- K. B. Mallory, “Some Effects of (Now Having) Computer Control for the Stanford Linear Accelerator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 541-544.
- M. Popovic et al., “Novel injection locked coaxial magnetrons”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR29, pp. 1489-1491.
- A. Asoyan et al., “Beam-based alignment of magnetic system in AREAL linear accelerator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC08, pp. 2978-2981.
- J. Hetzel et al., “Algorithmic access to beam control and beam diagnostics at COSY Jülich”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR60, pp. 2638-2641.
- J. Choi, T. Lee, K. Nam, and M. Yoon, “Magnet Lattice of the Pohang Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2673-2676.
- T. J. Shea et al., “SNS Accelerator Diagnostics: Progress and Challenges”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB001, pp. 512-516.
- L. Walling, F. Brandeberry, Y. Goren, and N. Spayd, “Eddy Current Analysis for the SSC Low Energy Booster Cavity”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 880-883.
- J. Sheehan, I. S. Lehrman, M. F. Reusch, R. L. Heuer, J. Krishnaswamy, and R. Hartley, “Design and Construction of a Compact Infra Red Free Electron Laser CIRFEL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1527-1530.
- N. Us Saqib et al., “ALS storage ring RF control system upgrade plan and status”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 590-594.
- M. A. Allen and R. A. McConnell, “Operation of the Spear RF System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 373-378.
- F. Lemery and P. Piot, “Temporal Electron-bunch Shaping from a Photoinjector for Advanced Accelerator Applications”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1454-1456.
- B. Rusnak and A. Shapiro, “Test Results for a Heat-Treated 4-Cell 805-MHz Superconducting Cavity”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPP10, pp. 1636-1638.
- D. Walz, R. Helm, J. Irwin, and W. R. Nelson, “Conventional Collimation and Linac Protection”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 185-188.
- R. Galan Muñoz, J. Casas, C. Colldelram, and M. Quispe, “CFD thermal studies of the air inside the storage ring tunnel of the ALBA synchrotron light source for the 3rd and 4th generation designs”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB030, pp. 2576-2579.
- L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2961-2964.
- C. Bruni et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH048, pp. 146-149.
- G. Kazakevich, G. Romanov, R. Johnson, T. Khabiboulline, V. Yakovlev, and Y. Derbenev, “On forced RF generation of CW magnetrons for superconducting accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 310-313.
- R. Follath, U. Flechsig, L. Patthey, and U. H. Wagner, “The Athos Soft X-Ray Beamlines at SwissFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 535-537.
- S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM068, pp. 1315-1318.
- S. S. Basak et al., “Analysis of redundancy design and reliability estimation of 60 kW CW RF HPA for ALS-U project at LBNL”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 506-508.
- A. Schempp et al., “High current RFQ using laser ion source”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP11, pp. 315-317.
- S. Richter et al., “New compact modular in-vacuum undulators for SLS 2.0”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM069, unpublished.
- S. A. Smith, C. Haddock, R. Jayakumar, J. Turner, and J. Zbasnik, “Mechanical Analysis of Beam Tube Assemblies for SSC Dipoles During a Quench”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2206-2209.
- N. Marks and E. A. Hughes, “Plotting of Beam Variation with Q Value on the 5 GeV Electron Syhnchrotron Nina”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 555-558.
- J. Vàzquez i Mas et al., “Exploring convective heat transfer coefficients in fully developed flows: a combined CFD analysis and experimental validation for common geometries in particle accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR76, pp. 1593-1596.
- G. Danby et al., “Window Frame or Superferric" Magnet Design for Low B (
- C. Jamet et al., “Failure Mode and Effects Analysis of the Beam Intensity Control for the SPIRAL2 Accelerator”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF28, pp. 613-616.
- D. Paulic et al., “Preliminary design for beam charge monitoring interlock system for Advanced Light Source at Lawrence Berkeley National Lab”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD031, unpublished.
- G. Vandoni et al., “Project management structures, processes, and tools for the HL-LHC project”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA154, pp. 1656-1659.
- I. Ben-Zvi et al., “Design and Construction of a High-Duty-Factor Photocathode Electron Gun”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3012-3015.
- M. Br?ñger et al., “Improving Alarm Handling for the TI Operators by Integrating Different Sources in One Alarm Management and Information System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 503.
- J. M. Brennan et al., “On the High Intensity Aspects of AGS Booster Proton Operation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3763-3766.
- C. M. Lyneis, M. S. McAshan, R. E. Rand, H. A. Schwettman, T. I. Smith, and J. P. Turneaure, “The Stanford Superconducting Recyclotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3246-3249.
- M. Mayerhofer, V. Bencini, G. Dollinger, and M. A. Sammer, “A Carbon Minibeam Irradiation Facility Concept”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2947-2950.
- S. W. Mosko, “A New RF System for ORIC”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 416-418.
- A. J. Green, K. Zagar, L. Zambon, and M. Pelko, “Canone -- A Highly-Interactive Web-Based Control System Interface”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA20, pp. 129-131.
- R. S. Lord et al., “Energy Boosting of a Tandem Beam with the Oak Ridge Isochronous Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1679-1682.
- M. T. Lynch et al., “Results of Adaptive Feedforward on GTA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2391-2394.
- G. A. Krafft et al., “Coherent Synchrotron Radiation Detector for a Non-Invasive Subpicosecond Bunch Length Monitor”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC04, pp. 2601-2603.
- M. Mayerhofer and G. Dollinger, “Support structures and their removal improve performance of additively manufactured RF cavities”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS67, unpublished.
- P. C. Burkimsher, “JCOP Experience with a Commercial SCADA Product, PVSS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU201, pp. XX-XX.
- R. L. Gluckstern, R. Chasman, and K. Crandall, “Stability of Phase Space Distributions in Two Dimensional Beams”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper H-6, pp. 823-849.
- M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM035, pp. 4967-4970.
- J. Krishnaswamy, I. S. Lehrman, R. Hartley, and R. H. Austin, “Electron Transport and Emittance Diagnostics in CIRFEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA19, pp. 234-236.
- T. J. Shea et al., “Overview and Status of Diagnostics for the ESS Project”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 8-15.
- Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
- D. Sánchez-Herranz et al., “Configuration and engineering integration in the IFMIF-DONES project”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM019, pp. 2234-2236.
- M. A. Goldman, P. Cameron, R. T. Sanders, and J. Tuozzolo, “Studies of Ferrite Materials for the AGS Booster Synchrotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 165-168.
- D. Oshatz, A. DeMello, L. Doolittle, P. Luft, J. W. Staples, and A. Zachoszcz, “Mechanical Design of the SNS MEBT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH152, pp. 1574-1576.
- M. Pezzetti, A. Onufrena, K. Buch, and T. Barbe, “Study design of a model-based controller for time varying delay compensation in a cryogenics process”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1266-1271.
- G. Biallas et al., “Making Dipoles to Spectrometer Quality using Adjustments during Measurement”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP145, pp. 3306-3308.
- G. Mulhollan et al., “A Derivative Standard for Polarimeter Calibration”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC21, pp. 1043-1045.
- I. Zilberter, B. Cowan, and S. Veitzer, “High-performance magnet simulation software”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS30, pp. 778-781.
- A. Yue, J. Leddy, J. Cary, I. Gonin, V. Yakovlev, and J. Petillo, “Multiphysics modeling of accelerators through code integration”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS29, pp. 775-777.
- F. Zimmermann et al., “Performance of the 1994/95 SLC Final Focus System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPB01, pp. 656-658.
- C. Steier et al., “Manufacturing, assembly and construction progress of the ALS-U project to create a soft x-ray diffraction limited light source”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS058, unpublished.
- S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
Back to search