JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. Golluccio et al., “Instruments and Methods for the Magnetic Measurement of the Super-FRS Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1183-1185. doi:10.18429/JACoW-IPAC2016-TUPMB037
[n]	T. Fabry, M. Baudin, B. Feral, L. Vanherpe, and L. Tabourot, “Intervention Modelling at High-energy Particle Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1814-1816. doi:10.18429/JACoW-IPAC2014-TUPRI102
[n]	T. Kramer, Wr. Neustadt, W. Bartmann, C. Bracco, B. Goddard, and M. Meddahi, “Performance Studies for Protection against Asynchronous Dumps in the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB063, pp. 1662-1664. 
[n]	S. Russenschuck, G. Caiafa, L. Fiscarelli, M. Liebsch, C. Petrone, and P. Rogacki, “Challenges in Extracting Pseudo-Multipoles From Magnetic Measurements”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 87-92. doi:10.18429/JACoW-ICAP2018-SUPAG03
[n]	P. J. Bryant, “Antiprotons in the ISR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2047-2050. 
[n]	M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701. 
[n]	W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3607-3610. 
[n]	N. Leros and D. Schulte, “Static Beam-Based Alignment of the RF Structures in the CLIC Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI059, pp. 461-463. 
[n]	P. J. Bryant, “AUSTRON, A Central European Pulsed Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF204, pp. 108-112. 
[n]	A. Meseck, “The Impact of the Space Charge on the STARS Performance”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH056, pp. 374-377. 
[n]	D. A. G. Neet, “Beam Profile Monitors for Fast and Slow Extracted Proton Beams”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 914-919. 
[n]	S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX. 
[n]	T. Hakulinen et al., “Integration of CATIA/SMARTEAM into CERN's Corporate Engineering Data Management System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC130, pp. 1374-1376. 
[n]	P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412. 
[n]	R. T. Neuenschwander, L. Liu, S. R. Marques, A. R. D. Rodrigues, and R. M. Seraphim, “Engineering Challenges of Future Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1308-1313. doi:10.18429/JACoW-IPAC2015-TUXC2
[n]	S. R. Conviser, “The Stanford Two-Mile Linear Accelerator Vacuum System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 699-705. 
[n]	C. C. Iliescu, “Pole Face Shape Design in High-Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 387-392. 
[n]	J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1981-1984. 
[n]	J. I. M. Botman and H. L. Hagedoorn, “EUTERPE, A Ring Facility for the Eindhoven Cyclotron Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 488-491. 
[n]	W. A. Ortiz, R. T. Neuenschwander, and F. W. B. Talarico, “Magnetic Measurements at LNLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 378-381. 
[n]	A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2886-2889. doi:10.18429/JACoW-IPAC2018-THXGBD4
[n]	M. Bajko et al., “Geometric and Magnetic Axes of the LHC Dipole”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH071, pp. 3392-3394. 
[n]	P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 401-404. doi:10.18429/JACoW-ICALEPCS2015-MOPGF136
[n]	K. Brand and J. P. Gourber, “A Magnetic Beam Positron Detector”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1812-1815. 
[n]	K. Diamantis, M. Bonora-Tam, M. Buzio, V. Di Capua, and D. Giloteaux, “Online performance monitoring and early fault detection for the B-train real-time field measurement systems at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6136, unpublished. 
[n]	H. H. Tsai, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, and H. C. Li, “Efficiency Analysis for the Cryogenic System at NSRRC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD044, pp. 2512-2514. 
[n]	H. Brochna, “Effect of Nuclear Radiation on Magent Insulation in High-Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 683-689. 
[n]	V. V. Parkhomchuk, A. A. Sery, and D. Shiltsev, “Compensation of Coherent Tune Shift of Betatron Oscillation in Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 529-532. 
[n]	F. Schutte, H. L. Hagedoorn, G. C. L. van Heusden, and A. J. M. van Vliet, “The Automatic Control of the Eindhoven A.V.F. Cyclotron II: Measurements”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 524-531. 
[n]	J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159. 
[n]	A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 781-784. 
[n]	J. Tinlot and D. Green, “A Storage Ring for 10 BeV Muons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 470-476. 
[n]	E. L. Hoyt and E. L. Garwin, “Accelerator Vacuum Problems: In-Line Oil Trapping Between the Stanford Linear Accelerator and the Beam Switchyard”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 740-743. 
[n]	P. J. Bryant, “AGILE, A Tool for Interactive Lattice Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B03, pp. 1357-1359. 
[n]	M. Bajko, F. Savary, and W. Scandale, “Geometry and Alignment Requirements for the LHC Main Dipole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A07, pp. 2160-2162. 
[n]	J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1405-1408. 
[n]	S. Keskar, H. Bartosik, and C. Carli, “A low Energy Polarizer Ring for FCC-ee”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5048, unpublished. 
[n]	F. S. Reinath and D. T. Scalise, “Design Concepts of Modern Accelerator Vacuum Systems - Prediction vs. Experimental Data”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 734-740. 
[n]	W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1155-1158. doi:10.18429/JACoW-IPAC2025-TUPB103
[n]	A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
[n]	E. Sanchez-Corral Mena et al., “Data Management and Tools for the Access to the Radiological Areas at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC057, pp. 226-229. 
[n]	T. Pettersson et al., “LHC Access System: from Design to Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC129, pp. 1371-1373. 
[n]	X. Y. Chang et al., “Study of Secondary Emission Enhanced Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE042, pp. 2711-2713. 
[n]	K. K. Gillies et al., “Trends in Software for Large Astronomy Projects”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB03, pp. 13-17. 
[n]	N. Leros and D. Schulte, “Feedback Response in the CLIC Main Linac to Transverse and Longitudinal Dynamic Imperfections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI060, pp. 464-466. 
[n]	P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037. 
[n]	T. W. Birtwistle et al., “360 Degree Panoramic Photographs During the Long Shutdown 2 of the CERN Machines and Facilities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3410-3412. doi:10.18429/JACoW-IPAC2021-WEPAB315
[n]	C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2624-2627. 
[n]	S. Alden et al., “Progress and Developments of Beam Delivery Simulation (BDSIM)”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5138, unpublished. 
[n]	D. Schulte, G. Guignard, N. Leros, and E. T. d'Amico, “Simulation Package based on PLACET”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH082, pp. 3033-3035. 
[n]	P. J. Bryant, “The Creation of Small Interaction Diamonds in the CERN Intersecting Storage Rings (ISR)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 773-777. 
[n]	N. N. Alexeev et al., “ITEP-TWAC STATUS REPORT”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBAU02, pp. XX-XX. 
[n]	S. Barabin et al., “Multifunction Test-Bench For Heavy Ion Sources”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM27, pp. XX-XX. 
[n]	P. Jurj, R. Kamath, K. Long, J. Pasternak, and C. Rogers, “Simulation and study of the Muon Cooling Demonstrator Rectilinear Channel in BDSIM”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1048, unpublished. 
[n]	B. A. Baklakov, P. K. Lebedev, V. V. Parkhomchuk, A. A. Sery, V. D. Shiltsev, and A. I. Sleptsov, “Investigation of Seismic Vibrations and Relative Displacements of Linear Collider VLEPP Elements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3273-3276. 
[n]	A. Suwalska, A. Arnalich, F. Deperraz, M. Munoz Codoceo, and P. Ninin, “CERN SPS Sprinkler System: A Customized Industrial Solution for a Non-Conventional Site”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3313-3315. doi:10.18429/JACoW-IPAC2021-WEPAB283
[n]	P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326. 
[n]	A. Lu, V. Kain, C. Petrone, V. Di Capua, M. Schenk, and C. Zannini, “First operational experience with data-driven hysteresis compensation for the main dipole magnets of the CERN SPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 874-877. doi:10.18429/JACoW-IPAC2024-MOPS66
[n]	D. Schulte et al., “CLIC Simulations from the Start of the Linac to the Interaction Point”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI045, pp. 500-502. 
[n]	J. Zhao, A. Chao, X. Deng, Z. Pan, and C. Tang, “Lattice design to achieve reversible microbunching in a steady-state microbunching (SSMB) storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5611, unpublished. 
[n]	H. T. Lau, “Beam Tracking Simulations for Stage 1 of the Laser-Hybrid Accelerator for Radiobiological Applications (LhARA)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2939-2942. doi:10.18429/JACoW-IPAC2021-WEPAB139
[n]	W. Shields et al., “A Status update of LhARA, an Accelerator-driven Radiobiology Research Initiative”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP8018, unpublished. 
[n]	A.-L. Perrot et al., “Configuration management of the CERN accelerators complex on the road to long shutdown 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 579-581. doi:10.18429/JACoW-IPAC2023-MOPL028
[n]	A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX. 
[n]	E. Manola-Poggioli and L. Scibile, “CERN Safety Alarms Monitoring System (CSAM)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH156, pp. 2293-2295. 
[n]	C. Whyte and K. Long, “LhARA, the laser-hybrid accelerator for radiobiological applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5049-5051. doi:10.18429/JACoW-IPAC2023-THPM066
[n]	R. Kamath et al., “Implementation and simulation of a rectilinear cooling channel in BDSIM”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 647-650. doi:10.18429/JACoW-IPAC2025-MOPS024
[n]	J. I. M. Botman, H. L. Hagedoorn, and J. Reich, “The Beam Emittance of Cyclotrons with an Axial Injection System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 651-654. 
[n]	S. M. Pattalwar et al., “New Connection Cryostat to Insert FP420 Proton Tagging Detector in the LHC Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA001, pp. 103-105. 
[n]	W. Wu, X. Deng, Z. Pan, and C. Tang, “One possible approach for intrabeam scattering calculation of arbitrary phase space distributions”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5666, unpublished. 
[n]	J. A. Uythoven, J. I. M. Botman, and H. L. Hagedoorn, “Analytical Evaluation of Synchrotron Radiation Integrals for Isomagnetic Lattices with Rectangular Dipole Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 649-651. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search