Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. H. Wu and Y.-J. Chen, “End-to-End Energy Variation Study for Induction Radiography Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 804-806. doi:10.18429/JACoW-IPAC2017-MOPIK114
[n] T. Y. Chung, C. H. Chang, C.-S. Hwang, and H. W. Luo, “Quantitative Analysis of Multipole Errors Induced by Mechanical Deformations of an Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4321-4324. doi:10.18429/JACoW-IPAC2018-THPMK014
[n] R. Parodi et al., “Production and Test of the Prototype =0.85 Five Cell Cavity for the TRASCO Project”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP034, pp. 512-515.
[n] D. R. Xu, Z. H. Bai, L. Wang, W. Wang, and H. Xu, “Corrector Layout Optimization Using NSGA-II for HALS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4629-4631. doi:10.18429/JACoW-IPAC2018-THPMK135
[n] O. Rey Orozko, A. Apollonio, M. Jonker, and J. A. Uythoven, “Availability Allocation to Particle Accelerators Subsystems by Complexity Criteria”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2009-2012. doi:10.18429/JACoW-IPAC2018-WEPAF075
[n] Y. Shimosaki et al., “Lattice Design for 5MeV-125mA CW RFQ Operation in the LIPAc”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 977-979. doi:10.18429/JACoW-IPAC2019-MOPTS051
[n] I. Podadera Aliseda and L. Soby, “Precision Beam Position Monitor for EUROTeV”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB03, pp. 57-59.
[n] A. Jansson and L. Soby, “A Non-Invasive Single-Bunch Matching and Emittance Monitor for the CERN PS based on Quadrupole Pick-Ups”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB005, pp. 528-530.
[n] O. R. Jones, P. Cameron, and Y. Luo, “Towards a Robust Phase Locked Loop Tune Feedback System”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW025, pp. XX-XX.
[n] C. Pagani, “Superconducting RF Activities at INFN Milano-LASA”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP008, pp. 58-61.
[n] H. A. Thiessen, F. Neri, K. R. Rust, and D. B. Redd, “Multi-Pulse Extraction from Los Alamos Proton Storage Ring for Radiographic Applications”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P021, pp. 273-275.
[n] OP. Odier, M. Ludwig, and S. Thoulet, “The DCCT for the LHC Beam Intensity Measurement”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD45, pp. 143-145.
[n] S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 438-441. doi:10.18429/JACoW-SRF2023-TUPTB024
[n] R. Stassen et al., “Superconductive Test Cavity for the ESS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH130, pp. 1080-1082.
[n] D. Prasuhn et al., “Status of the Cooler Synchrotron COSY Juelich”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH054, pp. 3350-3352.
[n] G. Iori et al., “Design and Ray-Tracing of the BEATS Beamline of SESAME”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 246. doi:10.18429/JACoW-MEDSI2020-WEPA10
[n] J. Y. Li et al., “Operational Status of HLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4155-4158. doi:10.18429/JACoW-IPAC2016-THPOY028
[n] M. Attal and E. Huttel, “Multipoles and Alignment Error Limits for the SESAME Storage Ring Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3035-3037. doi:10.18429/JACoW-IPAC2014-THPRO068
[n] P. Cameron, M. Gasior, O. R. Jones, and C.-Y. Tan, “The Effects and Possible Origins of Mains Ripple in the Vicinity of the Betatron Spectrum”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM005, pp. XX-XX.
[n] T. Günzel, “Quadrupolar multibunch detuning in the ALBA storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3425-3427. doi:10.18429/JACoW-IPAC2023-WEPL136
[n] C. Pagani, “Advances in Cryomodule Design and New Approches”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA005, pp. 555-559.
[n] H. Y. Barminova, N. N. Alexeev, A. Golubev, T. Kulevoy, A. Sitnikov, and T. Tretyakova, “Simulation of Hollow Ion Beam Formation Line”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB018, pp. 353-354.
[n] Y. Luo and W. Fischer, “6-D Weak-strong Simulation of Head-on Beam-beam Compensation in the RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE102, pp. 4758-4760.
[n] Z. H. Bai and L. Wang, “Super-Period Multi-Bend Achromat Lattice with Interleaved Dispersion Bumps for the HALS Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3597-3599. doi:10.18429/JACoW-IPAC2018-THPAK147
[n] M. G. Minty et al., “Measurement of Beam Optics During Acceleration in the Relativistic Heavy Ion Collider”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA08, pp. 538-540.
[n] H. Boschman et al., “Testing of the Large Bore Single Aperture 1-metre Superconducting Dipoles Made with Phenolic Inserts”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP08H, pp. 2008-2010.
[n] C. Liu et al., “Near Real-time ORM Measurements and SVD Matrix Generation for 10 Hz Global Orbit Feedback In RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP056, pp. 2226-2228.
[n] Z. H. Bai, W. Li, L. Wang, P. H. Yang, and Z. H. Yang, “Design of the Second Version of the HALS Storage Ring Lattice”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4601-4604. doi:10.18429/JACoW-IPAC2018-THPMK121
[n] N. Tagdulang, T. Günzel, P. Krkotic, J. O'Callaghan Castella, and M. Pont, “Evaluation of the impact of REBCO-coated conductors on the resistive wall impedance of the FCC-hh”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3421-3424. doi:10.18429/JACoW-IPAC2023-WEPL135
[n] U. Bechstedt et al., “The Performance of COSY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
[n] S. K. Sharma, F. A. DePaola, F. C. Lincoln, and J. L. Tuozzolo, “Deformable RF Fingers with Axial Extension”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 15-19. doi:10.18429/JACoW-MEDSI2018-TUOPMA08
[n] W. Fischer, Y. Luo, and C. Montag, “Bunch Length Effects in the Beam-beam Compensation with an Electron Lens”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE100, pp. 4755-4757.
[n] C. Antoine, “RF Material Investigation by Sample Analysis”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D12, pp. 899-910.
[n] V. Mertens, G. Berard, J. H. Dieperink, R. Finiel, W. Kalbreier, and M. Ninet, “Surveillance and Diagnostic Tools for the LEP Beam Separation System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 851-854.
[n] M. Attal, “Influence of the Vacuum Chamber Limitation on Dynamic Aperture Calculations”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA021, pp. 2543-2545.
[n] M. Aiba and M. B?Âge, “Local Orbit Response Matrix Measurement at SLS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1713-1715. doi:10.18429/JACoW-IPAC2015-TUPJE044
[n] N. Winters, F. Becker, and M. V. Ricciardi, “Integrated Project Planning as a Central Steering Tool for the Large Scale Multi Project FAIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 842-844. doi:10.18429/JACoW-IPAC2017-MOPIK128
[n] D. A. Kayran, A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “TRANSVERSE EMITTANCE MEASUREMENTS IN HIGH-POWER FIR FEL ENERGY-RECOVERY LINAC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP14, pp. XX-XX.
[n] F. Becker et al., “Establishing a Project Management Office for the Large Scale Multi Project FAIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 835-838. doi:10.18429/JACoW-IPAC2017-MOPIK126
[n] R. Toelle et al., “COSY-SCL, the Superconducting Injector Linac for COSY”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA009, pp. 598-600.
[n] Y. H. Xu et al., “Design and Research of Secondary Electron Emission Test Equipment with Low Electron Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2970-2972. doi:10.18429/JACoW-IPAC2015-WEPMN021
[n] O. Rey Orozko, A. Apollonio, S. S. Erhard, G. Guidoboni, B. Mikulec, and J. A. Uythoven, “Performance Evaluation of Linac4 During the Reliability Run”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2016-2019. doi:10.18429/JACoW-IPAC2018-WEPAF077
[n] Z. H. Yang, Z. H. Bai, W. Li, G. Liu, and L. Wang, “Study of GF Symplectic Tracking Method and Compensation for the EPU104 at the HLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3603-3605. doi:10.18429/JACoW-IPAC2018-THPAK152
[n] G. Wu, L. Cooley, H. Edwards, and C. Antoine, “Review of SRF Materials Workshop”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TU204, pp. XX-XX.
[n] W. Kaabi et al., “Power Couplers for XFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO001, pp. 2310-2312.
[n] A. Aryshev, Y. Honda, K. Lekomtsev, M. Shevelev, N. Terunuma, and J. Urakawa, “Cs2Te Photocathode Response Time Measurements and Femtosecond Comb Electron Beam Generation as a Milestone Towards Pre-Bunched Thz Fel Realization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3941-3943. doi:10.18429/JACoW-IPAC2016-THPOW007
For LaTeX
Use Complete Form
For BibTeX
References
- Y. H. Wu and Y.-J. Chen, “End-to-End Energy Variation Study for Induction Radiography Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 804-806.
- T. Y. Chung, C. H. Chang, C.-S. Hwang, and H. W. Luo, “Quantitative Analysis of Multipole Errors Induced by Mechanical Deformations of an Undulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4321-4324.
- R. Parodi et al., “Production and Test of the Prototype =0.85 Five Cell Cavity for the TRASCO Project”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP034, pp. 512-515.
- D. R. Xu, Z. H. Bai, L. Wang, W. Wang, and H. Xu, “Corrector Layout Optimization Using NSGA-II for HALS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4629-4631.
- O. Rey Orozko, A. Apollonio, M. Jonker, and J. A. Uythoven, “Availability Allocation to Particle Accelerators Subsystems by Complexity Criteria”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2009-2012.
- Y. Shimosaki et al., “Lattice Design for 5MeV-125mA CW RFQ Operation in the LIPAc”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 977-979.
- I. Podadera Aliseda and L. Soby, “Precision Beam Position Monitor for EUROTeV”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB03, pp. 57-59.
- A. Jansson and L. Soby, “A Non-Invasive Single-Bunch Matching and Emittance Monitor for the CERN PS based on Quadrupole Pick-Ups”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB005, pp. 528-530.
- O. R. Jones, P. Cameron, and Y. Luo, “Towards a Robust Phase Locked Loop Tune Feedback System”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW025, pp. XX-XX.
- C. Pagani, “Superconducting RF Activities at INFN Milano-LASA”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOP008, pp. 58-61.
- H. A. Thiessen, F. Neri, K. R. Rust, and D. B. Redd, “Multi-Pulse Extraction from Los Alamos Proton Storage Ring for Radiographic Applications”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P021, pp. 273-275.
- OP. Odier, M. Ludwig, and S. Thoulet, “The DCCT for the LHC Beam Intensity Measurement”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD45, pp. 143-145.
- S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB024, pp. 438-441.
- R. Stassen et al., “Superconductive Test Cavity for the ESS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH130, pp. 1080-1082.
- D. Prasuhn et al., “Status of the Cooler Synchrotron COSY Juelich”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH054, pp. 3350-3352.
- G. Iori et al., “Design and Ray-Tracing of the BEATS Beamline of SESAME”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 246.
- J. Y. Li et al., “Operational Status of HLS-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4155-4158.
- M. Attal and E. Huttel, “Multipoles and Alignment Error Limits for the SESAME Storage Ring Magnets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3035-3037.
- P. Cameron, M. Gasior, O. R. Jones, and C.-Y. Tan, “The Effects and Possible Origins of Mains Ripple in the Vicinity of the Betatron Spectrum”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM005, pp. XX-XX.
- T. Günzel, “Quadrupolar multibunch detuning in the ALBA storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL136, pp. 3425-3427.
- C. Pagani, “Advances in Cryomodule Design and New Approches”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper THA005, pp. 555-559.
- H. Y. Barminova, N. N. Alexeev, A. Golubev, T. Kulevoy, A. Sitnikov, and T. Tretyakova, “Simulation of Hollow Ion Beam Formation Line”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB018, pp. 353-354.
- Y. Luo and W. Fischer, “6-D Weak-strong Simulation of Head-on Beam-beam Compensation in the RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE102, pp. 4758-4760.
- Z. H. Bai and L. Wang, “Super-Period Multi-Bend Achromat Lattice with Interleaved Dispersion Bumps for the HALS Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3597-3599.
- M. G. Minty et al., “Measurement of Beam Optics During Acceleration in the Relativistic Heavy Ion Collider”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA08, pp. 538-540.
- H. Boschman et al., “Testing of the Large Bore Single Aperture 1-metre Superconducting Dipoles Made with Phenolic Inserts”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP08H, pp. 2008-2010.
- C. Liu et al., “Near Real-time ORM Measurements and SVD Matrix Generation for 10 Hz Global Orbit Feedback In RHIC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP056, pp. 2226-2228.
- Z. H. Bai, W. Li, L. Wang, P. H. Yang, and Z. H. Yang, “Design of the Second Version of the HALS Storage Ring Lattice”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4601-4604.
- N. Tagdulang, T. Günzel, P. Krkotic, J. O'Callaghan Castella, and M. Pont, “Evaluation of the impact of REBCO-coated conductors on the resistive wall impedance of the FCC-hh”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL135, pp. 3421-3424.
- U. Bechstedt et al., “The Performance of COSY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
- S. K. Sharma, F. A. DePaola, F. C. Lincoln, and J. L. Tuozzolo, “Deformable RF Fingers with Axial Extension”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 15-19.
- W. Fischer, Y. Luo, and C. Montag, “Bunch Length Effects in the Beam-beam Compensation with an Electron Lens”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE100, pp. 4755-4757.
- C. Antoine, “RF Material Investigation by Sample Analysis”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D12, pp. 899-910.
- V. Mertens, G. Berard, J. H. Dieperink, R. Finiel, W. Kalbreier, and M. Ninet, “Surveillance and Diagnostic Tools for the LEP Beam Separation System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 851-854.
- M. Attal, “Influence of the Vacuum Chamber Limitation on Dynamic Aperture Calculations”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA021, pp. 2543-2545.
- M. Aiba and M. B?Âge, “Local Orbit Response Matrix Measurement at SLS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1713-1715.
- N. Winters, F. Becker, and M. V. Ricciardi, “Integrated Project Planning as a Central Steering Tool for the Large Scale Multi Project FAIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 842-844.
- D. A. Kayran, A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “TRANSVERSE EMITTANCE MEASUREMENTS IN HIGH-POWER FIR FEL ENERGY-RECOVERY LINAC”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP14, pp. XX-XX.
- F. Becker et al., “Establishing a Project Management Office for the Large Scale Multi Project FAIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 835-838.
- R. Toelle et al., “COSY-SCL, the Superconducting Injector Linac for COSY”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA009, pp. 598-600.
- Y. H. Xu et al., “Design and Research of Secondary Electron Emission Test Equipment with Low Electron Energy”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2970-2972.
- O. Rey Orozko, A. Apollonio, S. S. Erhard, G. Guidoboni, B. Mikulec, and J. A. Uythoven, “Performance Evaluation of Linac4 During the Reliability Run”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2016-2019.
- Z. H. Yang, Z. H. Bai, W. Li, G. Liu, and L. Wang, “Study of GF Symplectic Tracking Method and Compensation for the EPU104 at the HLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3603-3605.
- G. Wu, L. Cooley, H. Edwards, and C. Antoine, “Review of SRF Materials Workshop”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TU204, pp. XX-XX.
- W. Kaabi et al., “Power Couplers for XFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO001, pp. 2310-2312.
- A. Aryshev, Y. Honda, K. Lekomtsev, M. Shevelev, N. Terunuma, and J. Urakawa, “Cs2Te Photocathode Response Time Measurements and Femtosecond Comb Electron Beam Generation as a Milestone Towards Pre-Bunched Thz Fel Realization”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3941-3943.
Back to search