JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Nie et al., “Full Characterization of the Bunch-Compressor Dipoles for FLUTE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1585-1588. doi:10.18429/JACoW-IPAC2021-TUPAB087
[n]	W. B. Li, P. Lu, B. G. Sun, F. F. Wu, Y. L. Yang, and Z. R. Zhou, “Design and Simulation of the Transverse Feedback Kicker for the HLSII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO008, pp. 496-498. 
[n]	A. Matheisen et al., “Industrialization of European XFEL Preparation Cycle ``Final EP '' at Research Instruments Company”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP040, pp. 201-204. 
[n]	J. H. Kim et al., “Upgrade of Vacuum Control System for Komac Linac and Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1358-1360. doi:10.18429/JACoW-ICALEPCS2017-THPHA012
[n]	L. J. Nevay et al., “Beam Delivery Simulation: BDSIM - Development & Optimisation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 182-184. doi:10.18429/JACoW-IPAC2014-MOPRO045
[n]	S. P. Yun et al., “Initial Operation of the Low-Flux Proton Beamline at the KOMAC 100 MeV Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 585-588. doi:10.18429/JACoW-IPAC2017-MOPIK038
[n]	H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Vertical Test of PEFP Prototype SRF Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC101, pp. 307-309. 
[n]	W. Zhang et al., “Pulsed Power Applications in High Intensity Proton Rings”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB007, pp. 568-572. 
[n]	Y. H. Wu and Y. J. Chen, “Optimization of Linear Induction Radiography Accelerator with Electron Beam with Energy Variation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 546-548. doi:10.18429/JACoW-NAPAC2016-TUPOB24
[n]	Y. H. Wu, Y. J. Chen, and J. Ellsworth, “Unfolding Electron Beam Parameters Using Spot Size Measurement From Magnet Scan”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 549-551. doi:10.18429/JACoW-NAPAC2016-TUPOB25
[n]	C. Yao et al., “Preliminary Test Results of a Prototype Fast Kicker for APS MBA Upgrade”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 950-952. doi:10.18429/JACoW-NAPAC2016-WEPOB24
[n]	J. H. Ko, I. S. Ko, H.-S. Kang, C. Kim, and G. Kim, “Coherent Synchrotron Radiation Monitor for Microbunching Instability in XFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 115-117. doi:10.18429/JACoW-LINAC2018-MOPO040
[n]	W. Liu and E. Wang, “Propose a Non-Destructive Stern-Gerlach Apparatus  for Measuring the Spin Polarization of Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2763-2765. doi:10.18429/JACoW-IPAC2019-WEPGW113
[n]	G. H. Schroeder, J. Bonthond, U. Jansson, H. Kuhn, M. Mayer, and G. Vossenberg, “The Injection Kicker System of LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1381-1384. 
[n]	M. Wendt, M. Betz, O. R. Jones, T. Lefevre, and T. E. Levens, “Improvements to the LHC Schottky Monitors”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 453-456. doi:10.18429/JACoW-IBIC2016-TUPG46
[n]	W. Zhou, A. N. Fang, and W. Z. Tang, “A Novel Small Period Electromagnetic Undulator for Free Electron Lasers”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 786-789. 
[n]	Th. Weiler, R. W. Assmann, C. Bracco, V. Previtali, and S. Redaelli, “Beam Cleaning and Beam Loss Control”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD08, pp. 359-362. 
[n]	M. Mayer, G. Howard, H. Kuhn, G. H. Schroeder, and G. Wilkinson, “Metallized Ceramic Vacuum Chambers for the LEP Injection Kicker Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1378-1381. 
[n]	Y. H. Wu and J. Ellsworth, “Summary of Beam Operation Capability at FXR LIA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3316-3319. doi:10.18429/JACoW-IPAC2018-THPAK045
[n]	D. Bruno, W. Eng, G. Ganetis, R. F. Lambiase, and J. Sandberg, “Overview of the RHIC Insertion Region, Sextupole, and Snake Power Supply Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH004, pp. 3663-3665. 
[n]	P. Yang et al., “Conceptual Design of a High-Performance Injector Based on Rf-Gated Gridded Thermionic Gun for Thz Fel”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2046-2049. doi:10.18429/JACoW-IPAC2019-TUPTS052
[n]	F. Zimmermann et al., “Updated High-Energy LHC Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 524-527. doi:10.18429/JACoW-IPAC2019-MOPMP037
[n]	K. A. Brown et al., “Status of Slow Extraction of High Intensity Protons from Brookhaven's AGS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE003, pp. 1545-1547. 
[n]	G. Y. Kong and W. Zhou, “The Backward Mode in an Electromagnetically Pumped Free Electron Laser”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1211-1214. 
[n]	Y. Yang et al., “High Precision Synchronization Development for HiRES, the Ultrafast Electron Diffraction Beamline at LBNL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2262-2264. doi:10.18429/JACoW-IPAC2018-WEPAL040
[n]	W. Singer et al., “Advances in Large Grain/Single Crystal SC Resonators at DESY”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAKI01, pp. 2569-2571. 
[n]	C. Pagani, J. Camon, and G. Varisco, “Very High Performance Sliding Short for RF Resonators Tuning”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-09, pp. 361-364. 
[n]	D. Bruno et al., “RHIC Power Supplies: Lessons Learned From the 1999 - 2001 RHIC Runs”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE002, pp. 743-745. 
[n]	H.-J. Kwon et al., “Design of the 100 MeV Proton Beam Line for Low Flux Application”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 938-940. doi:10.18429/JACoW-IPAC2016-MOPOY040
[n]	C. Pagani, “Advances in RF Technology for Cyclotrons”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-01, pp. 501-510. 
[n]	A. Hershcovitch et al., “Effect of oxygen and other impurities on copper coating conductivity at cryogenic temperatures”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4396-4399. doi:10.18429/JACoW-IPAC2023-THPA185
[n]	T. Kramer, B. Goddard, M. Gyr, A. Koschik, J. A. Uythoven, and Th. Weiler, “Apertures in the LHC Beam Dump System and Beam Losses during Beam Abort”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP064, pp. 2665-2667. 
[n]	Y.-S. Cho et al., “Installation of 100-MeV Proton Linac for PEFP”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP043, pp. 3832-3834. 
[n]	S. Kiy et al., “Beam Tuning Automation Activities at TRIUMF”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 52-56. doi:10.18429/JACoW-HIAT2022-TU2C4
[n]	C. Piel, K. Dunkel, M. Pekeler, H. Vogel, and P. vom Stein, “Beam Operation of the SARAF Light Ion Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN011, pp. 1410-1412. 
[n]	L. Lin, G. Huang, C. Li, Y. T. Liu, and W. Zhou, “Development of the HLS 40kW Solid State Amplifier”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI033, pp. 2777-2779. 
[n]	F. M. Velotti et al., “Investigation of the Remanent Field of the SPS Main Dipoles and Possible Solutions for Machine Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4069-4072. doi:10.18429/JACoW-IPAC2017-THPAB146
[n]	D. Bruno, G. Ganetis, R. F. Lambiase, and J. Sandberg, “RHIC Insertion Region, Shunt Power Supply Current Errors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH003, pp. 3660-3662. 
[n]	M. Blaskiewicz, “Comparing New Models of Transverse Instability with Simulations”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR097, pp. 3165-3167. 
[n]	W.-D. M?Âller, “High Power Coupler for the TESLA Test Facility”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA010, pp. 577-581. 
[n]	Y. H. Wu and Y.-J. Chen, “ENSOLVE : A Simulation Code for FXR LIA Downstream Section”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2271-2273. doi:10.18429/JACoW-IPAC2018-WEPAL044
[n]	A. Apollonio et al., “Reliability Approach for Machine Protection Design in Particle Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI045, pp. 3388-3390. 
[n]	I. Marneris et al., “Pulsing a 4.1 MW Motor Generator System to 34 MW Peak Power under Constant Input Power Operation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA163, pp. 3767-3769. 
[n]	E. Gschwendtner et al., “Design and Performance of the CNGS Secondary Beam Line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN095, pp. 1601-1603. 
[n]	J. H. Ko and H.-S. Kang, “Terahertz FEL Simulation in PAL XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 77-79. doi:10.18429/JACoW-FEL2019-TUP017
[n]	J. Z. Xu, R. I. Farnsworth, N. O. Strelnikov, and I. Vasserman, “Control System for the LCLS-II Undulator Prototype”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1173-1174. doi:10.18429/JACoW-IPAC2015-MOPWI013
[n]	W. Zhang et al., “A New Conceptual Design of the SNS Full Turn Fast Extraction Kicker Power Supply System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH022, pp. 3714-3716. 
[n]	H. Garcia, A. Latina, and R. Tomas, “Traditional Final Focus System for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR022, pp. 1858-1860. 
[n]	R. I. Farnsworth, “Motion Controls Using EPICS and Galil Controllers”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP056, pp. XX-XX. 
[n]	S. Pirani et al., “Investigation of HOM Frequency Shifts Induced by Mechanical Tolerances”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1071-1073. doi:10.18429/JACoW-IPAC2017-MOPVA091
[n]	A. N. Matveenko et al., “The Magnets of BERLinPro: Specification, Design, Measurement and Quality Analysis”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4124-4126. doi:10.18429/JACoW-IPAC2017-THPIK012
[n]	N. Delerue, J. Barros, M. Vieille Grosjean, O. A. Bezshyyko, and V. Khodnevych, “Study of Phase Reconstruction Techniques applied to Smith-Purcell Radiation Measurements”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3436-3438. doi:10.18429/JACoW-IPAC2014-THPME088

For LaTeX

Use Complete Form

For BibTeX

References

Back to search