Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. J. Gee and B. Erdelyi, “Study and Comparison of the Method of Moments and the Single Level Fast Multipole Method for 2D Space Charge Tracking”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA15, pp. 207-209.
[n] L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
[n] A. J. Gee and B. Erdelyi, “A Differential Algebraic Framework for the Fast Indirect Boundary Element Method”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3107-3109. doi:10.18429/JACoW-IPAC2016-WEPOY050
[n] E. Mahner, F. Caspers, and T. Kroyer, “Experimental Electron Cloud Studies in the CERN Proton Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP049, pp. 1655-1657.
[n] R. Anne, A. Lefol, G. Milleret, and R. Perret, “Secondary Emission Detector System for SATURNE II”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1754-1756.
[n] D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1158-1161.
[n] C. J. Bocchetta, D. Bulfone, J.-C. Denard, and M. Plesko, “The Diagnostic Line for the Acceptance Tests of the ELETTRA 100 MeV Pre-Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1097-1100.
[n] F. S. Labrecque et al., “Cyclotron Injection Tests of High-Intensity H2+ Beam”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT026, pp. 372-374.
[n] K. Kim et al., “Design of a 1.2 GeV Synchrotron Light Source for X-Ray Lithography at Samsung Heavy Industries”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR03, pp. 269-271.
[n] J. C. Frisch et al., “Beam Measurements at LCLS”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOIOTIO02, pp. 17-26.
[n] T. Emoto et al., “PNC High Power CW Electron Linac Status (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-53, pp. 181-183.
[n] S.-H. Jeong, J. Choi, D. E. Kim, and K.-H. Park, “Digital Power Supply for Air Core Magnet”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH085, pp. 445-447.
[n] I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322.
[n] J. Bahrdt et al., “Cryogenic Design of a PrFeB-Based Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD012, pp. 3111-3113.
[n] C. Vaccarezza et al., “Status of the SPARC-X Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN039, pp. 1001-1003.
[n] C. K. Gelbke, “Physics with Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-08, pp. 42-47.
[n] H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1434-1436. doi:10.18429/JACoW-IPAC2019-TUPGW019
[n] F. Marti et al., “Stopping Of Energetic Radioactive Ions Using Cyclotron Principles”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 487-492.
[n] J. Cao, “The Progress Of BEPCII Storage Ring Diagnostics System”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOVTC03, pp. 41-45.
[n] M. Nomura et al., “Condition of MA Cores in the RF Cavities of J-PARC Synchrotrons after Several Years of Operation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA022, pp. 3723-3725.
[n] L. K. Nguyen et al., “Active Pointing Stabilization Techniques Applied to the Low Energy RHIC Electron Cooling Laser Transport at BNL”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 938-941. doi:10.18429/JACoW-NAPAC2019-THYBA6
[n] S. Burger, E. Bravin, G. Ferioli, G. J. Focker, A. Guerrero Ollacarizqueta, and R. Maccaferri, “A New TV Beam Observation System for CERN”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT030, pp. 214-216.
[n] H. Tomizawa et al., “Non-destructive Real-time Monitor to Measure 3D Bunch Charge Distribution with Arrival Timing to Maximize 3D Overlapping for HHG-Seeded EUV-FEL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB080, pp. 657-659.
[n] A. Pepato et al., “Construction of the Modules of the IFMIF-EVEDA RFQ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP087, pp. 257-260.
[n] O. Tcherbakoff et al., “Seeding SPARC Facility with Harmonic Generation in Gases: Preliminary Tests of the Harmonic Generation in Gas Chamber”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH047, pp. 142-145.
[n] X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 831-834. doi:10.18429/JACoW-IPAC2017-MOPIK125
[n] A. Neumann et al., “Status of the HOM Calculations for the BERLinPro Main Linac Cavity”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRAAC3, pp. 278-280.
[n] C. Xu et al., “Design of an Ultra-Compact Stripline BPM Receiver using MicroTCA for LCLS-II at SLAC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC23, pp. 731-734.
[n] K. Fuchsberger and G. H. Hemelsoet, “LHC Online Chromaticity Measurement - Experience After One Year of Operation”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 20-23. doi:10.18429/JACoW-IBIC2016-MOBL04
[n] M. Lamont et al., “The SPS Beam Dump Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2389-2391. doi:10.18429/JACoW-IPAC2017-TUPVA126
[n] K. L. Jensen et al., “Theory and Modeling of Electron Emission from Cesiated Semiconductor Surfaces”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP082, pp. 566-566.
[n] D. R. Bett, P. Burrows, G. B. Christian, C. Perry, and R. L. Ramjiawan, “Real-Time Beam Orbit Stabilisation to 200 Nanometres in Single-Pass Mode Using a High-Precision Dual-Phase Feedback System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4049-4052. doi:10.18429/JACoW-IPAC2019-THPRB096
[n] Y. Batygin, A. Goto, and Y. Yano, “Nonlinear Beam Dynamics Effects in Heavy Ion Transport Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP094L, pp. 2497-2502.
[n] M. Dehnel, “INDUSTRIAL BEAMLINE DESIGN FOR RADIOISOTOPE PRODUCTION”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P05, pp. XX-XX.
[n] M. Yoshii et al., “The Status of the J-PARC RF Systems”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC134, pp. 385-387.
[n] L. Giannessi et al., “FEL Experiments at SPARC”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPB18, pp. 294-297.
[n] A. Goto et al., “Construction of a New Pre-Injector System for the RILAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-09, pp. 202-205.
[n] E. Guetlich, W. Ensinger, P. Forck, and B. Walasek-H?Âhne, “High Current Ion Beam Investigations on Inorganic Scintillation Screens”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB04, pp. 167-169.
[n] J.-L. Bouly et al., “Recent Developments in ECR Ion Sources”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-3, pp. XX-XX.
[n] A. Mosnier et al., “The Accelerator Prototype of the IFMIF/EVEDA Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC056, pp. 588-590.
[n] A. Miura, K. Moriya, and T. Miyao, “Application of Carbon Nanotube Wire for Beam Profile Measurement of Negative Hydrogen Ion Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5022-5025. doi:10.18429/JACoW-IPAC2018-FRXGBD3
[n] A. Seryi et al., “ATF2 Commissioning”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209.
[n] O. Boine-Frankenheim, I. Hofmann, and V. Kornilov, “Instabilities and Space Charge Effects in High Intensity Ring Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEXFI01, pp. 1882-1886.
[n] X. H. Zhang, J. W. Xia, and Y. J. Yuan, “One Design of Heavy Ion Linac Injector for CSRm”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB043, pp. 573-575.
[n] W. L. Xia et al., “High RF Power Test of Coupled RFQ-SFRFQ Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP113, pp. 689-691.
[n] M. Tobiyama et al., “Beam Commissioning of SuperKEKB Rings at Phase 1”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 6-10. doi:10.18429/JACoW-IBIC2016-MOAL03
[n] J. T. Bradley III, L. N. Merrill, G. Rouleau, W. Roybal, and G. Sanchez, “Test Results of the Low-Stored-Energy -80 kV Regulator for Ion Sources at LANSCE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1369-1371. doi:10.18429/JACoW-IPAC2019-TUPMP053
[n] D. Celeste, E. Bravin, S. Burger, and F. Roncarolo, “Development and Test of a Beam Imaging System Based on Radiation Tolerant Optical Fiber Bundles”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2658-2660. doi:10.18429/JACoW-IPAC2019-WEPGW078
[n] Y. Dutheil et al., “Beam Transfer Line Design to the SPS Beam Dump Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 751-753. doi:10.18429/JACoW-IPAC2018-TUPAF032
[n] S. G. Arutunian, “Vibrating Wire Sensors For Beam Instrumentation”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOSTFA01, pp. 1-7.
[n] D. T. L. Jones, “Present Status and Future Trends of Heavy Particle Radiotherapy”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-02, pp. 13-20.
[n] U. Becker et al., “New Simulation Results for the S-DALINAC Electron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA154, pp. 2951-2953.
[n] L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 35-38. doi:10.18429/JACoW-ECRIS2016-MOFO01
[n] R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2514-2517. doi:10.18429/JACoW-IPAC2019-WEPGW021
For LaTeX
Use Complete Form
For BibTeX
References
- A. J. Gee and B. Erdelyi, “Study and Comparison of the Method of Moments and the Single Level Fast Multipole Method for 2D Space Charge Tracking”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA15, pp. 207-209.
- L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
- A. J. Gee and B. Erdelyi, “A Differential Algebraic Framework for the Fast Indirect Boundary Element Method”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3107-3109.
- E. Mahner, F. Caspers, and T. Kroyer, “Experimental Electron Cloud Studies in the CERN Proton Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP049, pp. 1655-1657.
- R. Anne, A. Lefol, G. Milleret, and R. Perret, “Secondary Emission Detector System for SATURNE II”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1754-1756.
- D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1158-1161.
- C. J. Bocchetta, D. Bulfone, J.-C. Denard, and M. Plesko, “The Diagnostic Line for the Acceptance Tests of the ELETTRA 100 MeV Pre-Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1097-1100.
- F. S. Labrecque et al., “Cyclotron Injection Tests of High-Intensity H2+ Beam”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT026, pp. 372-374.
- K. Kim et al., “Design of a 1.2 GeV Synchrotron Light Source for X-Ray Lithography at Samsung Heavy Industries”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR03, pp. 269-271.
- J. C. Frisch et al., “Beam Measurements at LCLS”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper MOIOTIO02, pp. 17-26.
- T. Emoto et al., “PNC High Power CW Electron Linac Status (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-53, pp. 181-183.
- S.-H. Jeong, J. Choi, D. E. Kim, and K.-H. Park, “Digital Power Supply for Air Core Magnet”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH085, pp. 445-447.
- I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322.
- J. Bahrdt et al., “Cryogenic Design of a PrFeB-Based Undulator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD012, pp. 3111-3113.
- C. Vaccarezza et al., “Status of the SPARC-X Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN039, pp. 1001-1003.
- C. K. Gelbke, “Physics with Cyclotrons”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-08, pp. 42-47.
- H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1434-1436.
- F. Marti et al., “Stopping Of Energetic Radioactive Ions Using Cyclotron Principles”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 487-492.
- J. Cao, “The Progress Of BEPCII Storage Ring Diagnostics System”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper MOVTC03, pp. 41-45.
- M. Nomura et al., “Condition of MA Cores in the RF Cavities of J-PARC Synchrotrons after Several Years of Operation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA022, pp. 3723-3725.
- L. K. Nguyen et al., “Active Pointing Stabilization Techniques Applied to the Low Energy RHIC Electron Cooling Laser Transport at BNL”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 938-941.
- S. Burger, E. Bravin, G. Ferioli, G. J. Focker, A. Guerrero Ollacarizqueta, and R. Maccaferri, “A New TV Beam Observation System for CERN”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT030, pp. 214-216.
- H. Tomizawa et al., “Non-destructive Real-time Monitor to Measure 3D Bunch Charge Distribution with Arrival Timing to Maximize 3D Overlapping for HHG-Seeded EUV-FEL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB080, pp. 657-659.
- A. Pepato et al., “Construction of the Modules of the IFMIF-EVEDA RFQ”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP087, pp. 257-260.
- O. Tcherbakoff et al., “Seeding SPARC Facility with Harmonic Generation in Gases: Preliminary Tests of the Harmonic Generation in Gas Chamber”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH047, pp. 142-145.
- X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 831-834.
- A. Neumann et al., “Status of the HOM Calculations for the BERLinPro Main Linac Cavity”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRAAC3, pp. 278-280.
- C. Xu et al., “Design of an Ultra-Compact Stripline BPM Receiver using MicroTCA for LCLS-II at SLAC”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC23, pp. 731-734.
- K. Fuchsberger and G. H. Hemelsoet, “LHC Online Chromaticity Measurement - Experience After One Year of Operation”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 20-23.
- M. Lamont et al., “The SPS Beam Dump Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2389-2391.
- K. L. Jensen et al., “Theory and Modeling of Electron Emission from Cesiated Semiconductor Surfaces”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP082, pp. 566-566.
- D. R. Bett, P. Burrows, G. B. Christian, C. Perry, and R. L. Ramjiawan, “Real-Time Beam Orbit Stabilisation to 200 Nanometres in Single-Pass Mode Using a High-Precision Dual-Phase Feedback System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4049-4052.
- Y. Batygin, A. Goto, and Y. Yano, “Nonlinear Beam Dynamics Effects in Heavy Ion Transport Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP094L, pp. 2497-2502.
- M. Dehnel, “INDUSTRIAL BEAMLINE DESIGN FOR RADIOISOTOPE PRODUCTION”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P05, pp. XX-XX.
- M. Yoshii et al., “The Status of the J-PARC RF Systems”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC134, pp. 385-387.
- L. Giannessi et al., “FEL Experiments at SPARC”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPB18, pp. 294-297.
- A. Goto et al., “Construction of a New Pre-Injector System for the RILAC”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-09, pp. 202-205.
- E. Guetlich, W. Ensinger, P. Forck, and B. Walasek-H?Âhne, “High Current Ion Beam Investigations on Inorganic Scintillation Screens”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB04, pp. 167-169.
- J.-L. Bouly et al., “Recent Developments in ECR Ion Sources”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper G-3, pp. XX-XX.
- A. Mosnier et al., “The Accelerator Prototype of the IFMIF/EVEDA Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC056, pp. 588-590.
- A. Miura, K. Moriya, and T. Miyao, “Application of Carbon Nanotube Wire for Beam Profile Measurement of Negative Hydrogen Ion Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 5022-5025.
- A. Seryi et al., “ATF2 Commissioning”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209.
- O. Boine-Frankenheim, I. Hofmann, and V. Kornilov, “Instabilities and Space Charge Effects in High Intensity Ring Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEXFI01, pp. 1882-1886.
- X. H. Zhang, J. W. Xia, and Y. J. Yuan, “One Design of Heavy Ion Linac Injector for CSRm”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB043, pp. 573-575.
- W. L. Xia et al., “High RF Power Test of Coupled RFQ-SFRFQ Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP113, pp. 689-691.
- M. Tobiyama et al., “Beam Commissioning of SuperKEKB Rings at Phase 1”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 6-10.
- J. T. Bradley III, L. N. Merrill, G. Rouleau, W. Roybal, and G. Sanchez, “Test Results of the Low-Stored-Energy -80 kV Regulator for Ion Sources at LANSCE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1369-1371.
- D. Celeste, E. Bravin, S. Burger, and F. Roncarolo, “Development and Test of a Beam Imaging System Based on Radiation Tolerant Optical Fiber Bundles”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2658-2660.
- Y. Dutheil et al., “Beam Transfer Line Design to the SPS Beam Dump Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 751-753.
- S. G. Arutunian, “Vibrating Wire Sensors For Beam Instrumentation”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper MOSTFA01, pp. 1-7.
- D. T. L. Jones, “Present Status and Future Trends of Heavy Particle Radiotherapy”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-02, pp. 13-20.
- U. Becker et al., “New Simulation Results for the S-DALINAC Electron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA154, pp. 2951-2953.
- L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 35-38.
- R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2514-2517.
Back to search