Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Zhang et al., “Installation and Initial Result of the DRAGON-I" Induction Linac"”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM402, pp. XX-XX.
[n] S. H. Liu et al., “Preliminary Design of Superconducting Cavity Test Platform in CSNS Campus”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1104-1106. doi:10.18429/JACoW-SRF2019-THP086
[n] L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
[n] A. Matheisen et al., “Investigations to Understand the Origin of Degradation of Super Conducting Cavities found in Acceleration Modules at DESY”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO045, pp. 486-489.
[n] M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
[n] M. Xiao, “Transport from the Recycler Ring to the Antiproton Source Beamlines”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR086, pp. 2026-2028.
[n] G. Staats, H. Buettig, P. Michel, A. Buechner, and F. Gabriel, “Microphonics Measurements at ELBA”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 39, pp. 89-94.
[n] J. Zasadzinski et al., “Raman Spectroscopy as a Probe of Surface Oxides and Hydrides on Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO072, pp. 912-916.
[n] Y. Kamiya, A. Araki, M. Katoh, and M. Kihara, “Low Emittance Optics of Photon Factory Storage Ring at KEK”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 455-458.
[n] O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2113-2116. doi:10.18429/JACoW-IPAC2019-TUPTS083
[n] B. Babacan et al., “Pre-commissioning of the wide-dynamic range halo monitor to be installed in the Fermilab MI-8 line”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 513-517. doi:10.18429/JACoW-IBIC2025-TUPMO21
[n] D. Reschke, “Performance of Superconducting Cavities for the European XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3186-3191. doi:10.18429/JACoW-IPAC2016-THYB01
[n] N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
[n] U. Lehnert, A. Buechner, B. Lange, R. Schurig, and R. Steinbr?â, “BPM Electronics for the ELBE Linear Accelerator - a Comparison”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 75-77. doi:10.18429/JACoW-IBIC2016-MOPG15
[n] F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 257-261. doi:10.18429/JACoW-MEDSI2016-WEAA02
[n] A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Survey and Alignment of Photon Factory Storage Ring at KEK”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1777-1780.
[n] A. Buechner, H. Buettig, R. Schurig, G. Staats, and A. Winter, “Results of ELBE Window and Coupler Tests with a Resonant Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD024, pp. 1479-1481.
[n] Y. Kobayashi, A. Araki, and Y. Kamiya, “A Test of a 3-GeV Operation at the Photon Factory Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 483-486.
[n] D. J. Liska, N. Bultman, and L. O. Carlisle, “Thermal Design of Drift Tubes for High-Gradient Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-4, pp. 46-47.
[n] G. M. A. Duller, D. R. Hall, and A. Stallwood, “F-Switch: Novel 'Random Access' Manipulator for Large Numbers of Compound Refractive Lenses”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 345-347. doi:10.18429/JACoW-MEDSI2016-WEPE22
[n] M. Holz and V. G. Ziemann, “Dynamics of Spectator Particles in Space-Charge Fields of Mismatched Beams With Cross-Plane Coupling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4462-4464. doi:10.18429/JACoW-IPAC2017-THPVA021
[n] S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
[n] D. Wang et al., “Optimization Parameter Design of a Circular e+e- Higgs Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME021, pp. 1616-1618.
[n] Y. Dabin, R. Barrett, SJ. Jarjayes, and M. Sanchez del Rio, “A New X-Ray Beam for the ESRF Beamlines, Opto-Mechanical Global Survey”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 316-320. doi:10.18429/JACoW-MEDSI2018-THOAMA06
[n] G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911.
[n] K. J. Hazelwood, I. Kourbanis, G. E. Krafczyk, and M.-J. Yang, “Automating Orbit Correction in the Main Injector 8 GeV Line”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2070-2072. doi:10.18429/JACoW-IPAC2018-WEPAG004
[n] J. Kral, M. Büchler, J. Georg, J. Roever, and M. K. Czwalinna, “High-performance bunch arrival time monitors with fs precision at DESY”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 832-835. doi:10.18429/JACoW-IBIC2025-THBC01
[n] L. Zhang et al., “2 MeV LIA Injector Design”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4110, pp. 332-334.
[n] C. Nemoz et al., “A Control System for the ESRF Synchrotron Radiation Therapy Clinical Trials”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB02, pp. 521-524.
[n] M. Xiao and J. Gao, “Analytical Estimations of the Dynamic Apertures of Beams with Momentum Deviation and Application in FFAG”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA022, pp. 2546-2548.
[n] A. Lueangaramwong et al., “Experimental Investigation of Field-Emission From Silicon Nano-Cone Cathodes”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 548-550. doi:10.18429/JACoW-IPAC2017-MOPIK022
[n] A. Buechner and B. Lange, “A New High-Dynamic Range BPM for ELBE with Integrated Differential Current Monitor (DCM)”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC22, pp. 104-107.
[n] L. N. Sheng et al., “Heavy Ions Radiography Facility at IMP”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH10, pp. 48-50.
[n] R. Hou et al., “Field Measurements of PEP-II LER Dipoles and Quadrupoles at IHEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P020, pp. 3297-3299.
[n] S. Rimjaem et al., “Tuning and Conditioning of a New High Gradient Gun Cavity at PITZ”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC078, pp. 244-246.
[n] A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Measurement of Betatron Function at the Photon Factory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1272-1275.
[n] H. Hassanzadegan et al., “Beam Current Monitor System of the European Spallation Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP041, pp. 526-528.
[n] R. Baker et al., “ESRF Double Crystal Monochromator Prototype Project”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 440-444. doi:10.18429/JACoW-MEDSI2018-FROAMA07
[n] C. Cao et al., “Probing Hot Spot and Cold Spot of SRF Cavities with Tunneling and Raman Spectroscopies”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP019, pp. 466-468.
[n] A. Ando, A. Araki, K. Endo, T. Igarashi, T. Kasuga, and M. Kihara, “Beam Lifetime in the Initial Operation of KEK Main Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1530-1533.
[n] R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268. doi:10.18429/JACoW-SRF2021-MOPCAV006
[n] S. Nozawa, “Upgrade the Beamline PF-AR NW14A for the High-Repetition-Rate X-Ray Pump-Probe Experiments”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 351-352. doi:10.18429/JACoW-MEDSI2016-WEPE26
[n] H. Ito, A. Araki, K. Umemori, and K. Takahashi, “Systematic Investigation of Mid-T Furnace Baking for High-Q Performance”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 881. doi:10.18429/JACoW-SRF2021-FROFDV01
[n] D. A. White and M. L. Stowell, “Discretizing Transient Curent Densities in the Maxwell Equations”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TH1IODN04, pp. 212-217.
[n] U. Lehnert, V. B. Asgegar, P. Michel, G. Staats, J. Teichert, and R. Wuensch, “Gain Deterioration at Particular Wavelengths in a Partially Waveguided FEL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH016, pp. 36-38.
[n] C. E. Gonzalez-Ortiz, R. Ainsworth, and P. N. Ostroumov, “Third-Order Resonance Compensation at the FNAL Recycler Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 195-198. doi:10.18429/JACoW-IPAC2022-MOPOST050
[n] O. Mohsen et al., “Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1604-1607. doi:10.18429/JACoW-IPAC2021-TUPAB098
[n] O. Mohsen et al., “Beam Dynamics Simulations for a Conduction-Cooled Superconducting RF Electron Source”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 213-216. doi:10.18429/JACoW-NAPAC2019-MOPLH19
[n] M. G. Grzegrzolka, K. Czuba, and I. Rutkowski, “Concept of Cavity Simulator for European Spallation Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1666-1669. doi:10.18429/JACoW-ICALEPCS2017-THPHA123
[n] D. Reschke, “Challenges in ILC SCRF Technology”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper MOOPMA01, pp. 26-30.
[n] S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n] K. Chen et al., “An Application of Cyclotron Beam to the Study of Radiation Damage in Metals”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-17, pp. 657-659.
[n] C. E. Gonzalez-Ortiz, R. Ainsworth, and P. N. Ostroumov, “Compensation of Third-order Resonances in the High Intensity Regime”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 215-221. doi:10.18429/JACoW-HB2023-WEA2I1
[n] H. Wang et al., “Dragon-I Linear Induction Accelerator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP009, pp. 49-51.
[n] O. Mohsen, R. Ainsworth, and N. Eddy, “Waker Experiments at Fermilab Recycler Ring”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 124-127. doi:10.18429/JACoW-NAPAC2022-MOPA33
[n] O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2113-2116. doi:10.18429/JACoW-IPAC2019-TUPTS083
[n] N. Chelidze, R. Ainsworth, and K. J. Hazelwood, “The Effect of the Main Injector Ramp on the Recycler”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 90-92. doi:10.18429/JACoW-NAPAC2022-MOPA19
[n] D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 192-195. doi:10.18429/JACoW-NAPAC2019-MOPLH10
[n] I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “Local Oscillator Rear Transition Module for 704.42 MHz LLRF Control System at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 517. doi:10.18429/JACoW-ICALEPCS2019-MOPHA124
[n] J. R. Berlioz et al., “Synchronous High-Frequency Distributed Readout for Edge Processing at the Fermilab Main Injector and Recycler”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 79-82. doi:10.18429/JACoW-NAPAC2022-MOPA15
[n] Y. Hashimoto et al., “A Wide Dynamic-Range Halo Monitor for 8 GeV Proton Beams at FNAL”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 75-78. doi:10.18429/JACoW-NAPAC2022-MOPA14
[n] C. Shi, H. Chen, W. Huang, A. Li, J. Shi, and H. Zha, “Proof-of-principle experimental design of solenoid-based relativistic electron beam pulse compression”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP8604, unpublished.
[n] M. Brendike et al., “ESRF-Double Crystal Monochromator Prototype - Control Concept”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 777. doi:10.18429/JACoW-ICALEPCS2019-TUCPL05
[n] J. Pham et al., “Standardizing MicroTCA integration into the TANGO control system via ChimeraTK and OPC UA at SOLEIL”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 724-728. doi:10.18429/JACoW-ICALEPCS2025-TUPD099
[n] P. Marion, C. Colldelram, and Y.-M. Abiven, “The LEAPS-INNOV 5.2 Interferometers Based Online Metrology Development Program”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUPB01, pp. XX-XX.
[n] A. Narayanan et al., “Optimizing Mu2e Spill Regulation System Algorithms”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4281-4284. doi:10.18429/JACoW-IPAC2021-THPAB243
[n] D. A. White, M. Checchin, D. Gonnella, J. Hogan, J. T. Maniscalco, and R. D. Porter, “Cryomodule Storage for LCLS-II HE”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 282-285. doi:10.18429/JACoW-SRF2023-MOPMB074
[n] R. S. P. Chillara, A. Wilson, C. D. Lai, D. A. White, S. Saraf, and Z. Huang, “Vacuum monitoring and controls acceptance testing for LCLS-II HE cryomodules at SLAC”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 719-724. doi:10.18429/JACoW-ICALEPCS2025-TUPD097
[n] A. Arnold, H. Buettig, D. Janssen, G. Staats, and J. Teichert, “Field reconstruction by passband frequency measurement at the Rossendorf SRF-gun cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP77, pp. XX-XX.
[n] H. Buettig et al., “Tests of air cooled 1.3 GHz waveguide windows using a RF coupler test bench based on a resonant ring”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP81, pp. XX-XX.
[n] H. Aoyagi and S. Takahashi, “Mechanical Design of Pulse-by-Pulse X-Ray Beam Position Monitor Using Diamond Heat Sink”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 333-335. doi:10.18429/JACoW-MEDSI2016-WEPE10
[n] M. Schütte, J. Georg, A. Grünhagen, and H. Schlarb, “Concept and Design of an Extensible Middle-Layer Application Framework for Accelerator Operations and Development”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 30-33. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO02
[n] K. J. Hazelwood et al., “Real-Time Edge AI for Distributed Systems (READS): Progress on Beam Loss De-Blending for the Fermilab Main Injector and Recycler”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 912-915. doi:10.18429/JACoW-IPAC2021-MOPAB288
For LaTeX
Use Complete Form
For BibTeX
References
- K. Zhang et al., “Installation and Initial Result of the DRAGON-I" Induction Linac"”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM402, pp. XX-XX.
- S. H. Liu et al., “Preliminary Design of Superconducting Cavity Test Platform in CSNS Campus”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1104-1106.
- L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
- A. Matheisen et al., “Investigations to Understand the Origin of Degradation of Super Conducting Cavities found in Acceleration Modules at DESY”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO045, pp. 486-489.
- M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
- M. Xiao, “Transport from the Recycler Ring to the Antiproton Source Beamlines”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR086, pp. 2026-2028.
- G. Staats, H. Buettig, P. Michel, A. Buechner, and F. Gabriel, “Microphonics Measurements at ELBA”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 39, pp. 89-94.
- J. Zasadzinski et al., “Raman Spectroscopy as a Probe of Surface Oxides and Hydrides on Niobium”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO072, pp. 912-916.
- Y. Kamiya, A. Araki, M. Katoh, and M. Kihara, “Low Emittance Optics of Photon Factory Storage Ring at KEK”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 455-458.
- O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2113-2116.
- B. Babacan et al., “Pre-commissioning of the wide-dynamic range halo monitor to be installed in the Fermilab MI-8 line”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 513-517.
- D. Reschke, “Performance of Superconducting Cavities for the European XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3186-3191.
- N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
- U. Lehnert, A. Buechner, B. Lange, R. Schurig, and R. Steinbr?â, “BPM Electronics for the ELBE Linear Accelerator - a Comparison”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 75-77.
- F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 257-261.
- A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Survey and Alignment of Photon Factory Storage Ring at KEK”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1777-1780.
- A. Buechner, H. Buettig, R. Schurig, G. Staats, and A. Winter, “Results of ELBE Window and Coupler Tests with a Resonant Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD024, pp. 1479-1481.
- Y. Kobayashi, A. Araki, and Y. Kamiya, “A Test of a 3-GeV Operation at the Photon Factory Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 483-486.
- D. J. Liska, N. Bultman, and L. O. Carlisle, “Thermal Design of Drift Tubes for High-Gradient Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-4, pp. 46-47.
- G. M. A. Duller, D. R. Hall, and A. Stallwood, “F-Switch: Novel 'Random Access' Manipulator for Large Numbers of Compound Refractive Lenses”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 345-347.
- M. Holz and V. G. Ziemann, “Dynamics of Spectator Particles in Space-Charge Fields of Mismatched Beams With Cross-Plane Coupling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4462-4464.
- S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
- D. Wang et al., “Optimization Parameter Design of a Circular e+e- Higgs Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME021, pp. 1616-1618.
- Y. Dabin, R. Barrett, SJ. Jarjayes, and M. Sanchez del Rio, “A New X-Ray Beam for the ESRF Beamlines, Opto-Mechanical Global Survey”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 316-320.
- G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911.
- K. J. Hazelwood, I. Kourbanis, G. E. Krafczyk, and M.-J. Yang, “Automating Orbit Correction in the Main Injector 8 GeV Line”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2070-2072.
- J. Kral, M. Büchler, J. Georg, J. Roever, and M. K. Czwalinna, “High-performance bunch arrival time monitors with fs precision at DESY”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 832-835.
- L. Zhang et al., “2 MeV LIA Injector Design”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4110, pp. 332-334.
- C. Nemoz et al., “A Control System for the ESRF Synchrotron Radiation Therapy Clinical Trials”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB02, pp. 521-524.
- M. Xiao and J. Gao, “Analytical Estimations of the Dynamic Apertures of Beams with Momentum Deviation and Application in FFAG”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA022, pp. 2546-2548.
- A. Lueangaramwong et al., “Experimental Investigation of Field-Emission From Silicon Nano-Cone Cathodes”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 548-550.
- A. Buechner and B. Lange, “A New High-Dynamic Range BPM for ELBE with Integrated Differential Current Monitor (DCM)”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC22, pp. 104-107.
- L. N. Sheng et al., “Heavy Ions Radiography Facility at IMP”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH10, pp. 48-50.
- R. Hou et al., “Field Measurements of PEP-II LER Dipoles and Quadrupoles at IHEP”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P020, pp. 3297-3299.
- S. Rimjaem et al., “Tuning and Conditioning of a New High Gradient Gun Cavity at PITZ”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC078, pp. 244-246.
- A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Measurement of Betatron Function at the Photon Factory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1272-1275.
- H. Hassanzadegan et al., “Beam Current Monitor System of the European Spallation Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP041, pp. 526-528.
- R. Baker et al., “ESRF Double Crystal Monochromator Prototype Project”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 440-444.
- C. Cao et al., “Probing Hot Spot and Cold Spot of SRF Cavities with Tunneling and Raman Spectroscopies”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP019, pp. 466-468.
- A. Ando, A. Araki, K. Endo, T. Igarashi, T. Kasuga, and M. Kihara, “Beam Lifetime in the Initial Operation of KEK Main Ring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1530-1533.
- R. Katayama et al., “High-Q/High-G R&D at KEK Using 9-Cell TESLA-Shaped Niobium Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 268.
- S. Nozawa, “Upgrade the Beamline PF-AR NW14A for the High-Repetition-Rate X-Ray Pump-Probe Experiments”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 351-352.
- H. Ito, A. Araki, K. Umemori, and K. Takahashi, “Systematic Investigation of Mid-T Furnace Baking for High-Q Performance”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 881.
- D. A. White and M. L. Stowell, “Discretizing Transient Curent Densities in the Maxwell Equations”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TH1IODN04, pp. 212-217.
- U. Lehnert, V. B. Asgegar, P. Michel, G. Staats, J. Teichert, and R. Wuensch, “Gain Deterioration at Particular Wavelengths in a Partially Waveguided FEL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH016, pp. 36-38.
- C. E. Gonzalez-Ortiz, R. Ainsworth, and P. N. Ostroumov, “Third-Order Resonance Compensation at the FNAL Recycler Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 195-198.
- O. Mohsen et al., “Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1604-1607.
- O. Mohsen et al., “Beam Dynamics Simulations for a Conduction-Cooled Superconducting RF Electron Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 213-216.
- M. G. Grzegrzolka, K. Czuba, and I. Rutkowski, “Concept of Cavity Simulator for European Spallation Source”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1666-1669.
- D. Reschke, “Challenges in ILC SCRF Technology”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper MOOPMA01, pp. 26-30.
- S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 345.
- K. Chen et al., “An Application of Cyclotron Beam to the Study of Radiation Damage in Metals”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-17, pp. 657-659.
- C. E. Gonzalez-Ortiz, R. Ainsworth, and P. N. Ostroumov, “Compensation of Third-order Resonances in the High Intensity Regime”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA2I1, pp. 215-221.
- H. Wang et al., “Dragon-I Linear Induction Accelerator”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP009, pp. 49-51.
- O. Mohsen, R. Ainsworth, and N. Eddy, “Waker Experiments at Fermilab Recycler Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 124-127.
- O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2113-2116.
- N. Chelidze, R. Ainsworth, and K. J. Hazelwood, “The Effect of the Main Injector Ramp on the Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 90-92.
- D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 192-195.
- I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “Local Oscillator Rear Transition Module for 704.42 MHz LLRF Control System at ESS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 517.
- J. R. Berlioz et al., “Synchronous High-Frequency Distributed Readout for Edge Processing at the Fermilab Main Injector and Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 79-82.
- Y. Hashimoto et al., “A Wide Dynamic-Range Halo Monitor for 8 GeV Proton Beams at FNAL”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 75-78.
- C. Shi, H. Chen, W. Huang, A. Li, J. Shi, and H. Zha, “Proof-of-principle experimental design of solenoid-based relativistic electron beam pulse compression”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP8604, this conference.
- M. Brendike et al., “ESRF-Double Crystal Monochromator Prototype - Control Concept”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 777.
- J. Pham et al., “Standardizing MicroTCA integration into the TANGO control system via ChimeraTK and OPC UA at SOLEIL”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 724-728.
- P. Marion, C. Colldelram, and Y.-M. Abiven, “The LEAPS-INNOV 5.2 Interferometers Based Online Metrology Development Program”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper TUPB01, pp. XX-XX.
- A. Narayanan et al., “Optimizing Mu2e Spill Regulation System Algorithms”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4281-4284.
- D. A. White, M. Checchin, D. Gonnella, J. Hogan, J. T. Maniscalco, and R. D. Porter, “Cryomodule Storage for LCLS-II HE”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB074, pp. 282-285.
- R. S. P. Chillara, A. Wilson, C. D. Lai, D. A. White, S. Saraf, and Z. Huang, “Vacuum monitoring and controls acceptance testing for LCLS-II HE cryomodules at SLAC”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 719-724.
- A. Arnold, H. Buettig, D. Janssen, G. Staats, and J. Teichert, “Field reconstruction by passband frequency measurement at the Rossendorf SRF-gun cavity”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP77, pp. XX-XX.
- H. Buettig et al., “Tests of air cooled 1.3 GHz waveguide windows using a RF coupler test bench based on a resonant ring”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP81, pp. XX-XX.
- H. Aoyagi and S. Takahashi, “Mechanical Design of Pulse-by-Pulse X-Ray Beam Position Monitor Using Diamond Heat Sink”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 333-335.
- M. Schütte, J. Georg, A. Grünhagen, and H. Schlarb, “Concept and Design of an Extensible Middle-Layer Application Framework for Accelerator Operations and Development”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO02, pp. 30-33.
- K. J. Hazelwood et al., “Real-Time Edge AI for Distributed Systems (READS): Progress on Beam Loss De-Blending for the Fermilab Main Injector and Recycler”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 912-915.
Back to search