Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Golluccio et al., “Instruments and Methods for the Magnetic Measurement of the Super-FRS Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1183-1185. doi:10.18429/JACoW-IPAC2016-TUPMB037
[n] T. Fabry, M. Baudin, B. Feral, L. Vanherpe, and L. Tabourot, “Intervention Modelling at High-energy Particle Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1814-1816. doi:10.18429/JACoW-IPAC2014-TUPRI102
[n] T. Kramer, Wr. Neustadt, W. Bartmann, C. Bracco, B. Goddard, and M. Meddahi, “Performance Studies for Protection against Asynchronous Dumps in the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB063, pp. 1662-1664.
[n] S. Russenschuck, G. Caiafa, L. Fiscarelli, M. Liebsch, C. Petrone, and P. Rogacki, “Challenges in Extracting Pseudo-Multipoles From Magnetic Measurements”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 87-92. doi:10.18429/JACoW-ICAP2018-SUPAG03
[n] P. J. Bryant, “Antiprotons in the ISR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2047-2050.
[n] M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
[n] W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
[n] N. Leros and D. Schulte, “Static Beam-Based Alignment of the RF Structures in the CLIC Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI059, pp. 461-463.
[n] P. J. Bryant, “AUSTRON, A Central European Pulsed Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF204, pp. 108-112.
[n] A. Meseck, “The Impact of the Space Charge on the STARS Performance”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH056, pp. 374-377.
[n] D. A. G. Neet, “Beam Profile Monitors for Fast and Slow Extracted Proton Beams”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 914-919.
[n] S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
[n] T. Hakulinen et al., “Integration of CATIA/SMARTEAM into CERN's Corporate Engineering Data Management System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC130, pp. 1374-1376.
[n] P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412.
[n] R. T. Neuenschwander, L. Liu, S. R. Marques, A. R. D. Rodrigues, and R. M. Seraphim, “Engineering Challenges of Future Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1308-1313. doi:10.18429/JACoW-IPAC2015-TUXC2
[n] S. R. Conviser, “The Stanford Two-Mile Linear Accelerator Vacuum System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 699-705.
[n] C. C. Iliescu, “Pole Face Shape Design in High-Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 387-392.
[n] J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
[n] J. I. M. Botman and H. L. Hagedoorn, “EUTERPE, A Ring Facility for the Eindhoven Cyclotron Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 488-491.
[n] W. A. Ortiz, R. T. Neuenschwander, and F. W. B. Talarico, “Magnetic Measurements at LNLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 378-381.
[n] A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2886-2889. doi:10.18429/JACoW-IPAC2018-THXGBD4
[n] M. Bajko et al., “Geometric and Magnetic Axes of the LHC Dipole”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH071, pp. 3392-3394.
[n] P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 401-404. doi:10.18429/JACoW-ICALEPCS2015-MOPGF136
[n] K. Brand and J. P. Gourber, “A Magnetic Beam Positron Detector”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1812-1815.
[n] K. Diamantis, M. Bonora-Tam, M. Buzio, V. Di Capua, and D. Giloteaux, “Online performance monitoring and early fault detection for the B-train real-time field measurement systems at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6136, unpublished.
[n] H. H. Tsai, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, and H. C. Li, “Efficiency Analysis for the Cryogenic System at NSRRC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD044, pp. 2512-2514.
[n] H. Brochna, “Effect of Nuclear Radiation on Magent Insulation in High-Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 683-689.
[n] V. V. Parkhomchuk, A. A. Sery, and D. Shiltsev, “Compensation of Coherent Tune Shift of Betatron Oscillation in Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 529-532.
[n] F. Schutte, H. L. Hagedoorn, G. C. L. van Heusden, and A. J. M. van Vliet, “The Automatic Control of the Eindhoven A.V.F. Cyclotron II: Measurements”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 524-531.
[n] J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
[n] A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 781-784.
[n] J. Tinlot and D. Green, “A Storage Ring for 10 BeV Muons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 470-476.
[n] E. L. Hoyt and E. L. Garwin, “Accelerator Vacuum Problems: In-Line Oil Trapping Between the Stanford Linear Accelerator and the Beam Switchyard”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 740-743.
[n] P. J. Bryant, “AGILE, A Tool for Interactive Lattice Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B03, pp. 1357-1359.
[n] M. Bajko, F. Savary, and W. Scandale, “Geometry and Alignment Requirements for the LHC Main Dipole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A07, pp. 2160-2162.
[n] J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
[n] S. Keskar, H. Bartosik, and C. Carli, “A low Energy Polarizer Ring for FCC-ee”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5048, unpublished.
[n] F. S. Reinath and D. T. Scalise, “Design Concepts of Modern Accelerator Vacuum Systems - Prediction vs. Experimental Data”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 734-740.
[n] W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1155-1158. doi:10.18429/JACoW-IPAC2025-TUPB103
[n] A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
[n] E. Sanchez-Corral Mena et al., “Data Management and Tools for the Access to the Radiological Areas at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC057, pp. 226-229.
[n] T. Pettersson et al., “LHC Access System: from Design to Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC129, pp. 1371-1373.
[n] X. Y. Chang et al., “Study of Secondary Emission Enhanced Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE042, pp. 2711-2713.
[n] K. K. Gillies et al., “Trends in Software for Large Astronomy Projects”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB03, pp. 13-17.
[n] N. Leros and D. Schulte, “Feedback Response in the CLIC Main Linac to Transverse and Longitudinal Dynamic Imperfections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI060, pp. 464-466.
[n] P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037.
[n] T. W. Birtwistle et al., “360 Degree Panoramic Photographs During the Long Shutdown 2 of the CERN Machines and Facilities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3410-3412. doi:10.18429/JACoW-IPAC2021-WEPAB315
[n] C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2624-2627.
[n] S. Alden et al., “Progress and Developments of Beam Delivery Simulation (BDSIM)”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5138, unpublished.
[n] D. Schulte, G. Guignard, N. Leros, and E. T. d'Amico, “Simulation Package based on PLACET”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH082, pp. 3033-3035.
[n] P. J. Bryant, “The Creation of Small Interaction Diamonds in the CERN Intersecting Storage Rings (ISR)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 773-777.
[n] N. N. Alexeev et al., “ITEP-TWAC STATUS REPORT”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBAU02, pp. XX-XX.
[n] S. Barabin et al., “Multifunction Test-Bench For Heavy Ion Sources”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM27, pp. XX-XX.
[n] P. Jurj, R. Kamath, K. Long, J. Pasternak, and C. Rogers, “Simulation and study of the Muon Cooling Demonstrator Rectilinear Channel in BDSIM”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1048, unpublished.
[n] B. A. Baklakov, P. K. Lebedev, V. V. Parkhomchuk, A. A. Sery, V. D. Shiltsev, and A. I. Sleptsov, “Investigation of Seismic Vibrations and Relative Displacements of Linear Collider VLEPP Elements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3273-3276.
[n] A. Suwalska, A. Arnalich, F. Deperraz, M. Munoz Codoceo, and P. Ninin, “CERN SPS Sprinkler System: A Customized Industrial Solution for a Non-Conventional Site”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3313-3315. doi:10.18429/JACoW-IPAC2021-WEPAB283
[n] P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326.
[n] A. Lu, V. Kain, C. Petrone, V. Di Capua, M. Schenk, and C. Zannini, “First operational experience with data-driven hysteresis compensation for the main dipole magnets of the CERN SPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 874-877. doi:10.18429/JACoW-IPAC2024-MOPS66
[n] D. Schulte et al., “CLIC Simulations from the Start of the Linac to the Interaction Point”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI045, pp. 500-502.
[n] J. Zhao, A. Chao, X. Deng, Z. Pan, and C. Tang, “Lattice design to achieve reversible microbunching in a steady-state microbunching (SSMB) storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5611, unpublished.
[n] H. T. Lau, “Beam Tracking Simulations for Stage 1 of the Laser-Hybrid Accelerator for Radiobiological Applications (LhARA)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2939-2942. doi:10.18429/JACoW-IPAC2021-WEPAB139
[n] W. Shields et al., “A Status update of LhARA, an Accelerator-driven Radiobiology Research Initiative”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP8018, unpublished.
[n] A.-L. Perrot et al., “Configuration management of the CERN accelerators complex on the road to long shutdown 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 579-581. doi:10.18429/JACoW-IPAC2023-MOPL028
[n] A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
[n] E. Manola-Poggioli and L. Scibile, “CERN Safety Alarms Monitoring System (CSAM)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH156, pp. 2293-2295.
[n] C. Whyte and K. Long, “LhARA, the laser-hybrid accelerator for radiobiological applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5049-5051. doi:10.18429/JACoW-IPAC2023-THPM066
[n] R. Kamath et al., “Implementation and simulation of a rectilinear cooling channel in BDSIM”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 647-650. doi:10.18429/JACoW-IPAC2025-MOPS024
[n] J. I. M. Botman, H. L. Hagedoorn, and J. Reich, “The Beam Emittance of Cyclotrons with an Axial Injection System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 651-654.
[n] S. M. Pattalwar et al., “New Connection Cryostat to Insert FP420 Proton Tagging Detector in the LHC Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA001, pp. 103-105.
[n] W. Wu, X. Deng, Z. Pan, and C. Tang, “One possible approach for intrabeam scattering calculation of arbitrary phase space distributions”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5666, unpublished.
[n] J. A. Uythoven, J. I. M. Botman, and H. L. Hagedoorn, “Analytical Evaluation of Synchrotron Radiation Integrals for Isomagnetic Lattices with Rectangular Dipole Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 649-651.
[n] T. S. Dascalu et al., “Second Beam Test and Numerical Investigation of the Imperial College Plasma (Gabor) Lens Prototype”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2943-2946. doi:10.18429/JACoW-IPAC2021-WEPAB140
[n] M. Calviani et al., “Advancing Beam Energy Absorption in the Large Hadron Collider: Evolution of Beam Dumps Design and Operation From LHC Construction to High Luminosity LHC”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper THBP58, unpublished.
[n] J. Pasternak et al., “Design of LhARA - Laser Hybrid Accelerator for Radiobiological Applications”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3578-3580. doi:10.18429/JACoW-IPAC2019-THPGW001
[n] P. Fang, X. Deng, Y. Jia, Z. Pan, C. Tang, and H. Yao, “Picosecond bunch-centroid stabilization in SSMB storage rings via low-R/Q harmonic cavities and gild-based feedforward compensation”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5655, unpublished.
[n] M. Gusarova, S. Khudyakov, and M. V. Lalayan, “MultP-M Code Geometry Import Module Performance Optimization”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB07, pp. 169-170.
[n] D. Schulte and N. Leros, “Dynamic Effects in the Main Linac of CLIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH014, pp. 1687-1689.
[n] M. Geitz, G. Schmidt, and P. Schmueser, “Phase Space Tomography at the TESLA Test Facility Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA132, pp. 2175-2177.
[n] J. Bian et al., “The impact of transverse-longitudinal coupling on longitudinal microwave instability”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5653, unpublished.
[n] M. Koratzinos, G. Kirby, M. Liebsch, and C. Petrone, “Magnetic Measurements at Warm of the First FCC-ee Final Focus Quadrupole Prototype”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3777-3780. doi:10.18429/JACoW-IPAC2021-THPAB013
[n] C. Tang, W. Huang, X. Deng, and Z. Pan, “Impact of initial energy spread on the accuracy of energy spread growth formula in a free electron laser”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5652, unpublished.
[n] F. Kaether et al., “Superconducting Dipole Magnets for the SIS100 Synchrotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2401-2404. doi:10.18429/JACoW-IPAC2021-TUPAB378
[n] J. TAMAZIRT, R. Kieffer, and A. Martens, “Simulation studies for FCC-ee Compton polarimeters”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6033, unpublished.
[n] W. Shields, A. Kurup, H. T. Lau, K. R. Long, and J. Pasternak, “Simulations of the Stage 2 FFA Injection Line of LhARA for Evaluating Beam Transport Performance”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4495-4498. doi:10.18429/JACoW-IPAC2021-THPAB359
[n] M. Maxouti et al., “Design of an ion-acoustics proof-of-principle experiment for LhARA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2438-2441. doi:10.18429/JACoW-IPAC2024-WEPG91
[n] S. Evrard et al., “Consolidation of personnel safety systems at CERN”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3000-3002. doi:10.18429/JACoW-IPAC2025-THPS022
For LaTeX
Use Complete Form
For BibTeX
References
- G. Golluccio et al., “Instruments and Methods for the Magnetic Measurement of the Super-FRS Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1183-1185.
- T. Fabry, M. Baudin, B. Feral, L. Vanherpe, and L. Tabourot, “Intervention Modelling at High-energy Particle Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1814-1816.
- T. Kramer, Wr. Neustadt, W. Bartmann, C. Bracco, B. Goddard, and M. Meddahi, “Performance Studies for Protection against Asynchronous Dumps in the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB063, pp. 1662-1664.
- S. Russenschuck, G. Caiafa, L. Fiscarelli, M. Liebsch, C. Petrone, and P. Rogacki, “Challenges in Extracting Pseudo-Multipoles From Magnetic Measurements”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 87-92.
- P. J. Bryant, “Antiprotons in the ISR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2047-2050.
- M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
- W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
- N. Leros and D. Schulte, “Static Beam-Based Alignment of the RF Structures in the CLIC Main Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI059, pp. 461-463.
- P. J. Bryant, “AUSTRON, A Central European Pulsed Spallation Neutron Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF204, pp. 108-112.
- A. Meseck, “The Impact of the Space Charge on the STARS Performance”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH056, pp. 374-377.
- D. A. G. Neet, “Beam Profile Monitors for Fast and Slow Extracted Proton Beams”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 914-919.
- S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
- T. Hakulinen et al., “Integration of CATIA/SMARTEAM into CERN's Corporate Engineering Data Management System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC130, pp. 1374-1376.
- P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 408-412.
- R. T. Neuenschwander, L. Liu, S. R. Marques, A. R. D. Rodrigues, and R. M. Seraphim, “Engineering Challenges of Future Light Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1308-1313.
- S. R. Conviser, “The Stanford Two-Mile Linear Accelerator Vacuum System”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 699-705.
- C. C. Iliescu, “Pole Face Shape Design in High-Energy Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 387-392.
- J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
- J. I. M. Botman and H. L. Hagedoorn, “EUTERPE, A Ring Facility for the Eindhoven Cyclotron Laboratory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 488-491.
- W. A. Ortiz, R. T. Neuenschwander, and F. W. B. Talarico, “Magnetic Measurements at LNLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 378-381.
- A. R. D. Rodrigues et al., “Sirius Light Source Status Report”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2886-2889.
- M. Bajko et al., “Geometric and Magnetic Axes of the LHC Dipole”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH071, pp. 3392-3394.
- P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 401-404.
- K. Brand and J. P. Gourber, “A Magnetic Beam Positron Detector”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1812-1815.
- K. Diamantis, M. Bonora-Tam, M. Buzio, V. Di Capua, and D. Giloteaux, “Online performance monitoring and early fault detection for the B-train real-time field measurement systems at CERN”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6136, this conference.
- H. H. Tsai, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, and H. C. Li, “Efficiency Analysis for the Cryogenic System at NSRRC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD044, pp. 2512-2514.
- H. Brochna, “Effect of Nuclear Radiation on Magent Insulation in High-Energy Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 683-689.
- V. V. Parkhomchuk, A. A. Sery, and D. Shiltsev, “Compensation of Coherent Tune Shift of Betatron Oscillation in Storage Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 529-532.
- F. Schutte, H. L. Hagedoorn, G. C. L. van Heusden, and A. J. M. van Vliet, “The Automatic Control of the Eindhoven A.V.F. Cyclotron II: Measurements”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 524-531.
- J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
- A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 781-784.
- J. Tinlot and D. Green, “A Storage Ring for 10 BeV Muons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 470-476.
- E. L. Hoyt and E. L. Garwin, “Accelerator Vacuum Problems: In-Line Oil Trapping Between the Stanford Linear Accelerator and the Beam Switchyard”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 740-743.
- P. J. Bryant, “AGILE, A Tool for Interactive Lattice Design”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B03, pp. 1357-1359.
- M. Bajko, F. Savary, and W. Scandale, “Geometry and Alignment Requirements for the LHC Main Dipole”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A07, pp. 2160-2162.
- J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1405-1408.
- S. Keskar, H. Bartosik, and C. Carli, “A low Energy Polarizer Ring for FCC-ee”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5048, this conference.
- F. S. Reinath and D. T. Scalise, “Design Concepts of Modern Accelerator Vacuum Systems - Prediction vs. Experimental Data”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 734-740.
- W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB103, pp. 1155-1158.
- A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2811-2814.
- E. Sanchez-Corral Mena et al., “Data Management and Tools for the Access to the Radiological Areas at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC057, pp. 226-229.
- T. Pettersson et al., “LHC Access System: from Design to Operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC129, pp. 1371-1373.
- X. Y. Chang et al., “Study of Secondary Emission Enhanced Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE042, pp. 2711-2713.
- K. K. Gillies et al., “Trends in Software for Large Astronomy Projects”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOAB03, pp. 13-17.
- N. Leros and D. Schulte, “Feedback Response in the CLIC Main Linac to Transverse and Longitudinal Dynamic Imperfections”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI060, pp. 464-466.
- P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037.
- T. W. Birtwistle et al., “360 Degree Panoramic Photographs During the Long Shutdown 2 of the CERN Machines and Facilities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3410-3412.
- C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2624-2627.
- S. Alden et al., “Progress and Developments of Beam Delivery Simulation (BDSIM)”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5138, this conference.
- D. Schulte, G. Guignard, N. Leros, and E. T. d'Amico, “Simulation Package based on PLACET”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH082, pp. 3033-3035.
- P. J. Bryant, “The Creation of Small Interaction Diamonds in the CERN Intersecting Storage Rings (ISR)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 773-777.
- N. N. Alexeev et al., “ITEP-TWAC STATUS REPORT”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBAU02, pp. XX-XX.
- S. Barabin et al., “Multifunction Test-Bench For Heavy Ion Sources”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM27, pp. XX-XX.
- P. Jurj, R. Kamath, K. Long, J. Pasternak, and C. Rogers, “Simulation and study of the Muon Cooling Demonstrator Rectilinear Channel in BDSIM”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1048, this conference.
- B. A. Baklakov, P. K. Lebedev, V. V. Parkhomchuk, A. A. Sery, V. D. Shiltsev, and A. I. Sleptsov, “Investigation of Seismic Vibrations and Relative Displacements of Linear Collider VLEPP Elements”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3273-3276.
- A. Suwalska, A. Arnalich, F. Deperraz, M. Munoz Codoceo, and P. Ninin, “CERN SPS Sprinkler System: A Customized Industrial Solution for a Non-Conventional Site”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3313-3315.
- P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326.
- A. Lu, V. Kain, C. Petrone, V. Di Capua, M. Schenk, and C. Zannini, “First operational experience with data-driven hysteresis compensation for the main dipole magnets of the CERN SPS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS66, pp. 874-877.
- D. Schulte et al., “CLIC Simulations from the Start of the Linac to the Interaction Point”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI045, pp. 500-502.
- J. Zhao, A. Chao, X. Deng, Z. Pan, and C. Tang, “Lattice design to achieve reversible microbunching in a steady-state microbunching (SSMB) storage ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5611, this conference.
- H. T. Lau, “Beam Tracking Simulations for Stage 1 of the Laser-Hybrid Accelerator for Radiobiological Applications (LhARA)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2939-2942.
- W. Shields et al., “A Status update of LhARA, an Accelerator-driven Radiobiology Research Initiative”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP8018, this conference.
- A.-L. Perrot et al., “Configuration management of the CERN accelerators complex on the road to long shutdown 3”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL028, pp. 579-581.
- A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
- E. Manola-Poggioli and L. Scibile, “CERN Safety Alarms Monitoring System (CSAM)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH156, pp. 2293-2295.
- C. Whyte and K. Long, “LhARA, the laser-hybrid accelerator for radiobiological applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM066, pp. 5049-5051.
- R. Kamath et al., “Implementation and simulation of a rectilinear cooling channel in BDSIM”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS024, pp. 647-650.
- J. I. M. Botman, H. L. Hagedoorn, and J. Reich, “The Beam Emittance of Cyclotrons with an Axial Injection System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 651-654.
- S. M. Pattalwar et al., “New Connection Cryostat to Insert FP420 Proton Tagging Detector in the LHC Ring”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA001, pp. 103-105.
- W. Wu, X. Deng, Z. Pan, and C. Tang, “One possible approach for intrabeam scattering calculation of arbitrary phase space distributions”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5666, this conference.
- J. A. Uythoven, J. I. M. Botman, and H. L. Hagedoorn, “Analytical Evaluation of Synchrotron Radiation Integrals for Isomagnetic Lattices with Rectangular Dipole Magnets”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 649-651.
- T. S. Dascalu et al., “Second Beam Test and Numerical Investigation of the Imperial College Plasma (Gabor) Lens Prototype”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2943-2946.
- M. Calviani et al., “Advancing Beam Energy Absorption in the Large Hadron Collider: Evolution of Beam Dumps Design and Operation From LHC Construction to High Luminosity LHC”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP58, unpublished.
- J. Pasternak et al., “Design of LhARA - Laser Hybrid Accelerator for Radiobiological Applications”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3578-3580.
- P. Fang, X. Deng, Y. Jia, Z. Pan, C. Tang, and H. Yao, “Picosecond bunch-centroid stabilization in SSMB storage rings via low-R/Q harmonic cavities and gild-based feedforward compensation”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5655, this conference.
- M. Gusarova, S. Khudyakov, and M. V. Lalayan, “MultP-M Code Geometry Import Module Performance Optimization”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB07, pp. 169-170.
- D. Schulte and N. Leros, “Dynamic Effects in the Main Linac of CLIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH014, pp. 1687-1689.
- M. Geitz, G. Schmidt, and P. Schmueser, “Phase Space Tomography at the TESLA Test Facility Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA132, pp. 2175-2177.
- J. Bian et al., “The impact of transverse-longitudinal coupling on longitudinal microwave instability”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5653, this conference.
- M. Koratzinos, G. Kirby, M. Liebsch, and C. Petrone, “Magnetic Measurements at Warm of the First FCC-ee Final Focus Quadrupole Prototype”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3777-3780.
- C. Tang, W. Huang, X. Deng, and Z. Pan, “Impact of initial energy spread on the accuracy of energy spread growth formula in a free electron laser”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5652, this conference.
- F. Kaether et al., “Superconducting Dipole Magnets for the SIS100 Synchrotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2401-2404.
- J. TAMAZIRT, R. Kieffer, and A. Martens, “Simulation studies for FCC-ee Compton polarimeters”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6033, this conference.
- W. Shields, A. Kurup, H. T. Lau, K. R. Long, and J. Pasternak, “Simulations of the Stage 2 FFA Injection Line of LhARA for Evaluating Beam Transport Performance”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4495-4498.
- M. Maxouti et al., “Design of an ion-acoustics proof-of-principle experiment for LhARA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG91, pp. 2438-2441.
- S. Evrard et al., “Consolidation of personnel safety systems at CERN”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS022, pp. 3000-3002.
Back to search